Re: [wsjt-devel] WSJT-X suggestions
That also works for me. Alan G0TLK, sent from my mobile device On 16 June 2021 23:40:03 Jon Anhold wrote: I would say that what WSJT-X refers to as "Configurations" are commonly called "Profiles". 73 de KM8V On Wed, Jun 16, 2021 at 12:12 PM Bill Somerville wrote: Hi Alan, both of your suggestions fall at the first hurdle since WSJT-X Configurations are neither presets nor are they specific to modes. 73 Bill G4WJS. On 16/06/2021 16:54, al...@alangroups.plus.com wrote: Could I suggest a change of name from "Configurations" to something a bit more intuitive, maybe "User preset modes" or "User presets"? Might help with understanding their power. Alan G0TLK On 16/06/2021 16:24, Joe Taylor wrote: Hi Roger, On 6/15/2021 5:06 PM, Roger Shultz via wsjt-devel wrote: As an EME operator I find a couple things that is lacking when using WSJT-X. Comparing a missing feature to WSJT10 for example, it is very nice to have the ability to see the Astronomical Data panel. Not everyone will want this if not operating EME so could it be a check box in Settings? Not sure what you're asking for, here. Is it something other than checking "Astronomical data" on the "View" menu? WSJT-X provides far more options here than are available on WSJT v10, though you probably won't need most of them for EME on 2m. A second thing I find that always trips me up is selecting which Q65 mode setting, i.e. A, B, C etc should be used . If on 6 or 2 meters as an example could the band chosen also set the mode sub letter? I guess the same requirement exists on JT65 as well. Q65 is used for many other purposes as well as EME, so it doesn't make sense to select a submode (or T/R sequence length) by band. What DOES make sense is to use the "Configurations" menu to set up a Configuration for each mode you use regularly. For example, a "Q65 EME 2m" configuration. Starting in or switching to this configuration would always put you in your selected submode. When I see good traces and no decodes, it is often because I didn’t go check the letter each time. Where this becomes more apparent and demanding is when switching back and forth from a station using Q65 and then another using JT65. Don't switch modes. Switch Configurations. MAP65 3.0 is now working just fine on the Delta 44 multi WDM-KS setting. Thanks for your help. Happy to hear that you're up and running with MAP65 3.0 ! -- 72, Joe, K1JT ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] WSJT-X suggestions
I would say that what WSJT-X refers to as "Configurations" are commonly called "Profiles". 73 de KM8V On Wed, Jun 16, 2021 at 12:12 PM Bill Somerville wrote: > Hi Alan, > > both of your suggestions fall at the first hurdle since WSJT-X > Configurations are neither presets nor are they specific to modes. > > 73 > Bill > G4WJS. > > On 16/06/2021 16:54, al...@alangroups.plus.com wrote: > > > > Could I suggest a change of name from "Configurations" to something a > > bit more intuitive, maybe "User preset modes" or "User presets"? > > Might help with understanding their power. > > > > Alan G0TLK > > On 16/06/2021 16:24, Joe Taylor wrote: > >> Hi Roger, > >> > >> On 6/15/2021 5:06 PM, Roger Shultz via wsjt-devel wrote: > >> > >>> As an EME operator I find a couple things that is lacking when using > >>> WSJT-X. > >>> > >>> Comparing a missing feature to WSJT10 for example, it is very nice > >>> to have the ability to see the Astronomical Data panel. Not everyone > >>> will want this if not operating EME so could it be a check box in > >>> Settings? > >> > >> Not sure what you're asking for, here. Is it something other than > >> checking "Astronomical data" on the "View" menu? > >> > >> WSJT-X provides far more options here than are available on WSJT v10, > >> though you probably won't need most of them for EME on 2m. > >> > >>> A second thing I find that always trips me up is selecting which Q65 > >>> mode setting, i.e. A, B, C etc should be used . If on 6 or 2 meters > >>> as an example could the band chosen also set the mode sub letter? I > >>> guess the same requirement exists on JT65 as well. > >> > >> Q65 is used for many other purposes as well as EME, so it doesn't > >> make sense to select a submode (or T/R sequence length) by band. > >> > >> What DOES make sense is to use the "Configurations" menu to set up a > >> Configuration for each mode you use regularly. For example, a > >> "Q65 EME 2m" configuration. Starting in or switching to this > >> configuration would always put you in your selected submode. > >> > >>> When I see good traces and no decodes, it is often because I didn’t > >>> go check the letter each time. Where this becomes more apparent and > >>> demanding is when switching back and forth from a station using Q65 > >>> and then another using JT65. > >> > >> Don't switch modes. Switch Configurations. > >> > >>> MAP65 3.0 is now working just fine on the Delta 44 multi WDM-KS > >>> setting. Thanks for your help. > >> > >> Happy to hear that you're up and running with MAP65 3.0 ! > >> > >> -- 72, Joe, K1JT > > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] WSJT-X suggestions
Hi Alan, both of your suggestions fall at the first hurdle since WSJT-X Configurations are neither presets nor are they specific to modes. 73 Bill G4WJS. On 16/06/2021 16:54, al...@alangroups.plus.com wrote: Could I suggest a change of name from "Configurations" to something a bit more intuitive, maybe "User preset modes" or "User presets"? Might help with understanding their power. Alan G0TLK On 16/06/2021 16:24, Joe Taylor wrote: Hi Roger, On 6/15/2021 5:06 PM, Roger Shultz via wsjt-devel wrote: As an EME operator I find a couple things that is lacking when using WSJT-X. Comparing a missing feature to WSJT10 for example, it is very nice to have the ability to see the Astronomical Data panel. Not everyone will want this if not operating EME so could it be a check box in Settings? Not sure what you're asking for, here. Is it something other than checking "Astronomical data" on the "View" menu? WSJT-X provides far more options here than are available on WSJT v10, though you probably won't need most of them for EME on 2m. A second thing I find that always trips me up is selecting which Q65 mode setting, i.e. A, B, C etc should be used . If on 6 or 2 meters as an example could the band chosen also set the mode sub letter? I guess the same requirement exists on JT65 as well. Q65 is used for many other purposes as well as EME, so it doesn't make sense to select a submode (or T/R sequence length) by band. What DOES make sense is to use the "Configurations" menu to set up a Configuration for each mode you use regularly. For example, a "Q65 EME 2m" configuration. Starting in or switching to this configuration would always put you in your selected submode. When I see good traces and no decodes, it is often because I didn’t go check the letter each time. Where this becomes more apparent and demanding is when switching back and forth from a station using Q65 and then another using JT65. Don't switch modes. Switch Configurations. MAP65 3.0 is now working just fine on the Delta 44 multi WDM-KS setting. Thanks for your help. Happy to hear that you're up and running with MAP65 3.0 ! -- 72, Joe, K1JT ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] WSJT-X suggestions
Could I suggest a change of name from "Configurations" to something a bit more intuitive, maybe "User preset modes" or "User presets"? Might help with understanding their power. Alan G0TLK On 16/06/2021 16:24, Joe Taylor wrote: Hi Roger, On 6/15/2021 5:06 PM, Roger Shultz via wsjt-devel wrote: As an EME operator I find a couple things that is lacking when using WSJT-X. Comparing a missing feature to WSJT10 for example, it is very nice to have the ability to see the Astronomical Data panel. Not everyone will want this if not operating EME so could it be a check box in Settings? Not sure what you're asking for, here. Is it something other than checking "Astronomical data" on the "View" menu? WSJT-X provides far more options here than are available on WSJT v10, though you probably won't need most of them for EME on 2m. A second thing I find that always trips me up is selecting which Q65 mode setting, i.e. A, B, C etc should be used . If on 6 or 2 meters as an example could the band chosen also set the mode sub letter? I guess the same requirement exists on JT65 as well. Q65 is used for many other purposes as well as EME, so it doesn't make sense to select a submode (or T/R sequence length) by band. What DOES make sense is to use the "Configurations" menu to set up a Configuration for each mode you use regularly. For example, a "Q65 EME 2m" configuration. Starting in or switching to this configuration would always put you in your selected submode. When I see good traces and no decodes, it is often because I didn’t go check the letter each time. Where this becomes more apparent and demanding is when switching back and forth from a station using Q65 and then another using JT65. Don't switch modes. Switch Configurations. MAP65 3.0 is now working just fine on the Delta 44 multi WDM-KS setting. Thanks for your help. Happy to hear that you're up and running with MAP65 3.0 ! -- 72, Joe, K1JT ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] WSJT-X suggestions
Hi Roger, On 6/15/2021 5:06 PM, Roger Shultz via wsjt-devel wrote: As an EME operator I find a couple things that is lacking when using WSJT-X. Comparing a missing feature to WSJT10 for example, it is very nice to have the ability to see the Astronomical Data panel. Not everyone will want this if not operating EME so could it be a check box in Settings? Not sure what you're asking for, here. Is it something other than checking "Astronomical data" on the "View" menu? WSJT-X provides far more options here than are available on WSJT v10, though you probably won't need most of them for EME on 2m. A second thing I find that always trips me up is selecting which Q65 mode setting, i.e. A, B, C etc should be used . If on 6 or 2 meters as an example could the band chosen also set the mode sub letter? I guess the same requirement exists on JT65 as well. Q65 is used for many other purposes as well as EME, so it doesn't make sense to select a submode (or T/R sequence length) by band. What DOES make sense is to use the "Configurations" menu to set up a Configuration for each mode you use regularly. For example, a "Q65 EME 2m" configuration. Starting in or switching to this configuration would always put you in your selected submode. When I see good traces and no decodes, it is often because I didn’t go check the letter each time. Where this becomes more apparent and demanding is when switching back and forth from a station using Q65 and then another using JT65. Don't switch modes. Switch Configurations. MAP65 3.0 is now working just fine on the Delta 44 multi WDM-KS setting. Thanks for your help. Happy to hear that you're up and running with MAP65 3.0 ! -- 72, Joe, K1JT ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel