[wsjt-devel] Version 2.0 issues with JT65

[Russ]

I'm having a lot of problems using JT65 for EME.  The right hand pane,
Average Decodes, seems to have a mind of it's own.  For instance, earlier I
was trying to work N5TM and I did copy two of his sequences.  Now, an hour
later I am just sitting here watching the screen and suddenly in the average
pane a new message from him pops up. It has the same text as the previous
decide but it has the current time and the dB, Dt, and frequency vary.  As I
watched for 15 minutes that same message popped up 8 times.  There are no
signals showing in the waterfall and I am positive that he is no longer
transmitting to me - also there is nothing showing in the right hand pane,
Singe Period Decodes.

That is one manifestation of the problem.  Another is somewhat similar.
About 3 days ago I decoded but did not work a station in France.  Since then
that same decode pops up randomly in the average window even though I am
currently working someone else.  Not only is he not transmitting to me, and
the moon is not up there, but it has been 3 days and WSJT-x has been shut
down and restarted several times and has been used on MSK144 extensively for
Geminids meteor activity.  Yet when I switch back to JT65 it still remembers
and displays that old decode !

Another thing that happens is that sometimes when I get a single period
decode of a station that I am working, it will immediately appear twice in
the average window.

I don't know if anyone else has seen that problem, but I cannot figure out
any way that it could be my setup.  Windows 10 Pro.

One more thing.  It is most disconcerting when in the middle of an EME
contact, to discover that you are no longer transmitting.  I think the time
out timer should be able to be disabled when in JT65.  Or removed - like in
older versions of WSJT.

While sitting here typing this message my average decodes pane has
completely filled with red messages from N5TM: 0028 -30 -3.2  201 #* K2TXB
N5TM EL29 ? d20

What's up?

Thanks, Russ K2TXB



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Worked before status?

[L Barley]

I'm having a problem with the "worked before status" not changing the color
of the station calling CQ after I complete a QSO.

I'm using v2.0 on Windows 10.

I've uninstalled all the versions that I had on the machine (1.8, 1.9.1,
2.0.rc5, and 2.0).  Then I re-installed v2.0, but when I opened it up all
the preferences in the settings were the same as before I "removed" v2.0...?

Anyway, I've rebooted, re-installed, and saved the preferences with the
worked before "box" checked and un-checked several times and I still can't
get the color to change after I complete a QSO.  I've re-scanned the ADIF
file several times too and no luck...

Any thoughts?  Am I just missing something?

TU 73
Lance
KD4FW
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] TX function lost, then have Task Manager problem

[Bill]

I have also reported this problem several times but have never received any
responses as to why this is happening. This is not windows specific since
it happens to me on both Mac and PC. It also isn't related to version
number since it happens with the older 1.9.1 and newer 2.0 versions. It
happens to me with a radio (FT991A) with a built in sound card and also a
radio (FT1000MP) using an external MicroHamUSB III interface. The only
thing that seems to apply is that it usually happens when I change my
transmit frequency slot. The transmitter keys but no audio. This is fixed
by immediately hitting halt tx then going back to enable. This isn't a very
common occurrence but it does happen to me at least several time a week, of
course especially when I am trying to work a new dx!

73

Bill - AK6A

On Fri, Dec 14, 2018 at 2:01 PM Morris Wideman via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

> I agree this phenomenon has been with me for a long time now, stopping TX
> and restarting resumes the audio. No one has provided a reason or fix. It
> does not seem to follow any particular pattern that I have been able to pin
> down.
> 73 Morris WA4MIT
>
> On Friday, December 14, 2018, 2:20:19 PM CST, Al Pawlowski <
> k6...@almont.com> wrote:
>
>
> The occasional “no audio” on Tx has been around since I started using
> WSJT-X a couple of years ago. Usually, just disabling Tx and reenabling
> fixes the problem until next time - it has been so seldom for me that I
> have just ignored it. I use an ANAN-100B with OpenSDRmrx now. However, I
> think this happened when I was using a USB Signal Link and Icom 745.
>
> Closing WSJT-X also recovers normal Tx. However, it does take some seconds
> for all of WSJT’s tasks to stop after the window closes. OpenSDRmrx also
> takes several seconds after its window closes to completely shutdown. Seems
> like a Windows thing. I am using Windows 10 Home now on a 2.4GHz I5, but it
> was the same on Windows 7pro and Windows 10pro on a 3.2GHz I3.
>
> Al Pawlowski, K6AVP
> Los Osos, CA USA
>
> Date: Fri, 14 Dec 2018 18:28:58 +
>
> From: David Fisher 
> To: WSJT software development 
> Subject: Re: [wsjt-devel] TX function lost, then have Task Manager
> problem
>
> I run a FLEX 6600 and I see it too.  This problem has been around for a
> while; it is not due to the WSJT protocol change. Since the transmitter
> engages we know that the transmit command is getting through the CAT system
> to the radio.  I?m not aware of any evidence of a problem like this
> occurring in other modes, SSB for instance.  That suggests that DAX is not
> getting the signal through to the radio.  It would be interesting to learn
> if RTTY and PSK users ever see an error like this.  I?ve never heard of one.
>
> If all of that is true (we?re guessing now) then the WSJT/DAX channel
> interface looks suspicious.  Like Al, I?ve seen the stuck WSJT and have had
> to kill them off by hand.  I haven?t noticed the CPU spinning, but I
> haven?t looked for it.
>
> Dave / NX6D
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] TX function lost, then have Task Manager problem

[Morris Wideman via wsjt-devel]

 I agree this phenomenon has been with me for a long time now, stopping TX and 
restarting resumes the audio. No one has provided a reason or fix. It does not 
seem to follow any particular pattern that I have been able to pin down.73 
Morris WA4MIT 
On Friday, December 14, 2018, 2:20:19 PM CST, Al Pawlowski 
 wrote:  
 
 The occasional “no audio” on Tx has been around since I started using WSJT-X a 
couple of years ago. Usually, just disabling Tx and reenabling fixes the 
problem until next time - it has been so seldom for me that I have just ignored 
it. I use an ANAN-100B with OpenSDRmrx now. However, I think this happened when 
I was using a USB Signal Link and Icom 745.
Closing WSJT-X also recovers normal Tx. However, it does take some seconds for 
all of WSJT’s tasks to stop after the window closes. OpenSDRmrx also takes 
several seconds after its window closes to completely shutdown. Seems like a 
Windows thing. I am using Windows 10 Home now on a 2.4GHz I5, but it was the 
same on Windows 7pro and Windows 10pro on a 3.2GHz I3.
Al Pawlowski, K6AVP
Los Osos, CA USA


Date: Fri, 14 Dec 2018 18:28:58 +

From: David Fisher 
To: WSJT software development 
Subject: Re: [wsjt-devel] TX function lost, then have Task Manager
 problem

I run a FLEX 6600 and I see it too.  This problem has been around for a while; 
it is not due to the WSJT protocol change. Since the transmitter engages we 
know that the transmit command is getting through the CAT system to the radio.  
I?m not aware of any evidence of a problem like this occurring in other modes, 
SSB for instance.  That suggests that DAX is not getting the signal through to 
the radio.  It would be interesting to learn if RTTY and PSK users ever see an 
error like this.  I?ve never heard of one.

If all of that is true (we?re guessing now) then the WSJT/DAX channel interface 
looks suspicious.  Like Al, I?ve seen the stuck WSJT and have had to kill them 
off by hand.  I haven?t noticed the CPU spinning, but I haven?t looked for it.

Dave / NX6D

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] TX function lost, then have Task Manager problem

[Al Pawlowski]

The occasional “no audio” on Tx has been around since I started using WSJT-X a 
couple of years ago. Usually, just disabling Tx and reenabling fixes the 
problem until next time - it has been so seldom for me that I have just ignored 
it. I use an ANAN-100B with OpenSDRmrx now. However, I think this happened when 
I was using a USB Signal Link and Icom 745.

Closing WSJT-X also recovers normal Tx. However, it does take some seconds for 
all of WSJT’s tasks to stop after the window closes. OpenSDRmrx also takes 
several seconds after its window closes to completely shutdown. Seems like a 
Windows thing. I am using Windows 10 Home now on a 2.4GHz I5, but it was the 
same on Windows 7pro and Windows 10pro on a 3.2GHz I3.

Al Pawlowski, K6AVP
Los Osos, CA USA

> Date: Fri, 14 Dec 2018 18:28:58 +

> From: David Fisher mailto:dsfis...@outlook.com>>
> To: WSJT software development  >
> Subject: Re: [wsjt-devel] TX function lost, then have Task Manager
>   problem
> 
> I run a FLEX 6600 and I see it too.  This problem has been around for a 
> while; it is not due to the WSJT protocol change. Since the transmitter 
> engages we know that the transmit command is getting through the CAT system 
> to the radio.  I?m not aware of any evidence of a problem like this occurring 
> in other modes, SSB for instance.  That suggests that DAX is not getting the 
> signal through to the radio.  It would be interesting to learn if RTTY and 
> PSK users ever see an error like this.  I?ve never heard of one.
> 
> If all of that is true (we?re guessing now) then the WSJT/DAX channel 
> interface looks suspicious.  Like Al, I?ve seen the stuck WSJT and have had 
> to kill them off by hand.  I haven?t noticed the CPU spinning, but I haven?t 
> looked for it.
> 
> Dave / NX6D

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] LOG QSO Power

[Alessandro Gorobey via wsjt-devel]

Hi All,

I have seen in last period several messages, also in other forums on 
this argument.


It refer to a ADIF (http://www.adif.org) field defined as numeric.

"TX_PWR Number 	 the logging station's power in Watts with a value 
greater than 0"


"Number N a sequence of one or more Digits representing a decimal 
number, optionally preceded by a minus sign (ASCII code 45) and 
optionally including a single decimal point  (ASCII  code 46) "


WSJT-X accept also unwanted characters.

It is possible (YES) filter the input ?

For example:

20W ---> is invalid
20 > is numeric and valid
2,5 > is numeric but comma separator is not accepted by ADIF
2.5 > OK this ADIF like
500 mw ---> is invalid
0.5W ---> is invalid
0.5 ---> OK this is accepted

Thanks in advance

--
73
Sandro
IW3RAB


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] TX function lost, then have Task Manager problem

[David Fisher]

I run a FLEX 6600 and I see it too.  This problem has been around for a while; 
it is not due to the WSJT protocol change.  Since the transmitter engages we 
know that the transmit command is getting through the CAT system to the radio.  
I’m not aware of any evidence of a problem like this occurring in other modes, 
SSB for instance.  That suggests that DAX is not getting the signal through to 
the radio.  It would be interesting to learn if RTTY and PSK users ever see an 
error like this.  I’ve never heard of one.

If all of that is true (we’re guessing now) then the WSJT/DAX channel interface 
looks suspicious.  Like Al, I’ve seen the stuck WSJT and have had to kill them 
off by hand.  I haven’t noticed the CPU spinning, but I haven’t looked for it.

Dave / NX6D



From: Al 
Sent: Thursday, December 13, 2018 7:27:45 AM
To: bergeracb--- via wsjt-devel
Subject: Re: [wsjt-devel] TX function lost, then have Task Manager problem

I also have seen the problem and have come to believe that it related the CAT..
If I use a traditional CAT ( comport) with Kenwood TS480, I do not have this 
problem. If is use the Flex interface for CAT  this problem returns..
You should also note that the CPU usage for the WSJT task is about 10 times 
normal, which might indicate some kind of looping fault in the program.

AL, K0VM

On 12/12/2018 2:53 PM, bergeracb--- via wsjt-devel wrote:
Have not seen my problem listed yet, so I will try to explain what I see.
Every once in a while operating, the TX function stops working. The
Transmitter goes into transmit but there is no audio drive so no RF is
produced. WSJT-X thinks it is working. If I shut down WSJT-X and try
to restart the program I get the message that their is another instance
of WSJT-X running and the program won't start. Checking the task
manager under the Running APPS shows no WSJT-X app listed.
However if I look in the Running BACKGROUND tasks, WSJT-X
has been moved from the APPS to the BACKGROUND tasks.
using END TASK there and then I can restart the program and use
the transmitter again. Can't decide if it is a WSJT-X problem or a
FLEX 6700 and DAX problem. but I have tried shutting  down and
restarting DAX several times without any success. Of course shutting
down and restarting the 6700 (after the background WSJT-X task is
closed)  also fixes the problem.  I'm wondering if any of the other
Flex owner see this problem? I have the work around so right now
it is just a nuisance.
73 Al Berger N4AB






___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Transition to FT8 and MSK144 v2.0

[VE3FBZ]

Good show.
Made 24 contacts in about 40 minutes this morning on 40M
My screen was blue with  new call CQs.
Mostly eastern seaboard US.
One QSO with Japan.
Upgrade club PC , www.larc.ca, this morning.



 Regards and 73s
VE3FBZ
London Amateur Radio Club
www.larc.ca 




> On Dec 14, 2018, at 12:14 PM, Joe Taylor  wrote:
> 
> Many thanks to all those who are helping to further the transition to new 
> protocols for FT8 and MSK144!
> 
> This morning I ran an instance of WSJT-X v1.9.1 in parallel with WSJT-X 2.0.  
> An informal count of decodes in the old and new protocols shows far more 
> activity using the new 77-bit messages.  Here are the rough statistics, given 
> as the ratio of new- to old-style decodes:
> 
> For FT8:
> ---
> 17m:  10:1
> 20m:   3:1
> 30m:   6:1
> 40m   20:1
> 
> MSK144
> --
> Lots of activity on both 6 and 2m, all using v2.0
> 
> Clearly upgrading process is going well.
> 
>-- 73, Joe, K1JT
> 
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Transition to FT8 and MSK144 v2.0

[Charles Otnott via wsjt-devel]

Joe Taylor wrote:
-Original Message-
>From: Joe Taylor 
>Sent: Dec 14, 2018 11:14 AM
>To: wsjt-devel@lists.sourceforge.net
>Subject: [wsjt-devel] Transition to FT8 and MSK144 v2.0
>
>Many thanks to all those who are helping to further the transition to 
>new protocols for FT8 and MSK144!
>
>This morning I ran an instance of WSJT-X v1.9.1 in parallel with WSJT-X 
>2.0.  An informal count of decodes in the old and new protocols shows 
>far more activity using the new 77-bit messages.  Here are the rough 
>statistics, given as the ratio of new- to old-style decodes:
>
>For FT8:
>---
>17m:  10:1
>20m:   3:1
>30m:   6:1
>40m   20:1
>
>MSK144
>--
>Lots of activity on both 6 and 2m, all using v2.0
>
>Clearly upgrading process is going well.
>
>   -- 73, Joe, K1JT
Dr. Taylor,

I mostly operate on the 6 meter band using FT-8.
Of the many operators on the band last night, I
decoded only two users of the old protocol.
Your, and the developers' efforts are paying off
quite well. Thank you for a great way for even a
newbie to get into the hobby with minimal equipment.

73,
Charlie
WD5BJT  EM50


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Transition to FT8 and MSK144 v2.0

[Joe Taylor]

Many thanks to all those who are helping to further the transition to 
new protocols for FT8 and MSK144!


This morning I ran an instance of WSJT-X v1.9.1 in parallel with WSJT-X 
2.0.  An informal count of decodes in the old and new protocols shows 
far more activity using the new 77-bit messages.  Here are the rough 
statistics, given as the ratio of new- to old-style decodes:


For FT8:
---
17m:  10:1
20m:   3:1
30m:   6:1
40m   20:1

MSK144
--
Lots of activity on both 6 and 2m, all using v2.0

Clearly upgrading process is going well.

-- 73, Joe, K1JT


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Minor issue Band Activity spacing.

[Bill Somerville]

On 14/12/2018 16:49, David Gould wrote:


Concerns the band activity window when in a CQ msg the country name is 
preceded by eg   a1


In 1.9 the (eg a1  Belize) starts several space characters to the 
right of where a normal country name starts.   Is there a reason for this?


In V2 there are many more leading spaces meaning most of the country 
name is out of the window unless you have a very wide window.  Is this 
deliberate, if so why?


73,  Dave G3UEG


Hi Dave,

this offset is not easy to remove without removing the AP decoding 
information. We are contemplating removing the AP information and the 
DXCC entity name will then appear in line with other CQ/QRZ messages. 
There is an extra shift in v2.0.0 due to the maximum message having 
increased from 22 to 37 characters.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Multi WSJT programs at once

[Black Michael via wsjt-devel]

What do you mean "cat command to both instances"?  I guess you mean both 
instances controlling the rig?  If you're doing different bands that makes no 
sense.On the other hand if you use FLRig you can have multiple instances of 
WSJT-X all talking to the rig.
de Mike W9MDB


 

On Friday, December 14, 2018, 10:55:56 AM CST, k...@comcast.net 
 wrote:  
 
 Yes, you need to start WSJT from a cmd prompt and use the --rig-name argument, 
like this:

wsjtx.exe --rig-name band1
wsjtx.exe --rig-name band2

This will create 2 instances of the program. In my case band1 uses the left 
audio channel, and band2 uses the right audio channel, corresponding to the 
main and sub VFOs on my IC7610.

I have not yet figured out how to get the CAT commands to work with both 
instances.

Good luck,
Al, K7AR


Sent from Xfinity Connect Application


-Original Message-

From: ki1p.k1...@gmail.com
To: wsjt-devel@lists.sourceforge.net
Sent: 2018-12-14 8:46:46 AM 
Subject: [wsjt-devel] Multi WSJT programs at once

I am new to this list.  Hope it is ok to ask this here.  Is there a way to run 
more than one session of WSJT at one time on the same PC?  I would like to run 
more than one radio (Band) at the same time, each one on a different sound 
card.  Is this possible? ChrisKI1P

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Multi WSJT programs at once

[Bill Somerville]

On 14/12/2018 16:42, Chris Knox wrote:
I am new to this list.  Hope it is ok to ask this here.  Is there a 
way to run more than one session of WSJT at one time on the same PC?  
I would like to run more than one radio (Band) at the same time, each 
one on a different sound card.  Is this possible?

Chris
KI1P


Hi Chris,

do you mean WSJT or WSJT-X? Those are two different applications.

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Multi WSJT programs at once

[Black Michael via wsjt-devel]

Yes...I guess you have multiple rigs or a Flex?

You can copy the shortcut for WSJT-X on your desktop and modify the target like 
this:
C:\WSJT\wsjtx\bin\wsjtx.exe -r rig2
You can call it "rig2" or whatever you'd like (no spaces please).
You will have two separate instances of WSJT-X with two config files and two 
logs.
de Mike W9MDB


 

On Friday, December 14, 2018, 10:45:11 AM CST, Chris Knox 
 wrote:  
 
 I am new to this list.  Hope it is ok to ask this here.  Is there a way to run 
more than one session of WSJT at one time on the same PC?  I would like to run 
more than one radio (Band) at the same time, each one on a different sound 
card.  Is this possible? 
ChrisKI1P___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Multi WSJT programs at once

[Chris Knox]

I am new to this list.  Hope it is ok to ask this here.  Is there a way to
run more than one session of WSJT at one time on the same PC?  I would like
to run more than one radio (Band) at the same time, each one on a different
sound card.  Is this possible?
Chris
KI1P
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] WSJT-X 2.0 Issue

[William Carpenter]

William Carpenter 
Wed, Dec 12, 7:20 AM (2 days ago)
to wsjtgroup
I have not had this issue with any previous version including the 2.0-rcx
versions.  If I select the "Retain" boxes on "Txpower" and "Comments" in
the logging window it does not retain what I enter but rather always
retains the very first parameters I entered the first time I ran the
production 2.0 after I installed it.  Either this is a bug or there is
something new in the production 2.0 that I need to change tho I have not
found that after looking for quite some time.  The upshot is that I have to
enter that info every time I log a contact.

I use Linux Mint 19 amd64 and CQRlog for my logging program in  remote mode
for wsjtx.

73, Bill NZ0T
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] MSK144 2.0 no decode

[Pino Zollo]

Sorry

I have just known that ZP9CTS was using MSHV 2.05 :-(

it seems that they did upgrade FT8 but not MSK144


73

Pino ZP4KFX



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] MSK144 2.0 no decode

[Pino Zollo]

This morning I, ZP4KFX and Milton ZP9CTS, have tried MSK144 on 2m band.

There was tropo...signals S5 

I using V2.0 on Linux and Milton V2.0 on Windoz

No decode at all ! :-(

We changed to FT8 and all was OK

At the link:

https://cloud5.tcpsas.com/index.php/s/fijk6j0tZ2IULkh

you can find the .wav files of the MSK144 as seen on my side


73

Pino ZP4KFX





___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel