Thank you everyone who responded. We tried to disable DEP and that did
not solve the issue.
The first time the issue arose, it looked like it was running as a
service - (the status said it was running), but no one could log into
the built server. Clients would receive a -10002 error.
Becau
As an interim solution you might be able to run a virtual PC with Win 7.
--
D Samson
**
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive: http://lists.4d.com/archives.html
Options: https://lists.4d.co
We run v13.5 on Win 10 on just not on the Server End. If you are running a 4D
Server on Win 10 as opposed to Win Server, I would check that there was Windows
where you had to open up ports in the Win Fire Wall and also allow for Code
Execution from a separate file.
Thanks,
Kevin Abraham
Digital
Windows 10 has tightened security. Someone else suggested checking to make
sure structure and data file are not set to read only. I would also recommend
trying to run as Admin. (Right click on 4D server app, select “run as Admin”
and select structure). Good luck.
> On Jan 19, 2021, at 10:39
It crossed my mind that v13 may not run on Win 10 Pro.
The upgrade from Windows 7 was done without my knowledge - or I would
have asked this list for previous experiences.
Thanks,
Ken
On 01/19/21 10:36 AM, Kenneth Geiger wrote:
I believe that 4D v13 and Win10 are not really compatible. I
Thank you for responding.
The structure and data files are NOT set to Read Only. They are read-write.
Any other suggestions are greatly appreciated. I'm at a loss...
I'm assuming that v13.6 should run on Win 10 Pro.
On 01/19/21 10:27 AM, Spencer Hinsdale wrote:
Does this maybe mean the S
I believe that 4D v13 and Win10 are not really compatible. I also believe that
4D v15 is the oldest version supported on Win10.
> On Jan 19, 2021, at 8:21 AM, Ken Eyring via 4D_Tech <4d_tech@lists.4d.com>
> wrote:
>
> I am trying to help a business that has a Built 4D Server (v13.6) that was
>
Does this maybe mean the Structure is locked? Restart the computer to release
any hold Windows has on it. Get Properties and change Permissions as needed.
Set the preference inside 4D Server to Allow Read Only Structure...
On 1/19/21, 7:21 AM, "4D_Tech on behalf of Ken Eyring via 4D_Tech"
I am trying to help a business that has a Built 4D Server (v13.6) that
was developed by another developer.
It was running fine on Friday - while running on Win 7.
Their IT upgraded the server OS to Win 10 Pro, Windows Experience Pack
120.2212.551.0.
When I attempt to launch the built server
4d.com> wrote:
> >
> > No, I didn't. So will try that. Thanks
> >
> >> On Sun, Feb 23, 2020 at 3:37 PM Randy Kaempen
> >> wrote:
> >>
> >> Tom,
> >>
> >>> On Feb 23, 2020, at 5:33 PM, Tom Dillon via 4D_Tec
Are you running low on disk space?
On Sun, 23 Feb 2020 at 23:34, Tom Dillon via 4D_Tech <4d_tech@lists.4d.com>
wrote:
> I am not sure if this is the right forum but I need help on a problem
> that's just cropped up.
>
> I have been successfully building stand alone app
> Tom,
>>
>>> On Feb 23, 2020, at 5:33 PM, Tom Dillon via 4D_Tech <
>> 4d_tech@lists.4d.com> wrote:
>>>
>>> I am not sure if this is the right forum but I need help on a problem
>>> that's just cropped up.
>>>
>>> I
No, I didn't. So will try that. Thanks
On Sun, Feb 23, 2020 at 3:37 PM Randy Kaempen
wrote:
> Tom,
>
> > On Feb 23, 2020, at 5:33 PM, Tom Dillon via 4D_Tech <
> 4d_tech@lists.4d.com> wrote:
> >
> > I am not sure if this is the right forum but I need help o
Tom,
> On Feb 23, 2020, at 5:33 PM, Tom Dillon via 4D_Tech <4d_tech@lists.4d.com>
> wrote:
>
> I am not sure if this is the right forum but I need help on a problem
> that's just cropped up.
>
> I have been successfully building stand alone apps using V13.3 f
it is really important to specify the platform (OS)
but assuming this is Mac, maybe you have some unexpected files inside one of
your database folders (components, resources, plugins, extras, etc) that can
not be copied.
On Feb 24, 2020, at 8:33, Tom Dillon via 4D_Tech
<4d_tech@lists.4d.com
I am not sure if this is the right forum but I need help on a problem
that's just cropped up.
I have been successfully building stand alone apps using V13.3 for years
now and suddenly each time I try to "Build the app" it starts coping over
file but just before it finishes 4d
Hi again,
It was discussed here :
http://forums.4d.fr/Post/FR/19031749/2/19066921#19066921
And there is a fix in 4D v15.4 HF1
ACI0096430 A query on three fields including a composite index
could lead to a crash.
And Miyako gave further details :
the revised summary
Hi,
Maybe we should report it to 4D (I did not report it must admit)...
Would you mind doing it ?
Thanks
Bruno
**
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
Archive: http://lists.4d.com/archives.html
for reference:
the issue is in question is ACI0096430
http://bugs.4d.fr/fixedbugslist?Version=15.4_HF1
tip:
some query examples for the URL
http://bugs.4d.fr/fixedbugslist?Version=15.4
http://bugs.4d.fr/fixedbugslist?Version=16_R3
http://bugs.4d.fr/fixedbugslist?Branch=16
> 2017/07/23 8:30、
Sounds like you’re using 15.4 - original release.
There was an issue with composite indexes that was quickly fixed in the hot
fixes.
> On Jul 22, 2017, at 5:54 PM, Kirk Brooks via 4D_Tech <4d_tech@lists.4d.com>
> wrote:
>
> Sannyasin,
> I took Bruno's suggestion and deleted the composite inde
Sannyasin,
I took Bruno's suggestion and deleted the composite index for these two
fields. After that I was still getting a crash but it had moved further
down the execution chain. So I just deleted all the composite indexes.
That seemed to fix the problem.
On Sat, Jul 22, 2017 at 2:20 PM, Sannya
Code looks fine to me. Is it possible $1 or $2 is accidentally the wrong type
(aka, not text). I’ve had fun crashes by accidentally passing an array that
should have been just text…
Or maybe you are testing that already, just not in the code below.
Sannyasin Siddhanathaswami
On Jul 21, 2017,
Bruno,
That seems to be the issue. I say 'seems' because I could run the same
method with the same parameters in a different context and not have a
problem. And like I said this method is called very frequently. None the
less when I took out the composite index the problem shifted further down
the
Oh yeah, the composite index thing. I'd forgotten that one and this is
15.4. Good suggestion, I'll have to look at that.
On Sat, Jul 22, 2017 at 1:23 AM, Bruno LEGAY via 4D_Tech <
4d_tech@lists.4d.com> wrote:
> Hi Kirk,
>
> We recently encountered a crash on a QUERY after adding a composite
> ind
Hi Kirk,
We recently encountered a crash on a QUERY after adding a composite index...
We removed composite index, no more crash...
Do you have composite indexes ?
HTH
Bruno
**
4D Internet Users Group (4D iNUG)
FAQ: http://lis
Kirk, something seems odd about this code. Toward the end you have:
If ($key#"")
QUERY([KVP];[KVP]key=$key;*)
QUERY([KVP]; & ;[KVP]dir=$dir;*)
QUERY([KVP])
End if
That last Query([Table]) would bring up the query editor. I’ve never tried
doing that at the end of a string of Query paramete
I need some ideas on a problem.
I'm getting a crash when a method runs. The method itself isn't the issue,
I think, because it gets called literally hundreds of times in a given
session. Here it is:
C_TEXT($1;$2;$dir;$key)
$key:=$1
$dir:=""
If (Count parameters=2)
$dir:=$2
End if
ASSERT($ke
://4d.1045681.n5.nabble.com/Off-Need-help-with-perl-called-from-4D-tp5752505.html
Sent from the 4D Tech mailing list archive at Nabble.com.
**
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
Archive: http://
I can not help with your request, but you should be running on latest version
of 13 which I believe is 13.6
Regards
Chuck
Chuck Miller Voice: (617) 739-0306
Informed Solutions, Inc. Fax: (617) 232-
Keisuke Miyako made a presentation in 2012 at 4D Summit and I found it on
the 4D Knowledgebase titled "4D Summit: Google Apps Integration".
I have a major client that had asked me to look into integrating Google
Calendar with our 4D Application that runs his company, so this was very
interestin
in any case the data type should be "RAW"
if the printer doesn't accept image (incl. pdf) data,
you are out of luck.
> 2016/11/15 2:00、Darin Schroeder のメール:
> $pDatatype_t := ???
宮古 啓介
セールス・エンジニア
株式会社フォーディー・ジャパン
〒150-0043
東京都渋谷区道玄坂1-10-2 渋谷THビル6F
Tel: 03-6427-8441
Fax: 03-6427-8449
keisu
I think it all depends on the printer (driver)
some printers offer a "direct print" feature
in which case
lpr -s ... -o l "1.pdf"
actually works. (or, to find out, just drag and drop the pdf file to a printer
shortcut on the desktop and see what happens)
otherwise, the printer will just print
Hi Miyako,
If you could provide some insight to the definition of $4 when printing
PDFs from Windows it would be great.I currently do it another way, but
would love to try this out to compare.
I'm assuming I could then do something like this?
C_LONGINT($err_l)
C_BLOB($pdf_x)
C_TEXT($printerName_
Fs.
Fore some PowerShell in 4D background, see http://kb.4d.com/assetid=76530
Regards,
Peter
--
View this message in context:
http://4d.1045681.n5.nabble.com/Need-help-with-LEP-printing-tp5748583p5748624.html
Sent from the 4D Tech mai
Hey Tim,
On Thu, Nov 10, 2016 at 4:22 PM, Tim Nevels wrote:
> Nice that Miyako made a plugin especially for you and your situation to
> print a PDF. I’m sure you will get it working.
>
You flatter me. (I think.) But the timestamp on gitHub suggests the last
update on it was over 2 months ago.
On Nov 10, 2016, at 6:09 PM, Kirk Brooks wrote:
> Hi Miyako,
> Thanks for this. It works great on MAC OS but I have been unable to figure
> out how to pass the correct parameter for the pDatatype that corresponds to
> PDF on the windows side. Or even what the PDF param would be...
Nice that Miyak
Hi Miyako,
Thanks for this. It works great on MAC OS but I have been unable to figure
out how to pass the correct parameter for the pDatatype that corresponds to
PDF on the windows side. Or even what the PDF param would be...
On Thu, Nov 10, 2016 at 10:55 AM, Keisuke Miyako
wrote:
> https://gith
https://github.com/miyako/4d-plugin-direct-print
should allow you to do something like:
PRINT BLOB(Get current printer;$PDF;$ERR;"application/pdf")
宮古 啓介
セールス・エンジニア
株式会社フォーディー・ジャパン
〒150-0043
東京都渋谷区道玄坂1-10-2 渋谷THビル6F
Tel: 03-6427-8441
Fax: 03-6427-8449
keisuke.miy...@4d.com
www.4D.com/JP
Hi Kirk,
If you are in Mac Terminal, and issue the same command, does it work from
there?
Make sure you are testing the same shell as you specified in the command, like
this:
1) Open Mac Terminal.app
2) Navigate to the directory containing the pdf
3) Change the shell to /bin/sh by issuing th
Hi folks,
I have a routine that generates a blob of a PDF and I'd like to be able to
have it print directly without opening it in a PDF viewer. This seems like
the sort of thing where LEP is the solution.
I found an exchange from earlier this year that seemed to be exactly what I
need since it was
Thanks! I will have a look. I now remember needing to add cert separately for
curl.exe, prior to OAuth plugin (non-blocking!). Thanks again.
> On Oct 28, 2016, at 12:03 AM, Keisuke Miyako wrote:
>
> please study the method "HTTPS_DEBUG" provided with the plugin's sample
> database.
>
> C_
please study the method "HTTPS_DEBUG" provided with the plugin's sample
database.
C_BLOB($in;$out)
C_LONGINT($err)
ARRAY LONGINT($tNomOption;0)
ARRAY TEXT($tValOption;0)
APPEND TO ARRAY($tNomOption;CURLOPT_SSL_VERIFYHOST)
APPEND TO ARRAY($tValOption;"1")
APPEND TO ARRAY($tNomOption;CURLOPT_SSL_V
Hi Miyako,
I recently tried replacing OAuth.bundle (10/10/14) with cURL.bundle (9/30/16)
and ran into a problem with Error 60:
Peer certificate cannot be authenticated with known CA certificates.
I found that I could work around the problem by setting
CURLOPT_SSL_VERIFYPEER
to zero, which didn
ah, you got me there, it's called "Get unixtime" in common-crypto.
unix time is the time passed since 1 January 1970
https://en.wikipedia.org/wiki/Unix_time
> 2016/10/27 1:08、Kirk Brooks のメール:
> I notice there's one method that's been deleted: SYSTEM Get unixtime
> Easy enough, but does it need
Miyako,
Thanks for the reply. I found the presentation you did at the '12 Summit
where you used cURL & oAuth2 to connect to google. I'm working through that
since it details the steps.
I removed the deprecated oAUTH plugin and installed the new cURL and common
crypto.
I notice there's one method
the command names are exactly the same, nothing has changed other than the name
of the 2 plugins (the plugin has been split).
code written for the old plugin will work "as is" with the "curl" and
"common-crypto" plugins.
> 2016/10/26 22:31、Kirk Brooks のメール:
> oAuth plugin is deprecated in favor
Hi folks,
It turns out to have been a while since I set up something new like this. I
want to use Miyako's cURL plugin to establish a connection using oAuth. I
see the oAuth plugin is deprecated in favor of cUrl - but I don't see how
to set the headers properly.
Or is there a better way to accompl
47 matches
Mail list logo