Re: [wsjt-devel] Change request
Perhaps tuning your VFO 200 Hz lower will do the trick? I have adjusted the frequency tables down 500 Hz and use a 5 kHz filter, and everyone is in the passband without difficulty. George J Molnar College Park, Maryland KF2TFM19ma > On Jun 22, 2022, at 8:42 PM, Notko Mermerski via wsjt-devel > wrote: > > > Andy, > I have start frequency of Wide Graph at 100Hz, even tried with start at 0Hz > Rx freq. never goes below 200. Same for Tx freq. > Same thing if I enter numeric values in corresponding boxes. Should mention > that I am running FT8/4. > > 73 Notko/SA5NTK > > From: Andrew Neumeier via wsjt-devel > [mailto:wsjt-devel@lists.sourceforge.net] > Sent: den 22 juni 2022 21:56 > To: Notko Mermerski via wsjt-devel > Cc: Andrew Neumeier > Subject: Re: [wsjt-devel] Change request > > Notko, > > Can you not just change the start frequency in the Wide Graph? Mine is set > at 100hz. > > > 73, > Andy, ka2uqw > > > > On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via > wsjt-devel wrote: > > > Hi everybody, > > > > I am running WSJT-X 2.5.4. > > > > Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red > bracket) below 200Hz. I can understand that there is a rationale for this > limit, but modern TRXes are capable of receiving below 200Hz. I am seeing > decoded messages below 200Hz and I would like to be able to monitor them in > the Rx pane of WSTJ-X main window. > > I am aware that there is a workaround to achieve this, but still, it is a > workaround. > > > > Would it be possible to lower this limit to at least 100 Hz? > > > > 73 Notko/SA5NTK > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Change request
Andy, I have start frequency of Wide Graph at 100Hz, even tried with start at 0Hz Rx freq. never goes below 200. Same for Tx freq. Same thing if I enter numeric values in corresponding boxes. Should mention that I am running FT8/4. 73 Notko/SA5NTK From: Andrew Neumeier via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] Sent: den 22 juni 2022 21:56 To: Notko Mermerski via wsjt-devel Cc: Andrew Neumeier Subject: Re: [wsjt-devel] Change request Notko, Can you not just change the start frequency in the Wide Graph? Mine is set at 100hz. 73, Andy, ka2uqw On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net> > wrote: Hi everybody, I am running WSJT-X 2.5.4. Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red bracket) below 200Hz. I can understand that there is a rationale for this limit, but modern TRXes are capable of receiving below 200Hz. I am seeing decoded messages below 200Hz and I would like to be able to monitor them in the Rx pane of WSTJ-X main window. I am aware that there is a workaround to achieve this, but still, it is a workaround. Would it be possible to lower this limit to at least 100 Hz? 73 Notko/SA5NTK ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Change request
Notko, Can you not just change the start frequency in the Wide Graph? Mine is set at 100hz. 73,Andy, ka2uqw On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via wsjt-devel wrote: Hi everybody, I am running WSJT-X 2.5.4. Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red bracket) below 200Hz. I can understand that there is a rationale for this limit, but modern TRXes are capable of receiving below 200Hz. I am seeing decoded messages below 200Hz and I would like to be able to monitor them in the Rx pane of WSTJ-X main window. I am aware that there is a workaround to achieve this, but still, it is a workaround. Would it be possible to lower this limit to at least 100 Hz? 73 Notko/SA5NTK ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Change request
Hi everybody, I am running WSJT-X 2.5.4. Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red bracket) below 200Hz. I can understand that there is a rationale for this limit, but modern TRXes are capable of receiving below 200Hz. I am seeing decoded messages below 200Hz and I would like to be able to monitor them in the Rx pane of WSTJ-X main window. I am aware that there is a workaround to achieve this, but still, it is a workaround. Would it be possible to lower this limit to at least 100 Hz? 73 Notko/SA5NTK ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
