Re: [wsjt-devel] Change request

[George Molnar via wsjt-devel]

Perhaps tuning your VFO 200 Hz lower will do the trick? I have adjusted the 
frequency tables down 500 Hz and use a 5 kHz filter, and everyone is in the 
passband without difficulty.

George J Molnar
College Park, Maryland
KF2TFM19ma


> On Jun 22, 2022, at 8:42 PM, Notko Mermerski via wsjt-devel 
>  wrote:
> 
> 
> Andy,
> I have start frequency of Wide Graph at 100Hz, even tried  with start at 0Hz 
> Rx freq. never goes below 200. Same for Tx freq.
> Same thing if I enter numeric values in corresponding boxes. Should mention 
> that I am running FT8/4.
>  
> 73 Notko/SA5NTK
>  
> From: Andrew Neumeier via wsjt-devel 
> [mailto:wsjt-devel@lists.sourceforge.net] 
> Sent: den 22 juni 2022 21:56
> To: Notko Mermerski via wsjt-devel 
> Cc: Andrew Neumeier 
> Subject: Re: [wsjt-devel] Change request
>  
> Notko,
>  
> Can you not just change the start frequency in the Wide Graph?  Mine is set 
> at 100hz. 
>  
>  
> 73,
> Andy, ka2uqw
>  
>  
>  
> On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via 
> wsjt-devel  wrote:
>  
>  
> Hi everybody,
> 
>  
> 
> I am running WSJT-X 2.5.4.
> 
>  
> 
> Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red 
> bracket) below 200Hz. I can understand that there is a rationale for this 
> limit, but modern TRXes are capable of receiving below 200Hz. I am seeing 
> decoded messages below 200Hz and I would like to be able to monitor them in 
> the Rx pane of WSTJ-X main window.
> 
> I am aware that there is a workaround to achieve this, but still, it is a 
> workaround.
> 
>  
> 
> Would it be possible to lower this limit to at least 100 Hz?
> 
>  
> 
> 73 Notko/SA5NTK
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Change request

[Notko Mermerski via wsjt-devel]

Andy,

I have start frequency of Wide Graph at 100Hz, even tried  with start at 0Hz Rx 
freq. never goes below 200. Same for Tx freq.

Same thing if I enter numeric values in corresponding boxes. Should mention 
that I am running FT8/4.

 

73 Notko/SA5NTK

 

From: Andrew Neumeier via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] 
Sent: den 22 juni 2022 21:56
To: Notko Mermerski via wsjt-devel 
Cc: Andrew Neumeier 
Subject: Re: [wsjt-devel] Change request

 

Notko,

 

Can you not just change the start frequency in the Wide Graph?  Mine is set at 
100hz.  

 

 

73,

Andy, ka2uqw

 

 

 

On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via wsjt-devel 
mailto:wsjt-devel@lists.sourceforge.net> > 
wrote: 

 

 

Hi everybody,

 

I am running WSJT-X 2.5.4.

 

Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red 
bracket) below 200Hz. I can understand that there is a rationale for this 
limit, but modern TRXes are capable of receiving below 200Hz. I am seeing 
decoded messages below 200Hz and I would like to be able to monitor them in the 
Rx pane of WSTJ-X main window.

I am aware that there is a workaround to achieve this, but still, it is a 
workaround.

 

Would it be possible to lower this limit to at least 100 Hz? 

 

73 Notko/SA5NTK

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net  
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] RC1 quits

[Donhawbaker via wsjt-devel]

 
 

 At first RC1 worked fine.But now it boots up, shows the splash beta 
screen, then the TS-2000 beeps, and when I hit Okay, the program quits.I 
have no access to the setup screen.
 

 
I reloaded the program twice.Same result.2.5.4 runs fine.
 
 
 
 
 
 
 

 
 ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Hamlib rigcontrol and PTT

[Black Michael via wsjt-devel]

The 706MKIIG does not do CAT PTT per se but the ptt-type=RTS should work.
Why do you have rst_state=ON?  That conflicts with ptt-type=RTS and might be 
why it's not working.
And dtr_state=ON would only be needed if your CAT cable needs power from the 
computer to work.
Mike W9MDB

 

On Wednesday, June 22, 2022 at 11:35:27 AM CDT, Hrafnkell Eiriksson via 
wsjt-devel  wrote:  
 
 Hi
I'm running WSJT-X v2.5.4 on a Win10 computer.I've set up hamlib rigctld 
(version 4.4) on a Raspberry Pi and connected it to my Icom706mk2g.I'm using 
two com ports from the RPi, one for CAT control and one for PTT.I've set  
WSJT-X  to use hamlib for rig control and pointed it to the ip:port of my RPi.
Test CAT works fine and  WSJT-X can set and read the frequency if I have PTT 
method set to Vox.If I set PTT method to CAT then Test CAT fails with the 
error:Rig failureHamlib error: IO errornetwork.c(441):network_close 
return(0)iofunc.c(361):port_close return(0)rig.c(1047):rig_open return(-6) IO 
errornetwork.c(441):network_close return(0)iofunc.c(361):port_close 
return(0)iofunc.c(361):port_close return(0) while opening connection to rig

I can use the hamlib CAT PTT from other software such as Log4OM without 
issues.I would expect CAT PTT with hamlib rigcontrol in WSJT-X to behave the 
same, that is use hamlib calls to do PTT.
My rigctld command line isrigctld --model=3011 --rig-file=/dev/ttyUSB0 
--serial-speed=4800 --port=4532 
--set-conf=stop_bits=1,dtr_state=ON,rts_state=ON --ptt-file=/dev/ttyUSB1  
--ptt-type=RTS -Z
Am I setting something wrong or misunderstanding something?
Thanks  Hrafnkell TF3HR___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Change request

[Andrew Neumeier via wsjt-devel]

 Notko,
Can you not just change the start frequency in the Wide Graph?  Mine is set at 
100hz.  


73,Andy, ka2uqw


On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via 
wsjt-devel  wrote:  
 
 
Hi everybody,

  

I am running WSJT-X 2.5.4.

  

Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red 
bracket) below 200Hz. I can understand that there is a rationale for this 
limit, but modern TRXes are capable of receiving below 200Hz. I am seeing 
decoded messages below 200Hz and I would like to be able to monitor them in the 
Rx pane of WSTJ-X main window.

I am aware that there is a workaround to achieve this, but still, it is a 
workaround.

  

Would it be possible to lower this limit to at least 100 Hz? 

  

73 Notko/SA5NTK
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Change request

[Notko Mermerski via wsjt-devel]

Hi everybody,

 

I am running WSJT-X 2.5.4.

 

Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red 
bracket) below 200Hz. I can understand that there is a rationale for this 
limit, but modern TRXes are capable of receiving below 200Hz. I am seeing 
decoded messages below 200Hz and I would like to be able to monitor them in the 
Rx pane of WSTJ-X main window.

I am aware that there is a workaround to achieve this, but still, it is a 
workaround.

 

Would it be possible to lower this limit to at least 100 Hz? 

 

73 Notko/SA5NTK

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Hamlib rigcontrol and PTT

[Hrafnkell Eiriksson via wsjt-devel]

Hi

I'm running WSJT-X v2.5.4 on a Win10 computer.
I've set up hamlib rigctld (version 4.4) on a Raspberry Pi and connected it
to my Icom706mk2g.
I'm using two com ports from the RPi, one for CAT control and one for PTT.
I've set  WSJT-X  to use hamlib for rig control and pointed it to the
ip:port of my RPi.

Test CAT works fine and  WSJT-X can set and read the frequency if I have
PTT method set to Vox.
If I set PTT method to CAT then Test CAT fails with the error:
Rig failure
Hamlib error: IO error
network.c(441):network_close return(0)
iofunc.c(361):port_close return(0)
rig.c(1047):rig_open return(-6) IO error
network.c(441):network_close return(0)
iofunc.c(361):port_close return(0)
iofunc.c(361):port_close return(0) while opening connection to rig

I can use the hamlib CAT PTT from other software such as Log4OM without
issues.
I would expect CAT PTT with hamlib rigcontrol in WSJT-X to behave the same,
that is use hamlib calls to do PTT.

My rigctld command line is
rigctld --model=3011 --rig-file=/dev/ttyUSB0 --serial-speed=4800
--port=4532 --set-conf=stop_bits=1,dtr_state=ON,rts_state=ON
--ptt-file=/dev/ttyUSB1  --ptt-type=RTS -Z

Am I setting something wrong or misunderstanding something?

Thanks
  Hrafnkell TF3HR
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc1 Waterfall Issue

[Gary Rogers via wsjt-devel]

So I had the N Avg set to 2 which gave the intermittent displays. Reducing to N 
avg to 1 solved the problem. Any N Avg setting above 3 eliminates the time hack 
and band label. Guess I’ll leave it at 1…Thanks for your help!

Gary KO3F

> You've got barely enough room to show it -- the height of the intervals may 
> be 1 pixel off or so and make the difference.
> 
> If you decrease your "N Avg" by 1 they should all show up.
> 
> I take it you increased your font size?
> 
> Mike W9MDB
> 
> 
> 
> 
> On Tuesday, June 21, 2022, 11:10:52 PM CDT, Gary Rogers via wsjt-devel 
>  wrote:
> 
> 
> Using RC1 on Windows 10. Noticed tonight that the time hacks and band 
> notations are intermittently missing from the waterfall:
> 
> 
> 
> It seems random and I cannot point to a possible cause.
> 
> Gary KO3F
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net 
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel 
> 
>  PM.png>___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc1 Waterfall Issue

[Gary Rogers via wsjt-devel]

Mike, I have not increased font size from default… Will try N avg change later 
and advise…Thanks

> On Jun 22, 2022, at 5:36 AM, Black Michael via wsjt-devel 
>  wrote:
> 
> You've got barely enough room to show it -- the height of the intervals may 
> be 1 pixel off or so and make the difference.
> 
> If you decrease your "N Avg" by 1 they should all show up.
> 
> I take it you increased your font size?
> 
> Mike W9MDB
> 
> 
> 
> 
> On Tuesday, June 21, 2022, 11:10:52 PM CDT, Gary Rogers via wsjt-devel 
>  wrote:
> 
> 
> Using RC1 on Windows 10. Noticed tonight that the time hacks and band 
> notations are intermittently missing from the waterfall:
> 
> 
> 
> It seems random and I cannot point to a possible cause.
> 
> Gary KO3F
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net 
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel 
> 
>  PM.png>___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel