[wsjt-devel] fyi

[robert evans LAST_NAME via wsjt-devel]

https://www.rferl.org/a/rferl-named-undesirable-organization-russia/32828106.html
 ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] fyi

[robert evans LAST_NAME via wsjt-devel]

https://www.rferl.org/a/russia-economy-western-sanctions-evasion-tighten-loopholes/32306647.html

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bensay 1]

Dear Bill,

Thanks for your answer,
Kinda Texas style shoot first talk later.
Sorry my second mail was draft one and was also send.

Best greetings from Houston / TX.

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:49, Bill Somerville  a écrit :


Hi Benjamin,

apologies, but I do have you down to test with the FT-991. Uwe was just 
offering his observations. You are jumping the gun, I have not yet sent out the 
test version and test plan. Please be patient you are not missing out.

73
Bill
G4WJS.

On 21/01/2021 12:36, Bensay 1 wrote:
Hi Bill,

I just check back my outbox to be sure about this but yesterday at 5:28pm I 
offered to be part of the test for the only yaesu rig I own and wasn’t yet 
offered to test the Yaesu FT-991.

Let’s me know about it.

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:07, Bill Somerville 
 a écrit :


Hi Benjamin,

you responded with an offer to test two rigs, I chose the one that no one else 
had offered at that time. I am trying to spread the work across as many 
responders as possible without duplication.

73
Bill
G4WJS.

On 21/01/2021 11:44, Bensay 1 wrote:
Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville 
 a écrit :


Hi Uwe,

thanks for the update. I need quite specific test run and also to see the 
diagnostic trace. I will send out a test plan once some issues for another rig 
have been resolved.

73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An: wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:


Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.


Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bill Somerville]

Benjamin,

I am losing patience with your complaints. Please read and understand my 
updates on this matter.


73
Bill
G4WJS.

On 21/01/2021 12:42, Bensay 1 wrote:

Then Uwe reply 11 minutes later with the same offer - same rig at 5:39pm;

First reply - First chosen basis.

Let’s me know.

Benjamin L / F4FPR / K5AW


Le 21 janv. 2021 à 13:36, Bensay 1  a écrit :

 Hi Bill,

I just check back my outbox to be sure about this but yesterday at 
5:28pm I offered to be part of the test for the only yaesu rig I own 
and wasn’t yet offered to test the Yaesu FT-991.


Let’s me know about it.

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:07, Bill Somerville  a 
écrit :



Hi Benjamin,

you responded with an offer to test two rigs, I chose the one that 
no one else had offered at that time. I am trying to spread the work 
across as many responders as possible without duplication.


73
Bill
G4WJS.

On 21/01/2021 11:44, Bensay 1 wrote:

Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville  
a écrit :



Hi Uwe,

thanks for the update. I need quite specific test run and also to 
see the diagnostic trace. I will send out a test plan once some 
issues for another rig have been resolved.


73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An:wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:

Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.

Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bill Somerville]

Hi Benjamin,

apologies, but I do have you down to test with the FT-991. Uwe was just 
offering his observations. You are jumping the gun, I have not yet sent 
out the test version and test plan. Please be patient you are not 
missing out.


73
Bill
G4WJS.

On 21/01/2021 12:36, Bensay 1 wrote:

Hi Bill,

I just check back my outbox to be sure about this but yesterday at 
5:28pm I offered to be part of the test for the only yaesu rig I own 
and wasn’t yet offered to test the Yaesu FT-991.


Let’s me know about it.

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:07, Bill Somerville  a 
écrit :



Hi Benjamin,

you responded with an offer to test two rigs, I chose the one that no 
one else had offered at that time. I am trying to spread the work 
across as many responders as possible without duplication.


73
Bill
G4WJS.

On 21/01/2021 11:44, Bensay 1 wrote:

Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville  a 
écrit :



Hi Uwe,

thanks for the update. I need quite specific test run and also to 
see the diagnostic trace. I will send out a test plan once some 
issues for another rig have been resolved.


73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An:wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:

Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.

Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bensay 1]

Then Uwe reply 11 minutes later with the same offer - same rig at 5:39pm;

First reply - First chosen basis.

Let’s me know.

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:36, Bensay 1  a écrit :

 Hi Bill,

I just check back my outbox to be sure about this but yesterday at 5:28pm I 
offered to be part of the test for the only yaesu rig I own and wasn’t yet 
offered to test the Yaesu FT-991.

Let’s me know about it.

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:07, Bill Somerville  a écrit :


Hi Benjamin,

you responded with an offer to test two rigs, I chose the one that no one else 
had offered at that time. I am trying to spread the work across as many 
responders as possible without duplication.

73
Bill
G4WJS.

On 21/01/2021 11:44, Bensay 1 wrote:
Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville 
 a écrit :


Hi Uwe,

thanks for the update. I need quite specific test run and also to see the 
diagnostic trace. I will send out a test plan once some issues for another rig 
have been resolved.

73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An: wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:


Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.


Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bensay 1]

Hi Bill,

I just check back my outbox to be sure about this but yesterday at 5:28pm I 
offered to be part of the test for the only yaesu rig I own and wasn’t yet 
offered to test the Yaesu FT-991.

Let’s me know about it.

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 13:07, Bill Somerville  a écrit :


Hi Benjamin,

you responded with an offer to test two rigs, I chose the one that no one else 
had offered at that time. I am trying to spread the work across as many 
responders as possible without duplication.

73
Bill
G4WJS.

On 21/01/2021 11:44, Bensay 1 wrote:
Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville 
 a écrit :


Hi Uwe,

thanks for the update. I need quite specific test run and also to see the 
diagnostic trace. I will send out a test plan once some issues for another rig 
have been resolved.

73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An: wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:


Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.


Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bill Somerville]

Hi Benjamin,

you responded with an offer to test two rigs, I chose the one that no 
one else had offered at that time. I am trying to spread the work across 
as many responders as possible without duplication.


73
Bill
G4WJS.

On 21/01/2021 11:44, Bensay 1 wrote:

Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville  a 
écrit :



Hi Uwe,

thanks for the update. I need quite specific test run and also to see 
the diagnostic trace. I will send out a test plan once some issues 
for another rig have been resolved.


73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An:wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:

Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.

Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bensay 1]

Dear Bill,

Wasn’t I the first one responder for FT-991 ?

73s

Benjamin L / F4FPR / K5AW

Le 21 janv. 2021 à 11:55, Bill Somerville  a écrit :


Hi Uwe,

thanks for the update. I need quite specific test run and also to see the 
diagnostic trace. I will send out a test plan once some issues for another rig 
have been resolved.

73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An: wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:


Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.


Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[Bill Somerville]

Hi Uwe,

thanks for the update. I need quite specific test run and also to see 
the diagnostic trace. I will send out a test plan once some issues for 
another rig have been resolved.


73
Bill
G4WJS.

On 21/01/2021 10:46, DG2YCB, Uwe wrote:

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com]
Gesendet: Mittwoch, 20. Januar 2021 17:47
An:wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:

Hi All,

apologies for the cross-posting.

Due to some recent Hamlib updates to resolve long standing issues with
band changing on modern Yaesu rigs it has become necessary to do some
urgent tests to verify correct behaviour. This concerns the following
rigs and their variants:

FT-450
FT-891
FT-950
FT-991
FT-2000
FTdx1200
FTdx3000
FTdx5000
FTdx9000
FTdx101
FTdx10

I am looking for owners of one of these rigs who are willing to run a
short test to gather diagnostics to verify correct Hamlib behaviour.
It will require downloading and installing a test version of WSJT-X
and running a short test plan, then sending back a log file. It should
only take about 30 minutes to complete. If the test passes that will
be all, if there are failures there will be an opportunity to help
with further tests to help with fixing any defects found.

The urgency is because I want to complete this exercise on as many of
the above rig models before the imminent General Availability (GA)
release of WSJT-X v2.3.0. Without this verification we will not be
able to ship with the latest Hamlib library code, which means many
recent defect repairs and support for new rigs will not be available.

I currently have access to to an FT-2000 so that one is already dealt
with.

Thanks in advance.

73
Bill
G4WJS.

Hi all,

thanks to those who have kindly responded so far. I will initially chose
one of you for each rig model to do the tests, on a first replied -
first chosen basis, so apologies to those who don't get chosen, your
offer is still much appreciated. We have quite good coverage so far but
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] FYI: My Yaesu FT-991 seems to work well with Hamlib built 21-01-2021 at 11:16

[DG2YCB, Uwe]

Hi Bill and Mike,

For your information: I have just compiled wsjt-x v2.3.0-rc3 with a freshly
created hamlib (Build Date: 21-01-2021 at 11:16, source files from hamlib
master repository). Result: My Yaesu FT-991 seems to work without any
problems. Frequency changes and TX / RX work perfectly in both directions. I
did not find any undesirable effects.

73 de Uwe, DG2YCB

-Ursprüngliche Nachricht-
Von: Bill Somerville [mailto:g4...@classdesign.com] 
Gesendet: Mittwoch, 20. Januar 2021 17:47
An: wsjt-devel@lists.sourceforge.net
Betreff: Re: [wsjt-devel] Request to Yaesu rig owners

On 20/01/2021 15:30, Bill Somerville wrote:
> Hi All,
>
> apologies for the cross-posting.
>
> Due to some recent Hamlib updates to resolve long standing issues with 
> band changing on modern Yaesu rigs it has become necessary to do some 
> urgent tests to verify correct behaviour. This concerns the following 
> rigs and their variants:
>
> FT-450
> FT-891
> FT-950
> FT-991
> FT-2000
> FTdx1200
> FTdx3000
> FTdx5000
> FTdx9000
> FTdx101
> FTdx10
>
> I am looking for owners of one of these rigs who are willing to run a 
> short test to gather diagnostics to verify correct Hamlib behaviour. 
> It will require downloading and installing a test version of WSJT-X 
> and running a short test plan, then sending back a log file. It should 
> only take about 30 minutes to complete. If the test passes that will 
> be all, if there are failures there will be an opportunity to help 
> with further tests to help with fixing any defects found.
>
> The urgency is because I want to complete this exercise on as many of 
> the above rig models before the imminent General Availability (GA) 
> release of WSJT-X v2.3.0. Without this verification we will not be 
> able to ship with the latest Hamlib library code, which means many 
> recent defect repairs and support for new rigs will not be available.
>
> I currently have access to to an FT-2000 so that one is already dealt 
> with.
>
> Thanks in advance.
>
> 73
> Bill
> G4WJS. 
Hi all,

thanks to those who have kindly responded so far. I will initially chose 
one of you for each rig model to do the tests, on a first replied - 
first chosen basis, so apologies to those who don't get chosen, your 
offer is still much appreciated. We have quite good coverage so far but 
no responses yet from owners of the following models:

FT-950
FTdx9000
FTdx10

73
Bill
G4WJS.


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] FYI ...

[Neil Zampella]

Hi all,

just a heads up that when I tried to run the setup of v2.2.0-RC1, AVG
did not recognize it as valid, and automatically submitted it to AVG for
analysis.   Once its analyzed AVG will allow installation.

Takes about 5 or 10 minutes but once done, won't happen again. Notice,
it did not just delete the file, and give a bunch of cryptic warnings

Neil, KN3ILZ


--
This email has been checked for viruses by AVG.
https://www.avg.com



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Fyi

[Jon Anhold]

I think at this point we can safely assume many things are canceled, and
unless it is related to WSJT-X probably doesn't need to be shared here.

73 de KM8V

On Thu, Mar 12, 2020 at 3:58 PM  wrote:

> https://tcf-nj.org/
>
>
>
>
> -Original Message-
>
> From: n...@comcast.net
> To: w5...@sbcglobal.net, wsjt-devel@lists.sourceforge.net
> Sent: 2020-03-12 7:37:55 AM
> Subject: [wsjt-devel] Fyi
>
> The Official SATELLITE 2020 Statement - SATELLITE 2020
> https://www.satshow.com/the-official-satellite-2020-statement/
>
>
> DE N2LO~>
>
>
> -Original Message-
>
> From: w5...@sbcglobal.net
> To: wsjt-devel@lists.sourceforge.net
> Sent: 2020-03-12 7:32:15 AM
> Subject: [wsjt-devel] WSJT-X frequency display different from radio display
>
> Please see attachment.
> I could use some kelp on this problem.
> Thanx
> Bill Hoffman
> W5WJH
> ___ wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
> ___ wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Fyi

[n2lo]

https://tcf-nj.org/-Original Message-From: n...@comcast.netTo: w5...@sbcglobal.net, wsjt-devel@lists.sourceforge.netSent: 2020-03-12 7:37:55 AM Subject: [wsjt-devel] Fyi
The Official SATELLITE 2020 Statement - SATELLITE 2020https://www.satshow.com/the-official-satellite-2020-statement/DE N2LO~>-Original Message-From: w5...@sbcglobal.netTo: wsjt-devel@lists.sourceforge.netSent: 2020-03-12 7:32:15 AM Subject: [wsjt-devel] WSJT-X frequency display different from radio display
Please see attachment.I could use some kelp on this problem.ThanxBill HoffmanW5WJH
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Fyi

[n2lo]

The Official SATELLITE 2020 Statement - SATELLITE 2020https://www.satshow.com/the-official-satellite-2020-statement/DE N2LO~>-Original Message-From: w5...@sbcglobal.netTo: wsjt-devel@lists.sourceforge.netSent: 2020-03-12 7:32:15 AM Subject: [wsjt-devel] WSJT-X frequency display different from radio display
Please see attachment.I could use some kelp on this problem.ThanxBill HoffmanW5WJH
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi

[Star Light]

Yup - deleted it INSTANTLY...


Sent from my iPhone

> On Jan 2, 2019, at 4:56 PM, Gary McDuffie  wrote:
> 
> If you want someone to click that link, you should put some explanation for 
> what it is to convince people that it is legit.  I know very few people who 
> would click such a link without knowing what to expect to see there.  
> Wouldn’t touch it with YOUR ten foot pole, much less mine.
> 
> Gary - AG0N
> 
>> On Jan 2, 2019, at 14:31,   wrote:
> 
> 
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi

[Gary McDuffie]

If you want someone to click that link, you should put some explanation for 
what it is to convince people that it is legit.  I know very few people who 
would click such a link without knowing what to expect to see there.  Wouldn’t 
touch it with YOUR ten foot pole, much less mine.

Gary - AG0N

> On Jan 2, 2019, at 14:31,   wrote:



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi

[n2lo]

https://www-bbc-com.cdn.ampproject.org/v/s/www.bbc.com/news/amp/science-environment-46729898?amp_js_v=a2_gsa=1#amp_tf=From%20%251%24s=https%3A%2F%2Fwww.bbc.com%2Fnews%2Fscience-environment-46729898


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] fyi ft8v2rc4 ran ovr nite..

[robert evans LAST_NAME]

fyi ft8v2rc4 ran ovr nite..

win10 v1803 Precision M6800 i7-4710MQ 2.5GHz

just fine. (no mem leak. no prob.)


pskRep spot 40m.


will let it run agn 2nite.


BCNU DE N2LO~>






___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi ubuntu 18.04LTS

[Greg Beam]

Hello All,

In isolation, this approach may produce the desired results. However, it
violates concern separation and could break other applications that have
specific library dependencies. This is especially true at the system level.
User-Space library linking would be another topic entirely.

For Debian/Ubuntu based systems, a much better approach would be to use the
Debian Control File (DCF)--which is designed specifically for this type of
problem--to stipulate both the build and runtime dependencies for the
application in question.

Additionally, building the application locally will fail at some point. It
is not a matter of "if", rather, it is "when". Debootstrap is but one tool
users can employ to overt problems of this nature. Using Debootstrap, the
builder completely removes any locally installed libraries and deploys only
those stipulated in the DCF.

Nearly all distributed Ubuntu packages are built using a clean build
environment targeted against distribution revision coupled to an
architecture; e.g. (bionic-xyx-amd64.iso), where"xyz" can take the form of
Server, Desktop, and so on.

As with most all things Linux, there are many ways to skin the fish. While
some methods work, I would be hard-pressed to state manually linking is a
preferred option, or one I use most often.

73's
Greg, KI7MT

-Original Message-
From: Alan VK2ZIW [mailto:bea...@unixservice.com.au] 
Sent: Thursday, May 10, 2018 11:04 PM
To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] fyi ubuntu 18.04LTS

Hi Mike and all,

I've often added a symbolic link in the /lib or the /usr/lib directories
from a later library to, the one needed.
In Ubuntu 18.04 LTS, we have libreadline5 and libreadline7 but not
libreadline6.
eg.
cd /lib; ln -s libreadline.so.7.1 libreadline.so.6

Then refresh the library cache if needed. ldconfig

This often fixes a running program's issues but on installation, the Package
Manager may require an entry in the package database. Unpack the .deb file
with "ar x .deb" then unpack the main archive and install the files
manually.

Have fun.

Alan VK2ZIW


On Thu, 10 May 2018 18:58:28 -0400, W2NAP wrote
> deb package fails install without it.
> 
> On Thu, 10 May 2018 22:47:53 + (UTC) Black Michael via wsjt-devel 
> <wsjt-devel@lists.sourceforge.net> wrote:
> 
> > And why do we need libreadline6?
> > de Mike W9MDB
> > 
> >  
> > 
> > On Thursday, May 10, 2018, 12:47:53 PM CDT, W2NAP 
> > <w2ibc...@gmail.com> wrote:
> >  Not sure if anyone noticed. Libreadline6 is NOT in the 18.04 repos 
> > at all. unknown if it will ever be. work around seems to be 
> > installing the libreadline6 package from artful repo
> > https://packages.ubuntu.com/artful/libreadline6
> > 
> > just wanted to say something in case this was overlooked.
> > 
> > de w2nap
> > 
> > 
> > --

> > Check out the vibrant tech community on one of the world's most 
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
> > ___
> > wsjt-devel mailing list
> > wsjt-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >
> 
> --
> --
--
> Check out the vibrant tech community on one of the world's most 
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel


Alan

Evil flourishes when good men do nothing.
Consider the Christmas child.
---
Alan Beard   Unix Support Technician from 1984 to today
70 Wedmore Rd.   Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS
Emu Heights N.S.W. 2750  Routers, terminal servers, printers, terminals
etc..
+61 2 47353013 (h)   Support Programming, shell scripting, "C",
assembler
0414 353013 (mobile) After uni, electronics tech



--
Check out the vibrant tech community on one of the world's most engaging
tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi ubuntu 18.04LTS

[Alan VK2ZIW]

Hi Mike and all,

I've often added a symbolic link in the /lib or the /usr/lib directories
from a later library to, the one needed.
In Ubuntu 18.04 LTS, we have libreadline5 and libreadline7 but not
libreadline6.
eg.
cd /lib; ln -s libreadline.so.7.1 libreadline.so.6

Then refresh the library cache if needed. ldconfig

This often fixes a running program's issues but on installation, the
Package Manager may require an entry in the package database. Unpack the
.deb file with "ar x .deb" then unpack the main archive and install
the files manually.

Have fun.

Alan VK2ZIW


On Thu, 10 May 2018 18:58:28 -0400, W2NAP wrote
> deb package fails install without it.
> 
> On Thu, 10 May 2018 22:47:53 + (UTC)
> Black Michael via wsjt-devel  wrote:
> 
> > And why do we need libreadline6?
> > de Mike W9MDB
> > 
> >  
> > 
> > On Thursday, May 10, 2018, 12:47:53 PM CDT, W2NAP
> >  wrote: 
> >  Not sure if anyone noticed. Libreadline6 is NOT in the 18.04 repos at
> > all. unknown if it will ever be. work around seems to be installing
> > the libreadline6 package from artful repo
> > https://packages.ubuntu.com/artful/libreadline6
> > 
> > just wanted to say something in case this was overlooked.
> > 
> > de w2nap
> > 
> > --

> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > ___
> > wsjt-devel mailing list
> > wsjt-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >
> 
> 
--
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel


Alan

Evil flourishes when good men do nothing.
Consider the Christmas child.
---
Alan Beard   Unix Support Technician from 1984 to today
70 Wedmore Rd.   Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS
Emu Heights N.S.W. 2750  Routers, terminal servers, printers, terminals etc..
+61 2 47353013 (h)   Support Programming, shell scripting, "C", assembler
0414 353013 (mobile) After uni, electronics tech


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi ubuntu 18.04LTS

[W2NAP]

deb package fails install without it.

On Thu, 10 May 2018 22:47:53 + (UTC)
Black Michael via wsjt-devel  wrote:

> And why do we need libreadline6?
> de Mike W9MDB
> 
>  
> 
> On Thursday, May 10, 2018, 12:47:53 PM CDT, W2NAP
>  wrote: 
>  Not sure if anyone noticed. Libreadline6 is NOT in the 18.04 repos at
> all. unknown if it will ever be. work around seems to be installing
> the libreadline6 package from artful repo
> https://packages.ubuntu.com/artful/libreadline6
> 
> just wanted to say something in case this was overlooked.
> 
> de w2nap
> 
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>   


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] fyi ubuntu 18.04LTS

[Black Michael via wsjt-devel]

And why do we need libreadline6?
de Mike W9MDB

 

On Thursday, May 10, 2018, 12:47:53 PM CDT, W2NAP  
wrote:  
 
 Not sure if anyone noticed. Libreadline6 is NOT in the 18.04 repos at
all. unknown if it will ever be. work around seems to be installing the
libreadline6 package from artful repo
https://packages.ubuntu.com/artful/libreadline6

just wanted to say something in case this was overlooked.

de w2nap

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  --
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] fyi ubuntu 18.04LTS

[W2NAP]

Not sure if anyone noticed. Libreadline6 is NOT in the 18.04 repos at
all. unknown if it will ever be. work around seems to be installing the
libreadline6 package from artful repo
https://packages.ubuntu.com/artful/libreadline6

just wanted to say something in case this was overlooked.

de w2nap

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] FYI: Minnesota QSO Party and FT8

[Brian Moran]

The Minnesota QSO Party folks added FT8 for their event which occurred last
weekend. I asked Mark, WA0MHJ, how that turned out:

Hello Brian,

Well this is still an on-going experiment.

I have processed through 170 entrants so far. In those 170,  we have 22 who
have also sent ADIF files for FT-8 contacts. Two of the 22 are
non-Minnesota stations, who both made the minimum requirements for bonus
points. When all of the logs are in, I will tally the total number of
participants and QSO’s made.

Because of the difficulty in modifying exchanges in WSJT-X (i.e. not
sending county or section), we just used two recommended CQ macros. They
were:

For non-Minnesota: CQ MN W1XYZ

For Minnesota:  CQ MQP WB0AAA

Because the FT-8  logs are separate from the regular logs submitted, we
chose to not give QSO or multiplier credit, but just the bonus points. They
will count for the word challenge that we had, and there are several who
are working on programs to tally the number of letters achieved from the 1
x 1 calls from both types of logs.



73



Mark WA0MHJ
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel