Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread Rick Boucher 
Thanks for the feed back.  Will be re-evaluating the installs.

Rick
-


Rick Boucher
Webmaster / Systems Admin
Orcas Online / San Juan Web  
(360) 376-6411
http://www.orcasonline.com 
http://www.sanjuanweb.com
The information source for the San Juan Islands



Plans for the next day - "Work, work from early to late. In fact
I have so much to do that I shall spend the first three hours in prayer."
- Martin Luther


> On Sep 29, 2017, at 7:06 AM, Clay Stewart  wrote:
> 
> Rick, on your issue, the ToughSwitch is a UBNT failed product in my opinion. 
> They do not hold up with ESDs or worse, and have issues with Flow Control. No 
> company has a perfect line of products, there is always going to be one need 
> improvement here and there, or dropped. The EdgePoints are EdgeSwitch or 
> EdgeRouter based. We use the 16 port EdgeSwitched based one. We also use 
> quite a bit of Netonixs where we drop lines down to the base of towers. But 
> the EdgePoints allow an easy solution for running fiber up to the top and 
> removing ESD potential while having a clean outdoor mount with low wind load 
> for any size tower.
> 
> On Fri, Sep 29, 2017 at 9:38 AM, James Wilson  wrote:
> I for one am disappointed in the new switches and routers.  My head is full 
> of command line commands and options from decades of different devices and 
> OSs.  I want GUIs from now on!
> 
> And I want the same look and feel across Ubiquiti devices!
> 
> On Fri, Sep 29, 2017 at 9:34 AM, Clay Stewart  
> wrote:
> Opposite experience here. Then a lot has changed in last few years, like the 
> latest> https://www.ubnt.com/edgemax/edgerouter-infinity/
> 
> The biggest issue I have seen over the years is people not learning the CLI 
> and resulting capability.
> 
> 
> 
> On Fri, Sep 29, 2017 at 9:02 AM, David Funderburk  
> wrote:
> How long have you had the EdgePoint in service? We had deployed a number of 
> Ubiquiti routers but ended up pulling them all out.  Once they were in 
> service a little over a year we had MANY ghost issues crop up with them.  Our 
> latency went down and stability went up after removing them. 
> 
> 
> Regards,
> 
> David Funderburk
> GlobalVision
> 864-569-0703
> On 29/09/2017 08:39, Clay Stewart wrote:
> 
>> Consider an EdgePoint, we have not lost one and have deployed many. Powered 
>> by cat5 or wires. A real switch.
>> 
>> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher  
>> wrote:
>> Looking for a good POE splitter to power up a ToughSwitch POE on n install 
>> about 75ft up.
>> 
>> Source inserts power at base (in house) then powers ToughSwitchPOE on Roof. 
>> ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>> 
>> Anyone using a good splitter for powering the TSPOE?
>> 
>> Rick
>> 
>> -
>> 
>> 
>> Rick Boucher
>> Webmaster / Systems Admin
>> Orcas Online / San Juan Web
>> (360) 376-6411
>> http://www.orcasonline.com
>> http://www.sanjuanweb.com
>> The information source for the San Juan Islands
>> 
>> 
>> 
>> Plans for the next day - "Work, work from early to late. In fact
>> I have so much to do that I shall spend the first three hours in prayer."
>> - Martin Luther
>> 
>> 
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>> 
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> 
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> 
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread RickG 
I almost switched to the UBNT Infinity. So you're liking them Clay?

On Fri, Sep 29, 2017 at 9:34 AM, Clay Stewart 
wrote:

> Opposite experience here. Then a lot has changed in last few years, like
> the latest> https://www.ubnt.com/edgemax/edgerouter-infinity/
>
> The biggest issue I have seen over the years is people not learning the
> CLI and resulting capability.
>
>
>
> On Fri, Sep 29, 2017 at 9:02 AM, David Funderburk 
> wrote:
>
>> How long have you had the EdgePoint in service? We had deployed a number
>> of Ubiquiti routers but ended up pulling them all out.  Once they were in
>> service a little over a year we had MANY ghost issues crop up with them.
>> Our latency went down and stability went up after removing them.
>>
>> Regards,
>>
>> David Funderburk
>> GlobalVision
>> 864-569-0703 <(864)%20569-0703>
>>
>> On 29/09/2017 08:39, Clay Stewart wrote:
>>
>> Consider an EdgePoint, we have not lost one and have deployed many.
>> Powered by cat5 or wires. A real switch.
>>
>> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher 
>> wrote:
>>
>>> Looking for a good POE splitter to power up a ToughSwitch POE on n
>>> install about 75ft up.
>>>
>>> Source inserts power at base (in house) then powers ToughSwitchPOE on
>>> Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>>>
>>> Anyone using a good splitter for powering the TSPOE?
>>>
>>> Rick
>>>
>>> -
>>>
>>>
>>> Rick Boucher
>>> Webmaster / Systems Admin
>>> Orcas Online / San Juan Web
>>> (360) 376-6411
>>> http://www.orcasonline.com
>>> http://www.sanjuanweb.com
>>> The information source for the San Juan Islands
>>>
>>>
>>>
>>> Plans for the next day - "Work, work from early to late. In fact
>>> I have so much to do that I shall spend the first three hours in prayer."
>>> - Martin Luther
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>


-- 
-RickG
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread RickG 
I like the Edgepoints but it's hard to give up Netonix switches!

On Fri, Sep 29, 2017 at 8:39 AM, Clay Stewart 
wrote:

> Consider an EdgePoint, we have not lost one and have deployed many.
> Powered by cat5 or wires. A real switch.
>
> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher 
> wrote:
>
>> Looking for a good POE splitter to power up a ToughSwitch POE on n
>> install about 75ft up.
>>
>> Source inserts power at base (in house) then powers ToughSwitchPOE on
>> Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>>
>> Anyone using a good splitter for powering the TSPOE?
>>
>> Rick
>>
>> -
>>
>>
>> Rick Boucher
>> Webmaster / Systems Admin
>> Orcas Online / San Juan Web
>> (360) 376-6411
>> http://www.orcasonline.com
>> http://www.sanjuanweb.com
>> The information source for the San Juan Islands
>>
>>
>>
>> Plans for the next day - "Work, work from early to late. In fact
>> I have so much to do that I shall spend the first three hours in prayer."
>> - Martin Luther
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>


-- 
-RickG
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread Clay Stewart 
Rick, on your issue, the ToughSwitch is a UBNT failed product in my
opinion. They do not hold up with ESDs or worse, and have issues with Flow
Control. No company has a perfect line of products, there is always going
to be one need improvement here and there, or dropped. The EdgePoints are
EdgeSwitch or EdgeRouter based. We use the 16 port EdgeSwitched based one.
We also use quite a bit of Netonixs where we drop lines down to the base of
towers. But the EdgePoints allow an easy solution for running fiber up to
the top and removing ESD potential while having a clean outdoor mount with
low wind load for any size tower.

On Fri, Sep 29, 2017 at 9:38 AM, James Wilson  wrote:

> I for one am disappointed in the new switches and routers.  My head is
> full of command line commands and options from decades of different devices
> and OSs.  I want GUIs from now on!
>
> And I want the same look and feel across Ubiquiti devices!
>
> On Fri, Sep 29, 2017 at 9:34 AM, Clay Stewart 
> wrote:
>
>> Opposite experience here. Then a lot has changed in last few years, like
>> the latest> https://www.ubnt.com/edgemax/edgerouter-infinity/
>>
>> The biggest issue I have seen over the years is people not learning the
>> CLI and resulting capability.
>>
>>
>>
>> On Fri, Sep 29, 2017 at 9:02 AM, David Funderburk > > wrote:
>>
>>> How long have you had the EdgePoint in service? We had deployed a number
>>> of Ubiquiti routers but ended up pulling them all out.  Once they were in
>>> service a little over a year we had MANY ghost issues crop up with them.
>>> Our latency went down and stability went up after removing them.
>>>
>>> Regards,
>>>
>>> David Funderburk
>>> GlobalVision
>>> 864-569-0703 <(864)%20569-0703>
>>>
>>> On 29/09/2017 08:39, Clay Stewart wrote:
>>>
>>> Consider an EdgePoint, we have not lost one and have deployed many.
>>> Powered by cat5 or wires. A real switch.
>>>
>>> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher 
>>> wrote:
>>>
 Looking for a good POE splitter to power up a ToughSwitch POE on n
 install about 75ft up.

 Source inserts power at base (in house) then powers ToughSwitchPOE on
 Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5)

 Anyone using a good splitter for powering the TSPOE?

 Rick

 -


 Rick Boucher
 Webmaster / Systems Admin
 Orcas Online / San Juan Web
 (360) 376-6411
 http://www.orcasonline.com
 http://www.sanjuanweb.com
 The information source for the San Juan Islands



 Plans for the next day - "Work, work from early to late. In fact
 I have so much to do that I shall spend the first three hours in
 prayer."
 - Martin Luther


 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread James Wilson 
I for one am disappointed in the new switches and routers.  My head is full
of command line commands and options from decades of different devices and
OSs.  I want GUIs from now on!

And I want the same look and feel across Ubiquiti devices!

On Fri, Sep 29, 2017 at 9:34 AM, Clay Stewart 
wrote:

> Opposite experience here. Then a lot has changed in last few years, like
> the latest> https://www.ubnt.com/edgemax/edgerouter-infinity/
>
> The biggest issue I have seen over the years is people not learning the
> CLI and resulting capability.
>
>
>
> On Fri, Sep 29, 2017 at 9:02 AM, David Funderburk 
> wrote:
>
>> How long have you had the EdgePoint in service? We had deployed a number
>> of Ubiquiti routers but ended up pulling them all out.  Once they were in
>> service a little over a year we had MANY ghost issues crop up with them.
>> Our latency went down and stability went up after removing them.
>>
>> Regards,
>>
>> David Funderburk
>> GlobalVision
>> 864-569-0703 <(864)%20569-0703>
>>
>> On 29/09/2017 08:39, Clay Stewart wrote:
>>
>> Consider an EdgePoint, we have not lost one and have deployed many.
>> Powered by cat5 or wires. A real switch.
>>
>> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher 
>> wrote:
>>
>>> Looking for a good POE splitter to power up a ToughSwitch POE on n
>>> install about 75ft up.
>>>
>>> Source inserts power at base (in house) then powers ToughSwitchPOE on
>>> Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>>>
>>> Anyone using a good splitter for powering the TSPOE?
>>>
>>> Rick
>>>
>>> -
>>>
>>>
>>> Rick Boucher
>>> Webmaster / Systems Admin
>>> Orcas Online / San Juan Web
>>> (360) 376-6411
>>> http://www.orcasonline.com
>>> http://www.sanjuanweb.com
>>> The information source for the San Juan Islands
>>>
>>>
>>>
>>> Plans for the next day - "Work, work from early to late. In fact
>>> I have so much to do that I shall spend the first three hours in prayer."
>>> - Martin Luther
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread Clay Stewart 
Opposite experience here. Then a lot has changed in last few years, like
the latest> https://www.ubnt.com/edgemax/edgerouter-infinity/

The biggest issue I have seen over the years is people not learning the CLI
and resulting capability.



On Fri, Sep 29, 2017 at 9:02 AM, David Funderburk 
wrote:

> How long have you had the EdgePoint in service? We had deployed a number
> of Ubiquiti routers but ended up pulling them all out.  Once they were in
> service a little over a year we had MANY ghost issues crop up with them.
> Our latency went down and stability went up after removing them.
>
> Regards,
>
> David Funderburk
> GlobalVision
> 864-569-0703 <(864)%20569-0703>
>
> On 29/09/2017 08:39, Clay Stewart wrote:
>
> Consider an EdgePoint, we have not lost one and have deployed many.
> Powered by cat5 or wires. A real switch.
>
> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher 
> wrote:
>
>> Looking for a good POE splitter to power up a ToughSwitch POE on n
>> install about 75ft up.
>>
>> Source inserts power at base (in house) then powers ToughSwitchPOE on
>> Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>>
>> Anyone using a good splitter for powering the TSPOE?
>>
>> Rick
>>
>> -
>>
>>
>> Rick Boucher
>> Webmaster / Systems Admin
>> Orcas Online / San Juan Web
>> (360) 376-6411
>> http://www.orcasonline.com
>> http://www.sanjuanweb.com
>> The information source for the San Juan Islands
>>
>>
>>
>> Plans for the next day - "Work, work from early to late. In fact
>> I have so much to do that I shall spend the first three hours in prayer."
>> - Martin Luther
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread David Funderburk 
 

How long have you had the EdgePoint in service? We had deployed a number
of Ubiquiti routers but ended up pulling them all out. Once they were in
service a little over a year we had MANY ghost issues crop up with them.
Our latency went down and stability went up after removing them. 

 Regards,

 David Funderburk
 GlobalVision
 864-569-0703 

On 29/09/2017 08:39, Clay Stewart wrote: 

> Consider an EdgePoint, we have not lost one and have deployed many. Powered 
> by cat5 or wires. A real switch. 
> 
> On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher  wrote:
> 
>> Looking for a good POE splitter to power up a ToughSwitch POE on n install 
>> about 75ft up.
>> 
>> Source inserts power at base (in house) then powers ToughSwitchPOE on Roof. 
>> ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>> 
>> Anyone using a good splitter for powering the TSPOE?
>> 
>> Rick
>> 
>> -
>> 
>> Rick Boucher
>> Webmaster / Systems Admin
>> Orcas Online / San Juan Web
>> (360) 376-6411 [1]
>> http://www.orcasonline.com [2]
>> http://www.sanjuanweb.com [3]
>> The information source for the San Juan Islands
>> 
>> Plans for the next day - "Work, work from early to late. In fact
>> I have so much to do that I shall spend the first three hours in prayer."
>> - Martin Luther
>> 
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless [4]
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless [4]
 

Links:
--
[1] tel:%28360%29%20376-6411
[2] http://www.orcasonline.com
[3] http://www.sanjuanweb.com
[4] http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] POE splitter for ToughSwitch

2017-09-29 Thread Clay Stewart 
Consider an EdgePoint, we have not lost one and have deployed many. Powered
by cat5 or wires. A real switch.

On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher 
wrote:

> Looking for a good POE splitter to power up a ToughSwitch POE on n install
> about 75ft up.
>
> Source inserts power at base (in house) then powers ToughSwitchPOE on
> Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5)
>
> Anyone using a good splitter for powering the TSPOE?
>
> Rick
>
> -
>
>
> Rick Boucher
> Webmaster / Systems Admin
> Orcas Online / San Juan Web
> (360) 376-6411
> http://www.orcasonline.com
> http://www.sanjuanweb.com
> The information source for the San Juan Islands
>
>
>
> Plans for the next day - "Work, work from early to late. In fact
> I have so much to do that I shall spend the first three hours in prayer."
> - Martin Luther
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] POE splitter for ToughSwitch

2017-09-28 Thread Rick Boucher 
Looking for a good POE splitter to power up a ToughSwitch POE on n install 
about 75ft up.

Source inserts power at base (in house) then powers ToughSwitchPOE on Roof. 
ToughSwitch then powers 4 UBNT 24V devices (maybe 5)

Anyone using a good splitter for powering the TSPOE?

Rick

-


Rick Boucher
Webmaster / Systems Admin
Orcas Online / San Juan Web  
(360) 376-6411
http://www.orcasonline.com 
http://www.sanjuanweb.com
The information source for the San Juan Islands



Plans for the next day - "Work, work from early to late. In fact
I have so much to do that I shall spend the first three hours in prayer."
- Martin Luther


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless