Re: [wsjt-devel] DXPedition test manual / FIN

[Joe Taylor]

Hi Saku,

Thanks for your translation to Finnish of the FT8 DXpedition Mode User 
Guide!

-- 73, Joe, K1JT

On 4/29/2018 2:55 PM, Saku wrote:

Hi !

I have translated ( Google did, and I fixed it to understandable Finnish 
form ;)  ) latest DXPedition mode manual's part for hounds and FAQ.


Can be found from here:
https://drive.google.com/file/d/1dA6Ca8fkfdlK6M_XLPiYim7aEIx7ta66/view?usp=sharing 



In case that someone (OH-stn) reading this list wants to share it at 
local club.




--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] v1.9.0-rc4, mode change problem

[JH3XCU]

ALL OK. Thank you Joe.

73, Hideo - JH3XCU.

- Original Message -
> To: WSJT software development 
> From: Joe Taylor 
> Date: Mon, 30 Apr 2018 09:47:53 -0400
> Subject: Re: [wsjt-devel] v1.9.0-rc4, mode change problem
> 
> 
> Hi Hideo-san,
> 
> On 4/27/2018 2:37 AM, JH3XCU wrote:
> > WSJT-X v1.9.0-rc4, mode change problem:
> > 
> > It will not be displayed correctly when WSPR - JT9etc mode changed.
> > Please see attached e-file
> > 
> > 73, Hideo - JH3XCU
> 
> 1. Use the mouse to grasp the right edge of the text window.  You can  
> set its width as you wish.
> 
> 2. Many users prefer to create and use entries on the Configurations  
> menu for switching between modes.  Instructions can be found in Section  
> 10.1.3 in the WSJT-X User Guide:
> http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-1.9.0-rc4.
html#MENUS
> Then, you can have the screen configured as you like it for each  
> operating mode.
> 
>   -- 73, Joe, K1JT
> 
> 
--
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] bug in wsjt-x v1.9.0 rc4 ??

[Neil Zampella]

Reinhard,

you have the "Enable VHF/UHF/Microwave" features checked in the GENERAL 
tab of the settings, then have the "NA VHF Contect" box checked on the 
main program page.


Then you're trying to make contacts on the 20 meter HF band.

Uncheck those settings, then you should see a proper auto sequence.

Neil, KN3ILZ


On 5/2/2018 1:38 PM, Reinhard wrote:

Dears Sirs,


please let me know, weather there is a general problem with the newest 
version from wsjt-x.


I am working with windows-7.

The problem appears when the program changes into the line to give  
the report.


See attached jpg1 - i worked R7TT and wsjt does not give Report 
R    but sends the letter R and my locator.



the manual use of the button "dB" shoes --> 7TT as information and not 
the report. See jpg2



Any hint or help is aprecciated.


73s and thanks for the great help and development for amateur radio.

yors 73

Ray DH6DAO




--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] bug in wsjt-x v1.9.0 rc4 ??

[Joe Taylor]

Hi Ray,

Probably you should not have selected "Settings -> Enable 
VHF/UHF/Microwave features", since you are operating on an HF band.


You should not select "NA VHF Contest", since you are not operating in a 
North American VHF contest.


-- 73, Joe, K1JT

On 5/2/2018 1:38 PM, Reinhard wrote:

Dears Sirs,


please let me know, weather there is a general problem with the newest 
version from wsjt-x.


I am working with windows-7.

The problem appears when the program changes into the line to give  the 
report.


See attached jpg1 - i worked R7TT and wsjt does not give Report R 
but sends the letter R and my locator.



the manual use of the button "dB" shoes --> 7TT as information and not 
the report. See jpg2



Any hint or help is aprecciated.


73s and thanks for the great help and development for amateur radio.

yors 73

Ray DH6DAO



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] using freqcal on a single VHF beacon

[Joe Taylor]

Hi Peter,

For completeness, this message is an addendum to the one sent a few 
minutes ago.


You asked whether the variance in measured frequency offsets might be 
too high.  As you point out, it goes from -126 to -131 Hz across the 30 
second period.


In your file fmt.all the variation appears to be nearly monotonic, 
drifting upward from roughly -131 to -126 Hz over the 30 s interval.  If 
your radio was already warmed up, I'd guess that this change was a 
result of propagation effects rather than any drift in the radio.


For reliable calibration of your radio you should try to make sure that 
the measured offset stays close to -129 Hz over long periods of time -- 
hours, even.  Let the calibration procedure run for a while, and then 
examine the data in fmt.all.


-- 73, Joe, K1JT

On 5/1/2018 9:12 PM, Peter Sumner wrote:

Hello,
  following suggestions from others on this list I have tried to use 
freqcal from WSJT-X 1.9.0-rc3 on a single GPS locked VHF beacon.


This beacon on 144.450 (VK5VF) runs a mixture of carrier and CW ID (on 
off keying).  Each time I run the process that is outlined in the 
documentation when I select the "solve for calibration"  I end up with 
the quite unhelpful error telling me: "Calibration error  Check fmt.all 
for possible bad data" so I dutifully look in this file to try and 
identify what is wrong (sample below)


21:34:34 144450  1  1500  1368.324  -131.676   14.5   39.8
21:34:36 144450  1  1500  1369.671  -130.329   14.9   38.5
21:34:39 144450  1  1500  1369.555  -130.445   14.8   40.1
21:34:41 144450  1  1500  1368.284  -131.716   17.2   34.2
21:34:44 144450  1  1500  1368.318  -131.682   16.5   36.1
21:35:34 144450  1  1500  1369.171  -130.829   15.9   38.1
21:35:36 144450  1  1500  1369.574  -130.426   14.9   39.5
21:35:39 144450  1  1500  1369.270  -130.730   15.8   36.2
21:35:41 144450  1  1500  1370.659  -129.341   15.4   36.1
21:35:43 144450  1  1500  1372.416  -127.584   14.9   38.3
21:35:49 144450  1  1500  1371.663  -128.337   14.8   39.2
21:36:19 144450  1  1500  1373.065  -126.935   14.7   41.5
21:36:21 144450  1  1500  1372.527  -127.473   15.7   35.2
21:36:24 144450  1  1500  1372.356  -127.644   19.3   28.5
21:36:26 144450  1  1500  1372.464  -127.536   20.3   26.5
21:36:28 144450  1  1500  1372.826  -127.174   19.7   28.8
21:36:34 144450  1  1500  1370.782  -129.218   14.8   40.4
21:36:36 144450  1  1500  1370.859  -129.141   14.9   38.2
21:36:39 144450  1  1500  1371.701  -128.299   14.7   41.4
21:36:41 144450  1  1500  1371.060  -128.940   16.1   37.6
21:36:43 144450  1  1500  1371.607  -128.393   14.8   39.4
21:36:49 144450  1  1500  1373.245  -126.755   14.8   38.1

Can any of the list members help me identify which of these lines of 
data would be in error?  Is the variance in offset too high as it goes 
from, -126 to -131 Hz across the 30 second period,  When I try a smaller 
sample I get the error telling me there is not enough information in the 
file, so that did not help,


Regards,
Peter, vk5pj


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] bug in wsjt-x v1.9.0 rc4 ??

[George Molnar]

Deselect “NA VHF Contest" Mode.


George J Molnar
Washington, DC, USA
KF2T   -   @GJMolnar









> On May 2, 2018, at 1:38 PM, Reinhard  wrote:
> 
> 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] using freqcal on a single VHF beacon

[Joe Taylor]

Hi Peter,

The semi-automated calibration procedure assumes that you will use 
calibration signals on at least two different frequencies.


You have used just one, at 144.450 MHz.  Nevertheless, I think you can 
do a good job of calibration with your existing data, using "by hand" 
the individual tools is the calibration toolkit.


Copy your file fmt.all into the "bin" directory in your WSJT-X 
installation directory.  Then open a command-prompt window, cd to that 
directory, and run program "fmtave" the file fmt.all. I get the 
following result:


C:\WSJT\wsjtx1.9.0\bin>fmtave fmt.all
Freq DFCAL   N rmsUTC Call
   (kHz)(Hz)? (Hz)

 144.450 -129.118   1   221.63  21:34:34

The somewhat cryptic output says that your dial is off by -129.118 Hz at 
144.45 MHz, a fractional error of -129.118/144.450 = -0.894 ppm (parts 
per million).  This number is the constant "B" defined in the graph 
displayed in Section 13.1 of the WSJT-X User Guide:


http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-1.9.0-rc4.html#_frequency_calibration 
 It's the value that


If you set your 2-meter dial frequency low by 129 Hz, you'll be on 
frequency.


If you're using CAT control in WSJT-X, go to Settings -> Frequencies and 
enter -0.894 for "Slope".  You can safely use 0.0 for "Intercept", which 
should be close enough.  Then you should be good to go.  :-)


-- 73, Joe, K1JT

On 5/1/2018 9:12 PM, Peter Sumner wrote:

Hello,
  following suggestions from others on this list I have tried to use 
freqcal from WSJT-X 1.9.0-rc3 on a single GPS locked VHF beacon.


This beacon on 144.450 (VK5VF) runs a mixture of carrier and CW ID (on 
off keying).  Each time I run the process that is outlined in the 
documentation when I select the "solve for calibration"  I end up with 
the quite unhelpful error telling me: "Calibration error  Check fmt.all 
for possible bad data" so I dutifully look in this file to try and 
identify what is wrong (sample below)


21:34:34 144450  1  1500  1368.324  -131.676   14.5   39.8
21:34:36 144450  1  1500  1369.671  -130.329   14.9   38.5
21:34:39 144450  1  1500  1369.555  -130.445   14.8   40.1
21:34:41 144450  1  1500  1368.284  -131.716   17.2   34.2
21:34:44 144450  1  1500  1368.318  -131.682   16.5   36.1
21:35:34 144450  1  1500  1369.171  -130.829   15.9   38.1
21:35:36 144450  1  1500  1369.574  -130.426   14.9   39.5
21:35:39 144450  1  1500  1369.270  -130.730   15.8   36.2
21:35:41 144450  1  1500  1370.659  -129.341   15.4   36.1
21:35:43 144450  1  1500  1372.416  -127.584   14.9   38.3
21:35:49 144450  1  1500  1371.663  -128.337   14.8   39.2
21:36:19 144450  1  1500  1373.065  -126.935   14.7   41.5
21:36:21 144450  1  1500  1372.527  -127.473   15.7   35.2
21:36:24 144450  1  1500  1372.356  -127.644   19.3   28.5
21:36:26 144450  1  1500  1372.464  -127.536   20.3   26.5
21:36:28 144450  1  1500  1372.826  -127.174   19.7   28.8
21:36:34 144450  1  1500  1370.782  -129.218   14.8   40.4
21:36:36 144450  1  1500  1370.859  -129.141   14.9   38.2
21:36:39 144450  1  1500  1371.701  -128.299   14.7   41.4
21:36:41 144450  1  1500  1371.060  -128.940   16.1   37.6
21:36:43 144450  1  1500  1371.607  -128.393   14.8   39.4
21:36:49 144450  1  1500  1373.245  -126.755   14.8   38.1

Can any of the list members help me identify which of these lines of 
data would be in error?  Is the variance in offset too high as it goes 
from, -126 to -131 Hz across the 30 second period,  When I try a smaller 
sample I get the error telling me there is not enough information in the 
file, so that did not help,


Regards,
Peter, vk5pj


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] using freqcal on a single VHF beacon

[Peter Sumner]

Hello,
 following suggestions from others on this list I have tried to use freqcal
from WSJT-X 1.9.0-rc3 on a single GPS locked VHF beacon.

This beacon on 144.450 (VK5VF) runs a mixture of carrier and CW ID (on off
keying).  Each time I run the process that is outlined in the documentation
when I select the "solve for calibration"  I end up with the quite
unhelpful error telling me: "Calibration error  Check fmt.all for possible
bad data" so I dutifully look in this file to try and identify what is
wrong (sample below)

21:34:34 144450  1  1500  1368.324  -131.676   14.5   39.8
21:34:36 144450  1  1500  1369.671  -130.329   14.9   38.5
21:34:39 144450  1  1500  1369.555  -130.445   14.8   40.1
21:34:41 144450  1  1500  1368.284  -131.716   17.2   34.2
21:34:44 144450  1  1500  1368.318  -131.682   16.5   36.1
21:35:34 144450  1  1500  1369.171  -130.829   15.9   38.1
21:35:36 144450  1  1500  1369.574  -130.426   14.9   39.5
21:35:39 144450  1  1500  1369.270  -130.730   15.8   36.2
21:35:41 144450  1  1500  1370.659  -129.341   15.4   36.1
21:35:43 144450  1  1500  1372.416  -127.584   14.9   38.3
21:35:49 144450  1  1500  1371.663  -128.337   14.8   39.2
21:36:19 144450  1  1500  1373.065  -126.935   14.7   41.5
21:36:21 144450  1  1500  1372.527  -127.473   15.7   35.2
21:36:24 144450  1  1500  1372.356  -127.644   19.3   28.5
21:36:26 144450  1  1500  1372.464  -127.536   20.3   26.5
21:36:28 144450  1  1500  1372.826  -127.174   19.7   28.8
21:36:34 144450  1  1500  1370.782  -129.218   14.8   40.4
21:36:36 144450  1  1500  1370.859  -129.141   14.9   38.2
21:36:39 144450  1  1500  1371.701  -128.299   14.7   41.4
21:36:41 144450  1  1500  1371.060  -128.940   16.1   37.6
21:36:43 144450  1  1500  1371.607  -128.393   14.8   39.4
21:36:49 144450  1  1500  1373.245  -126.755   14.8   38.1

Can any of the list members help me identify which of these lines of data
would be in error?  Is the variance in offset too high as it goes from,
-126 to -131 Hz across the 30 second period,  When I try a smaller sample I
get the error telling me there is not enough information in the file, so
that did not help,

Regards,
Peter, vk5pj
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible error 1.90rc4 Mac

[George Molnar]

I did not. Sorry! 


George J Molnar
Washington, DC, USA
KF2T   -   @GJMolnar









> On May 1, 2018, at 12:12 PM, Robert Nobis - N7RJN  wrote:
> 
> You are using a beta version of MacOS. Did you try this with the officially 
> released version? 10.13.4?
> 
> 
> Bob Nobis 
> n7...@nobis.net 
> 
> 
>> On May 1, 2018, at 08:57, George Molnar > > wrote:
>> 
>> I’ve had this reproducible error occur a few times now. 1.90rc4 (8642) 
>> downloaded from the WSJT-X homepage crashes when command-double clicking on 
>> the FT8 wide graph to change DF only after at least one decode cycle has 
>> completed. I had not seen this before 8642.
>> 
>> OSX 10.13.5 beta, quad core i7 with 16 GB RAM.
>> 
>> Running: /Applications/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 -e 
>> /Applications/wsjtx.app/Contents/MacOS -a 
>> "/Users/georgemolnar/Library/Application Support/WSJT-X" -t 
>> /var/folders/6j/2m5xrjn13s7c7k9fqv7vmp04gn/T/WSJT-X
>> At line 98 of file /Users/bill/src/wsjtx-svn/lib/decoder.f90 (unit = 19)
>> Fortran runtime error: Cannot open file 'fort.19': Permission denied
>> 
>> Error termination. Backtrace:
>> #0 0x10d134ab6
>> #1 0x10d135388
>> #2 0x10d1359ec
>> #3 0x10d1b5cca
>> #4 0x10d1aea5d
>> #5 0x1050f0f30
>> #6 0x1050cada2
>> #7 0x1050ca6a7
>> #8 0x10513fbae
>> 
>> 
>> George J Molnar
>> Washington, DC, USA
>> KF2T   -   @GJMolnar
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> --
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org ! 
>> http://sdm.link/slashdot___ 
>> 
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net 
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible error 1.90rc4 Mac

[Bill Somerville]

HI George and Steve,

I had a quick look at this issue a few days ago, I have not had time to 
address it fully but it is a logic error related to DXpedition mode code 
that tries to truncate a file that has not been opened, that causes a 
permission issue as the file location is not set correctly. This happens 
when nagain is set in decoder.f90, that happens when a "freeze" decode 
at the cursor frequency is invoked. I believe that normal FT8 mode 
should not be on the path that accesses this file at all.


73
Bill
G4WJS.

On 01/05/2018 17:33, Steven Franke wrote:

Hi George -

Thanks for the report. I think that the problem is being caused by a 
debug write statement that is being used for Fox/Hound debugging 
purposes --- it will be easy to fix and we will do that before the GA 
release. However, I should note that the problem is occurring because 
a double-click on the waterfall invokes the “click to decode” 
function, and initiates a call to the decoder with the deepest decode 
settings.


If you are wanting to move the Tx and Rx frequencies, then a 
command-single click should do that without calling the decoder.


Steve K9AN


On May 1, 2018, at 10:57 AM, George Molnar > wrote:


I’ve had this reproducible error occur a few times now. 1.90rc4 
(8642) downloaded from the WSJT-X homepage crashes when 
command-double clicking on the FT8 wide graph to change DF only after 
at least one decode cycle has completed. I had not seen this before 8642.


OSX 10.13.5 beta, quad core i7 with 16 GB RAM.

Running: /Applications/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 
3 -e /Applications/wsjtx.app/Contents/MacOS -a 
"/Users/georgemolnar/Library/Application Support/WSJT-X" -t 
/var/folders/6j/2m5xrjn13s7c7k9fqv7vmp04gn/T/WSJT-X

At line 98 of file /Users/bill/src/wsjtx-svn/lib/decoder.f90 (unit = 19)
Fortran runtime error: Cannot open file 'fort.19': Permission denied

Error termination. Backtrace:
#0 0x10d134ab6
#1 0x10d135388
#2 0x10d1359ec
#3 0x10d1b5cca
#4 0x10d1aea5d
#5 0x1050f0f30
#6 0x1050cada2
#7 0x1050ca6a7
#8 0x10513fbae


*George J Molnar*
Washington, DC, USA
KF2T   - @GJMolnar


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] ERROR WRITING WAV FILE

[Black Michael via wsjt-devel]

It's whatever path you have in Settings/Audio -- the "Save Directory".If it 
doesn't exist just create it.
de Mike W9MDB
 

On Wednesday, May 2, 2018, 11:18:43 AM CDT, jtul...@roadrunner.com 
 wrote:  
 
 All: 
 
After I removed all of the wav files that I had unknowingly created, 
I apparently destroyed the path to the file. 
 
What must the name of the sav file in the Save Directory be? 
 
How do I create the file? 
 
Note: I have SAVE:NONE 
 
Thanks ! 
 
Jim W8CZN 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] ERROR WRITING WAV FILE

[jtullis]

All: 
 
After I removed all of the wav files that I had unknowingly created, 
I apparently destroyed the path to the file. 
 
What must the name of the sav file in the Save Directory be? 
 
How do I create the file? 
 
Note: I have SAVE:NONE 
 
Thanks ! 
 
Jim W8CZN 

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] v1.9.0-rc4, mode change problem

[Joe Taylor]

Hi Hideo-san,

On 4/27/2018 2:37 AM, JH3XCU wrote:

WSJT-X v1.9.0-rc4, mode change problem:

It will not be displayed correctly when WSPR - JT9etc mode changed.
Please see attached e-file

73, Hideo - JH3XCU


1. Use the mouse to grasp the right edge of the text window.  You can  
set its width as you wish.


2. Many users prefer to create and use entries on the Configurations  
menu for switching between modes.  Instructions can be found in Section  
10.1.3 in the WSJT-X User Guide:

http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-1.9.0-rc4.html#MENUS
Then, you can have the screen configured as you like it for each  
operating mode.


-- 73, Joe, K1JT

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] DXPedition test manual / FIN

[Saku]

Hi !

I have translated ( Google did, and I fixed it to understandable Finnish 
form ;)  ) latest DXPedition mode manual's part for hounds and FAQ.


Can be found from here:
https://drive.google.com/file/d/1dA6Ca8fkfdlK6M_XLPiYim7aEIx7ta66/view?usp=sharing

In case that someone (OH-stn) reading this list wants to share it at 
local club.


--
Saku
OH1KH

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel