Re: [wsjt-devel] Suggestion Hold TX Freq sticky
I did and Laurie said the same thing. I gave it a try just now and it DOES work. I guess there was just a glitch in my configurations when the FT8 RU was in progress. That was the last time I did a configuration change. That weekend, I had to restart JTAlert every time I went back to normal FT8. On Mon, Dec 17, 2018 at 11:31 AM Bill Somerville wrote: > On 17/12/2018 17:19, WB5JJJ wrote: > > If I do a configuration change, I have to stop and restart JTAlert as > > it doesn't connect again automatically to the new configuration. > > Hi George, > > that's not right, several versions ago changes were made to the WSJT-X > UDP protocol and to JTAlert to make configuration switching seamless. > Have you raised this issue on the JTAlert support forum? > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
Sorry. It seems to be working now. I just tried it. However, it did not function properly when I tried the FT8 Round Up a couple weekend back. This could have just been a glitch that day in my computer. Thanks. On Mon, Dec 17, 2018 at 2:25 PM Laurie, VK3AMA <_vk3a...@vkdxer.net> wrote: > > On 18/12/2018 4:19 am, WB5JJJ wrote: > > If I do a configuration change, I have to stop and restart JTAlert as > > it doesn't connect again automatically to the new configuration. > > That's OK when I go to DXP configuration since I will probably stay > > there for several hours. > > That should not be the case. > > JTAlert will automatically detect changes in WSJT-X when it changes > config and automatically readjusts itself ensuring docking and UDP > traffic monitoring for that WSJT-X instance continue. This has been > inplace since JTAlert version 2.10.0 (21-JUL-2017). There have been no > reports since then that this is not working. > > de Laurie VK3AMA > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
On 18/12/2018 4:19 am, WB5JJJ wrote: If I do a configuration change, I have to stop and restart JTAlert as it doesn't connect again automatically to the new configuration. That's OK when I go to DXP configuration since I will probably stay there for several hours. That should not be the case. JTAlert will automatically detect changes in WSJT-X when it changes config and automatically readjusts itself ensuring docking and UDP traffic monitoring for that WSJT-X instance continue. This has been inplace since JTAlert versionĀ 2.10.0 (21-JUL-2017). There have been no reports since then that this is not working. de Laurie VK3AMA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
No, I haven't. It's not that big of a deal to me when I go to/from DXP. It's just become habit, like checking the Hold box when going from MSK144 to FT8 - most times. On Mon, Dec 17, 2018 at 11:31 AM Bill Somerville wrote: > On 17/12/2018 17:19, WB5JJJ wrote: > > If I do a configuration change, I have to stop and restart JTAlert as > > it doesn't connect again automatically to the new configuration. > > Hi George, > > that's not right, several versions ago changes were made to the WSJT-X > UDP protocol and to JTAlert to make configuration switching seamless. > Have you raised this issue on the JTAlert support forum? > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
On 17/12/2018 17:19, WB5JJJ wrote: If I do a configuration change, I have to stop and restart JTAlert as it doesn't connect again automatically to the new configuration. Hi George, that's not right, several versions ago changes were made to the WSJT-X UDP protocol and to JTAlert to make configuration switching seamless. Have you raised this issue on the JTAlert support forum? 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
Yes, I do that for DXP and such that require several changes. But just to change modes, there is a drop down for that already that's just 2 clicks and everything continues along just fine. Plus the Auto Seq and Call 1st are sticky already. If I do a configuration change, I have to stop and restart JTAlert as it doesn't connect again automatically to the new configuration. That's OK when I go to DXP configuration since I will probably stay there for several hours. On Mon, Dec 17, 2018 at 11:07 AM Bill Somerville wrote: > On 17/12/2018 15:21, WB5JJJ wrote: > > As I change from MSK144 to FT8, the vast majority of the time I forget to > check the Hold Tx Freq box until I've moved off my clear spot. > > Could this box be made a sticky for either choice? > > Hi George, > > one easy option is to create a separate configuration for each mode > ("Menu->Configurations"). it is normally easier to switch configurations > (two mouse clicks) than to switch modes (two mouse clicks plus several more > to change other options and settings necessary for the new mode and > intended use). > > 73 > Bill > G4WJS. > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
On 17/12/2018 15:21, WB5JJJ wrote: As I change from MSK144 to FT8, the vast majority of the time I forget to check the Hold Tx Freq box until I've moved off my clear spot. Could this box be made a sticky for either choice? Hi George, one easy option is to create a separate configuration for each mode ("Menu->Configurations"). it is normally easier to switch configurations (two mouse clicks) than to switch modes (two mouse clicks plus several more to change other options and settings necessary for the new mode and intended use). 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
A single left mouse click in the box does the same and keeps the frequency in place. Also, the Auto Seq and Call 1st are sticky, so why not Hold Tx Freq? That's my question. On Mon, Dec 17, 2018 at 10:57 AM Bramax wrote: > Can I suggest, if you move the TX frequency with check automatically the Hold TX Freq box? > > Just my 2 cents. :) > > Maurizio I2NOY > > > Il 17/12/2018 16:21, WB5JJJ ha scritto: > > As I change from MSK144 to FT8, the vast majority of the time I forget > > to check the Hold Tx Freq box until I've moved off my clear spot. > > > > Could this box be made a sticky for either choice? > > > > -- > > George Cotton, WB5JJJ > > > > > > > > ___ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Suggestion Hold TX Freq sticky
Can I suggest, if you move the TX frequency with check automatically the Hold TX Freq box? Just my 2 cents. :) Maurizio I2NOY Il 17/12/2018 16:21, WB5JJJ ha scritto: As I change from MSK144 to FT8, the vast majority of the time I forget to check the Hold Tx Freq box until I've moved off my clear spot. Could this box be made a sticky for either choice? -- George Cotton, WB5JJJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Suggestion Hold TX Freq sticky
As I change from MSK144 to FT8, the vast majority of the time I forget to check the Hold Tx Freq box until I've moved off my clear spot. Could this box be made a sticky for either choice? -- George Cotton, WB5JJJ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel