Re: [wsjt-devel] PSK Reporter ANTENNA

[signalhz signalhz]

I think it’s available in most programs that report to the psk reporter. Fill 
in your info about your antenna system

 73 Eddy N7AED

Sent from my iPhone

On Jan 25, 2018, at 1:13 AM, Libor Holouš 
> wrote:

Hello Dennis.

This is available in WSJT-X. Hope the picture helps you..

73 Libor
- Original Message -
From: Dennis Drakopoulos via wsjt-devel
To: wsjt-devel@lists.sourceforge.net
Cc: Dennis Drakopoulos
Sent: Thursday, January 25, 2018 9:03 AM
Subject: [wsjt-devel] PSK Reporter ANTENNA


Hello from Athens!
I believe it would be beneficial for all if WSJT software development team 
could add as a feature, to allow the user to provision antenna information 
field on the spots being uploaded to PSK REPORTER project.


73 de SV1CDN, Dennis!



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT 1.8.0 RC3

[signalhz signalhz]

I liked the lock tx too

73 Eddy N7AED

Sent from my iPhone

On Oct 17, 2017, at 12:21 PM, Chris Getman 
> wrote:

I just downloaded Version 1.8.0 RC3 and found it missing the Lock Rx-Tx feature.
In using FT8 from the beginning, I have only twice found a station wanting to 
work splits.
So I really miss this feature.
Any chance of putting it back?

Chris  -  N3PLM
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Need help building

[signalhz signalhz]

I went through the steps but when I got to JTSDK-QT I can't get it to build 
wsjtx 1.7.1 with the new mode. Also I don't see the other programs after 
building them ie WSJT and WSJT10. I see their folders but there's no icon to 
click on for either of them to run the programs. What have I done wrong?  Be 
easy on me I am very in experienced building /first time


73 Eddy N4ABN
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FT8: Potential new mode for fast QSOs

[signalhz signalhz]

Is this a linux version or mac?

Get Outlook for iOS

From: David Tiller 
Sent: Thursday, June 29, 2017 5:02:35 PM
To: WSJT software development
Subject: Re: [wsjt-devel] FT8: Potential new mode for fast QSOs

Gary,

Ask and ye shall receive! I uploaded an unofficial OSX build of 7752 to my 
google drive here: https://drive.google.com/open?id=0B4DphHV_ItCZbjZDdmt2NnR2cHc

Enjoy & 73 de K4DET
On Jun 29, 2017, at 7:43 PM, C. Gary Rogers  wrote:

> Would love you give it a try if there is a OS X version somewhere…Gary KO3F
>
>> On Jun 29, 2017, at 7:28 PM, Laurie, VK3AMA <_vk3a...@vkdxer.net> wrote:
>>
>>
>>
>> On 30/06/2017 9:10 AM, Joe Taylor wrote:
>>> Is anyone using "T10"? When I've checked recently, usage seemed to be close 
>>> to zero.
>>>
>>> In any eveny, we had no idea that "~" was being used to flag a T10 decode.  
>>> (Or, for that metter, that you were using those flags in JTAlert.)
>>>
>>> Maybe you can tell it's FT8 because I (mistakenly) left two spaces between 
>>> "~" and the start of message, rather than one. :-)
>>>
>>>   -- Joe, K1JT
>>
>> Joe,
>>
>> The 2 spaces hack is not really suitable, since JTAlert uses the mode field 
>> passed in the UDP decode packet. I'd rather not code a fix based on a source 
>> code error that will likely be corrected in the future.
>>
>> A JTAlert fix is rather trivial, as I already know if the UDP packet is 
>> coming from WSJT-X or JTDX, so its a simple application test to determine 
>> the true mode.
>>
>> I'll be posting a new JTAlert later today with the fix.
>>
>> Regarding T10 usage, there is only a small number of users, primarily EU 
>> based. I have not seen any significant uptake of the mode, there appears to 
>> be only a small number of regular spotters of the mode.
>>
>> de Laurie VK3AMA
>>
>>
>> --
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
David Tiller
Sr. Architect/Lead Consultant | CapTech
(804) 304-0638 | dtil...@captechconsulting.com




--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost

[signalhz signalhz]

Ok 1.1 came with initial install.

Found 1.7 & installed

Thanks for those links Mike. That helped

I got 1.7 TX & RX with power out now. It was a setting in the Rig.

Now I'm having trouble with power out in FlDigi because I changed a setting in 
the rig.

I bet when I go back to windows Ill have to change the rig.

Writing settings down for Linux

73 Thanks Mike

N4ABN Eddy

Get Outlook for iOS<https://aka.ms/o0ukef>


From: Michael Black <mdblac...@gmail.com>
Sent: Tuesday, February 28, 2017 9:05:52 PM
To: WSJT software development
Subject: Re: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost

1.1?   That would be a really old version.  The 7300 wasn't in that version.
Can't you compile a more recent version?

de Mike W9MDB

On Tue, Feb 28, 2017 at 9:15 PM, signalhz signalhz 
<signa...@outlook.com<mailto:signa...@outlook.com>> wrote:
I have similar problems

I cant get WSJT-X v 1.1, r3496 to work using rig control while on Linux Mint 
18.1 64 bit 'Serena' & cant get any audio to the programs from the USB Codec. I 
get "Failed to start audio input stream. "  & "PortAudio says requested sound 
card format not supported. I am using Timewave Navigator. I don't see Icom 7300 
in the drop down list for rig control. I am not real familiar with Linux Mint 
yet.

I have FlDigi working fine on Linux

Now on Windows some reason WSJT-X loses audio to TX some times but not often. I 
have to close the program & re-open it to get audio back.

Help would be appreciated.

73 Eddy N4ABN

Get Outlook for iOS<https://aka.ms/o0ukef>

_
From: Pino Zollo <pinozo...@gmail.com<mailto:pinozo...@gmail.com>>
Sent: Tuesday, February 28, 2017 4:01 PM
Subject: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost
To: <wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>>


Hi Bill,

El 28/02/17 a las 15:45, 
wsjt-devel-requ...@lists.sourceforge.net<mailto:wsjt-devel-requ...@lists.sourceforge.net>
 escribió:
> what version of WSJT-X are you using?

1.7.0 last version distributed via PPA on Mint 17.3

>
> The WSJT-X "Settings->Radio->Mode" options determine if WSJT-X controls
> the mode of your rig and whether USB or USB-DATA mode is used.
>
Found the solution into the WSJT-X configurationnow it is stable in
USB-D.

> With Icom rigs you must disable "CI-V Transceive Mode" in the rig's
> menu, this option which is on by default causes unsolicited CAT traffic
> that can give unexpected and undesirable behaviour.
>
TU done...

> You should also do a basic RFI check by doing a test transmission into a
> dummy load or at least on minimum power on the rig. There have been a
> few reports of what appears to be RFI issues with the USB interface on
> the IC-7300.

The problem is present also in RX only, without TXing.

...after few minutes of operation the PC loses the control of the radio
and opens a window to ask for retry or leave.

...also the audio gets lost and I have to restart WSJT-x to get the
control again.

>
> 73
> Bill
> G4WJS.

Best 73

Pino ZP4KFX

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org<http://SlashDot.org>! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost

[signalhz signalhz]

Update

I found WSJT-X v1.7 & installed on Linux Mint. I got it to work but sound 
output is very low. I cant get enough audio to give power out on TX.

I cant find any where to turn up the audio on Linux Mint. I adjusted audio 
settings on the rig but still not enough to get the watt meter level to show 
power out on the rig or external watt meter.

73 Eddy N4ABN

Get Outlook for iOS<https://aka.ms/o0ukef>

____
From: signalhz signalhz <signa...@outlook.com>
Sent: Tuesday, February 28, 2017 8:15:38 PM
To: WSJT software development
Subject: Re: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost

I have similar problems

I cant get WSJT-X v 1.1, r3496 to work using rig control while on Linux Mint 
18.1 64 bit 'Serena' & cant get any audio to the programs from the USB Codec. I 
get "Failed to start audio input stream. "  & "PortAudio says requested sound 
card format not supported. I am using Timewave Navigator. I don't see Icom 7300 
in the drop down list for rig control. I am not real familiar with Linux Mint 
yet.

I have FlDigi working fine on Linux

Now on Windows some reason WSJT-X loses audio to TX some times but not often. I 
have to close the program & re-open it to get audio back.

Help would be appreciated.

73 Eddy N4ABN

Get Outlook for iOS<https://aka.ms/o0ukef>

_
From: Pino Zollo <pinozo...@gmail.com<mailto:pinozo...@gmail.com>>
Sent: Tuesday, February 28, 2017 4:01 PM
Subject: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost
To: <wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>>


Hi Bill,

El 28/02/17 a las 15:45, 
wsjt-devel-requ...@lists.sourceforge.net<mailto:wsjt-devel-requ...@lists.sourceforge.net>
 escribió:
> what version of WSJT-X are you using?

1.7.0 last version distributed via PPA on Mint 17.3

>
> The WSJT-X "Settings->Radio->Mode" options determine if WSJT-X controls
> the mode of your rig and whether USB or USB-DATA mode is used.
>
Found the solution into the WSJT-X configurationnow it is stable in
USB-D.

> With Icom rigs you must disable "CI-V Transceive Mode" in the rig's
> menu, this option which is on by default causes unsolicited CAT traffic
> that can give unexpected and undesirable behaviour.
>
TU done...

> You should also do a basic RFI check by doing a test transmission into a
> dummy load or at least on minimum power on the rig. There have been a
> few reports of what appears to be RFI issues with the USB interface on
> the IC-7300.

The problem is present also in RX only, without TXing.

...after few minutes of operation the PC loses the control of the radio
and opens a window to ask for retry or leave.

...also the audio gets lost and I have to restart WSJT-x to get the
control again.

>
> 73
> Bill
> G4WJS.

Best 73

Pino ZP4KFX

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org<http://SlashDot.org>! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost

[signalhz signalhz]

I have similar problems

I cant get WSJT-X v 1.1, r3496 to work using rig control while on Linux Mint 
18.1 64 bit 'Serena' & cant get any audio to the programs from the USB Codec. I 
get "Failed to start audio input stream. "  & "PortAudio says requested sound 
card format not supported. I am using Timewave Navigator. I don't see Icom 7300 
in the drop down list for rig control. I am not real familiar with Linux Mint 
yet.

I have FlDigi working fine on Linux

Now on Windows some reason WSJT-X loses audio to TX some times but not often. I 
have to close the program & re-open it to get audio back.

Help would be appreciated.

73 Eddy N4ABN

Get Outlook for iOS

_
From: Pino Zollo >
Sent: Tuesday, February 28, 2017 4:01 PM
Subject: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost
To: >


Hi Bill,

El 28/02/17 a las 15:45, 
wsjt-devel-requ...@lists.sourceforge.net
 escribió:
> what version of WSJT-X are you using?

1.7.0 last version distributed via PPA on Mint 17.3

>
> The WSJT-X "Settings->Radio->Mode" options determine if WSJT-X controls
> the mode of your rig and whether USB or USB-DATA mode is used.
>
Found the solution into the WSJT-X configurationnow it is stable in
USB-D.

> With Icom rigs you must disable "CI-V Transceive Mode" in the rig's
> menu, this option which is on by default causes unsolicited CAT traffic
> that can give unexpected and undesirable behaviour.
>
TU done...

> You should also do a basic RFI check by doing a test transmission into a
> dummy load or at least on minimum power on the rig. There have been a
> few reports of what appears to be RFI issues with the USB interface on
> the IC-7300.

The problem is present also in RX only, without TXing.

...after few minutes of operation the PC loses the control of the radio
and opens a window to ask for retry or leave.

...also the audio gets lost and I have to restart WSJT-x to get the
control again.

>
> 73
> Bill
> G4WJS.

Best 73

Pino ZP4KFX

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel