Re: [WISPA] NS2 Ethernet issue
Any inf on where to get the ethernet chip? I have more than a box full of NS2's with bad ethernet ports. Julius Igugu Webcenta Wireless. On 7/15/2010 12:55 AM, Philip Dorr wrote: Those that we have had the Ethernet go dead, but the wireless still works, we replace the Ethernet chip on and they work fine. Since using shielded CAT5E, we have not lost any radios that had shielded cable and a Ubiquti PoE supply. If we lose one and it has unshielded wire, then we replace the wire with shielded wire and the radio with a repaired radio (or a new radio if we do not currently have a repaired radio). On Wed, Jul 14, 2010 at 6:44 PM, Josh Luthman j...@imaginenetworksllc.com wrote: I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org
Re: [WISPA] NS2 Ethernet issue
This is the chip on the NS2: http://parts.digikey.com/1/parts/492238-ic-txrx-phy-10-100-2-5v-48-ssop-ksz8721b.html or http://www.newark.com/micrel/ksz8721b/transceiver-ic/dp/27K7644 Scottie Any inf on where to get the ethernet chip? I have more than a box full of NS2's with bad ethernet ports. Julius Igugu Webcenta Wireless. On 7/15/2010 12:55 AM, Philip Dorr wrote: Those that we have had the Ethernet go dead, but the wireless still works, we replace the Ethernet chip on and they work fine. Since using shielded CAT5E, we have not lost any radios that had shielded cable and a Ubiquti PoE supply. If we lose one and it has unshielded wire, then we replace the wire with shielded wire and the radio with a repaired radio (or a new radio if we do not currently have a repaired radio). On Wed, Jul 14, 2010 at 6:44 PM, Josh Luthman j...@imaginenetworksllc.com wrote: I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless
Re: [WISPA] NS2 Ethernet issue
And. If you don't have a hot air solder station for the SMD chips, like me also, I use ChipQuik to remove the old damaged chip. Smooth as can be. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scottie Arnett Sent: Thursday, July 15, 2010 11:05 AM To: WISPA General List Subject: Re: [WISPA] NS2 Ethernet issue This is the chip on the NS2: http://parts.digikey.com/1/parts/492238-ic-txrx-phy-10-100-2-5v-48-ssop-ksz8 721b.html or http://www.newark.com/micrel/ksz8721b/transceiver-ic/dp/27K7644 Scottie Any inf on where to get the ethernet chip? I have more than a box full of NS2's with bad ethernet ports. Julius Igugu Webcenta Wireless. On 7/15/2010 12:55 AM, Philip Dorr wrote: Those that we have had the Ethernet go dead, but the wireless still works, we replace the Ethernet chip on and they work fine. Since using shielded CAT5E, we have not lost any radios that had shielded cable and a Ubiquti PoE supply. If we lose one and it has unshielded wire, then we replace the wire with shielded wire and the radio with a repaired radio (or a new radio if we do not currently have a repaired radio). On Wed, Jul 14, 2010 at 6:44 PM, Josh Luthman j...@imaginenetworksllc.com wrote: I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless
Re: [WISPA] NS2 Ethernet issue
Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
Have you had any lightning? Greg On Jul 14, 2010, at 4:41 PM, Mark McElvy wrote: Curious if other have seen issue with bad Ethernet ports on NS2’s. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2’s so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE’s (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com mailto:mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org mailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org mailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org mailto:wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com http://www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org mailto:wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patient sa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today!http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
Those that we have had the Ethernet go dead, but the wireless still works, we replace the Ethernet chip on and they work fine. Since using shielded CAT5E, we have not lost any radios that had shielded cable and a Ubiquti PoE supply. If we lose one and it has unshielded wire, then we replace the wire with shielded wire and the radio with a repaired radio (or a new radio if we do not currently have a repaired radio). On Wed, Jul 14, 2010 at 6:44 PM, Josh Luthman j...@imaginenetworksllc.com wrote: I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patient sa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
Maybe it's my bad luck or I got a bad batch but I lost 4 last week:-( On 7/14/2010 6:44 PM, Josh Luthman wrote: --===1574374465== Content-Type: multipart/alternative; boundary=001636163cc9511a71048b6192be --001636163cc9511a71048b6192be Content-Type: text/plain; charset=ISO-8859-1 I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today!http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ --001636163cc9511a71048b6192be Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I#39;ve had two NS2s go bad ever (been 9 months since I started using them= ).=A0 One doesn#39;t turn on at all and the other one is unable to do Ethe= rnet link/activity (powers on, wireless works).brbr clear=3DallJosh L= uthmanbr Office: 937-552-2340brDirect: 937-552-2343br1100 Wayne StbrSuite 1337= brTroy, OH 45373br brbrdiv class=3Dgmail_quoteOn Wed, Jul 14, 2010 at 7:35 PM, Jim Pat= ientspan dir=3Dltrlt;a href=3Dmailto:sa...@jeffcosoho.com;sa...@je= ffcosoho.com/agt;/span wrote:brblockquote class=3Dgmail_quote sty= le=3Dborder-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex;= padding-left: 1ex; =20 =20 =20 div bgcolor=3D#ff text=3D#00 I have a box full of them that have the same issue.=A0 Ben told me to use shielded cable for client installs.br Not that I haven#39;t had a MT get hit
Re: [WISPA] NS2 Ethernet issue
I've noticed that the NSM2's do better then the NS2's. We've blown a few NS2's, But never a NSM2, or any other radio in the M series now that I think about it, If I recall correctly. And were in florida :D We had a tower take a hit, blew a power station or two and the tower switch, all ubnt M devices were fine. Nick Olsen Network Operations (321) 205-1100 x106 From: Jim Patient sa...@jeffcosoho.com Sent: Wednesday, July 14, 2010 7:59 PM To: WISPA General List wireless@wispa.org Subject: Re: [WISPA] NS2 Ethernet issue Maybe it's my bad luck or I got a bad batch but I lost 4 last week:-( On 7/14/2010 6:44 PM, Josh Luthman wrote: --===1574374465== Content-Type: multipart/alternative; boundary=001636163cc9511a71048b6192be --001636163cc9511a71048b6192be Content-Type: text/plain; charset=ISO-8859-1 I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today!http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ --001636163cc9511a71048b6192be Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I#39;ve had two NS2s go bad ever (been 9 months since I started using them= ).=A0 One doesn#39;t turn on at all and the other one is unable to do Ethe= rnet link/activity (powers on, wireless works).brbr clear=3DallJosh L= uthmanbr Office: 937-552-2340brDirect: 937-552
Re: [WISPA] NS2 Ethernet issue
I'm in the Amazon and we have very intense lightning. We've never had a direct strike but we get very very close nearby strikes which induce high voltages into anything that can act like an antenna. We're running PS2's, NSM5's and a BulletM2. We lost some gear connected to the PS2's (though never a PS2 itself) before I isolated the PS2's from their mounts. The PS2's electronics have continuity to the mounting bracket. The gear was on a metal mount on a metal roof of a wooden house (roof not grounded) and the PS2 and it's associated ethernet cable were acting like a drain for the roof, zapping what was on the other end when ever lightning induced high voltage in the roof. Now I keep the PS2's isolated from their mount (with a piece of plastic tubing between the mount and PS2's bracket) and I have ethernet lightning protection at the POE end. The NS5M's and the Bullet have been no problem. Greg On Jul 14, 2010, at 8:30 PM, Nick Olsen wrote: I've noticed that the NSM2's do better then the NS2's. We've blown a few NS2's, But never a NSM2, or any other radio in the M series now that I think about it, If I recall correctly. And were in florida :D We had a tower take a hit, blew a power station or two and the tower switch, all ubnt M devices were fine. Nick Olsen Network Operations (321) 205-1100 x106 From: Jim Patient sa...@jeffcosoho.com Sent: Wednesday, July 14, 2010 7:59 PM To: WISPA General List wireless@wispa.org Subject: Re: [WISPA] NS2 Ethernet issue Maybe it's my bad luck or I got a bad batch but I lost 4 last week:-( On 7/14/2010 6:44 PM, Josh Luthman wrote: --===1574374465== Content-Type: multipart/alternative; boundary=001636163cc9511a71048b6192be --001636163cc9511a71048b6192be Content-Type: text/plain; charset=ISO-8859-1 I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today!http://signup.wispa.org
Re: [WISPA] NS2 Ethernet issue
Michael? He makes you call him Michael??? Sigh... Bob- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Wednesday, July 14, 2010 6:05 PM To: WISPA General List Subject: Re: [WISPA] NS2 Ethernet issue I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
Had lots of that on the M series Bullets. Time for the big ol' RMA! -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:25 PM To: WISPA General List Subject: Re: [WISPA] NS2 Ethernet issue Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
I use the shielded, flooded cable religiously and have yet to lose a Bullet or Rocket unless water got in. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jim Patient Sent: Wednesday, July 14, 2010 7:36 PM To: WISPA General List Subject: Re: [WISPA] NS2 Ethernet issue I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] NS2 Ethernet issue
Shielded wire rocks! All you non-believers, go spend the extra bucks! It really makes a difference. If not... Well, enjoy paying for it on the backend. So there. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Philip Dorr Sent: Wednesday, July 14, 2010 7:55 PM To: WISPA General List Subject: Re: [WISPA] NS2 Ethernet issue Those that we have had the Ethernet go dead, but the wireless still works, we replace the Ethernet chip on and they work fine. Since using shielded CAT5E, we have not lost any radios that had shielded cable and a Ubiquti PoE supply. If we lose one and it has unshielded wire, then we replace the wire with shielded wire and the radio with a repaired radio (or a new radio if we do not currently have a repaired radio). On Wed, Jul 14, 2010 at 6:44 PM, Josh Luthman j...@imaginenetworksllc.com wrote: I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patient sa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy mmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ - --- WISPA Wants You! Join today! http://signup.wispa.org/ - --- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ - --- WISPA Wants You! Join today! http://signup.wispa.org/ - --- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NS2 Ethernet issue
Thanks for the heads up on that. Very much appreciated. Bob- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, July 14, 2010 9:16 PM To: n...@brevardwireless.com; WISPA General List Subject: Re: [WISPA] NS2 Ethernet issue I'm in the Amazon and we have very intense lightning. We've never had a direct strike but we get very very close nearby strikes which induce high voltages into anything that can act like an antenna. We're running PS2's, NSM5's and a BulletM2. We lost some gear connected to the PS2's (though never a PS2 itself) before I isolated the PS2's from their mounts. The PS2's electronics have continuity to the mounting bracket. The gear was on a metal mount on a metal roof of a wooden house (roof not grounded) and the PS2 and it's associated ethernet cable were acting like a drain for the roof, zapping what was on the other end when ever lightning induced high voltage in the roof. Now I keep the PS2's isolated from their mount (with a piece of plastic tubing between the mount and PS2's bracket) and I have ethernet lightning protection at the POE end. The NS5M's and the Bullet have been no problem. Greg On Jul 14, 2010, at 8:30 PM, Nick Olsen wrote: I've noticed that the NSM2's do better then the NS2's. We've blown a few NS2's, But never a NSM2, or any other radio in the M series now that I think about it, If I recall correctly. And were in florida :D We had a tower take a hit, blew a power station or two and the tower switch, all ubnt M devices were fine. Nick Olsen Network Operations (321) 205-1100 x106 http://www.brevardwireless.com/files/email.gif _ From: Jim Patient sa...@jeffcosoho.com Sent: Wednesday, July 14, 2010 7:59 PM To: WISPA General List wireless@wispa.org Subject: Re: [WISPA] NS2 Ethernet issue Maybe it's my bad luck or I got a bad batch but I lost 4 last week:-( On 7/14/2010 6:44 PM, Josh Luthman wrote: --===1574374465== Content-Type: multipart/alternative; boundary=001636163cc9511a71048b6192be --001636163cc9511a71048b6192be Content-Type: text/plain; charset=ISO-8859-1 I've had two NS2s go bad ever (been 9 months since I started using them). One doesn't turn on at all and the other one is unable to do Ethernet link/activity (powers on, wireless works). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 7:35 PM, Jim Patientsa...@jeffcosoho.com wrote: I have a box full of them that have the same issue. Ben told me to use shielded cable for client installs. Not that I haven't had a MT get hit a time or 2 but it seems every time I see a cloud in the sky I loose an ns2. Hopefully they'll get this fixed but for now I'm sticking with the $130 MT CPE over the ns2. Jim On 7/14/2010 5:04 PM, Josh Luthman wrote: I had that a week or two ago. Michael asked me to just go ahead and RMA - I did. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvymmce...@accubak.com wrote: Yes powered up and working fine from wireless side, no link on Ethernet Mark McElvy -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, July 14, 2010 4:14 PM To: 'WISPA General List' Subject: Re: [WISPA] NS2 Ethernet issue Is the unit still powering up from the POE ?? And you just can't talk to it? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark McElvy Sent: Wednesday, July 14, 2010 5:11 PM To: wireless@wispa.org Subject: [WISPA] NS2 Ethernet issue Curious if other have seen issue with bad Ethernet ports on NS2's. I have a customer with a strange setup and he has blown the Ethernet port on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast on a hillside, Ethernet runs 150ft down a hill to power and is plugged into a NS2 in AP mode transmitting down the hill to the house where there is another NS2 as a client to the NS2 on the hill. The issue is with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and PS2/Client to the Internet) are connected together with a crossover. Any thoughts on why just this one radio would blow the ether port? Mark McElvy No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 01:36:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo
