Hi,
Off the top of my head, is the \ character possibly acting as an escape
character?
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
Archive: http://lists.4d.com/archives.html
Hi Bob,
I haven't tried it from 4D myself, but both WinRAR and 7zip can extract gZip
files and are available from the command line so it should be possible to use
LEP with them.
Best Regards,
-Tai B.
**
4D Internet Users Group
Hi,
Yes, this is still the case up to the most recent builds.
Initially you will need to create the double clickable app on their respective
platforms, but if you are allowing clients from both platforms to connect to a
server, you can enable the "Allow automatic update of {platform name} cli
Hi Mike,
You can actually manually check the version of OpenSSL used in 4D yourself:
http://kb.4d.com/assetid=76175
Checking myself Keisuke Miyako's post appears to be accurate.
Hope this helps.
Best Regards,
-Tai B.
**
4D Inte
Hi,
I'm not 100% certain, but I believe that it was due to the timings when
building them.
Actually v15.3 is 1.0.2j, while the v15.2 I have at hand is 1.0.1p. 15.3 was
probably and built when 1.0.2j was available while 16 Beta was probably built
with the 1.0.2h.
Makes sense in terms of timing
Hi Gary,
I tested it and it appears to be working fine in v15.3.
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
Archive: http://lists.4d.com/archives.html
Options: http://lists.4
Hi,
There a number of ways to do this. One way is to try using the Internet
Commands' IT_MyTCPAddr command:
http://doc.4d.com/4Dv16/4D-Internet-Commands/16/IT-MyTCPAddr.301-3069779.en.html
Best Regards,
-Tai B.
**
4D Internet Us
Hi,
The client only needs to connect to the updated server which will see an
upgrade exists and perform the upgrade. The user should not have to perform any
additional tasks.
Best Regards.
-Tai B.
**
4D Internet Users Group (4D
Hi,
Sorry I think I misunderstood the original question. Did you mean that you want
to detect the IP address or user name of the client environment connected to
the Terminal environment over a remote desktop connection through 4D ran on the
Terminal environment and not on the client environment
Hi,
The reason that the latest versions of PDFCreator do not work is due to the COM
Interface being changed by PDFCreator and is still in a beta status with
changes being applied.
http://www.pdfforge.org/pdfcreator/manual/com-interface
Best Regards,
-Tai B.
Hi Pat,
I think DIALOG might be the command you are looking for.
http://doc.4d.com/4Dv16R4/4D/16-R4/DIALOG.301-3317982.en.html
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
A
Hi David,
Would the DISTINCT VALUES command help?
http://doc.4d.com/4Dv16R4/4D/16-R4/DISTINCT-VALUES.301-3317277.en.html
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] On Behalf Of David Witton
via 4D_Tech
Sent: Tuesday, October 31, 2017
day, October 31, 2017 2:07 PM
To: Tai Bui
Subject: Re: identify duplicates
It helps with the single field problem - now I'm trying to solve the multiple
field problem without creating a new field for each combination of fields I
want to examine.
On Tue, Oct 31, 2017 at 2:43 PM, Tai Bui
Hi Jeremy,
Would the OBJECT SET RGB COLORS command with the third parameter
(backgroundColor) set to the constant 'Background color none' (-16) be what you
are looking for?
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] On Behalf Of Jere
Hi,
Most of the demos are v16.x and v16Rx, most likely the most recent releases at
the time of the summit are going to be used.
The certification matrixes for both can be found on the download site:
http://www.4d.com/downloads/products.html
If you want to follow along with the slides, we've allo
Hi Cannon,
You can download them from:
http://download.4d.com/Products/Current/4D_16R5/Installers/
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] On Behalf Of Cannon Smith
via 4D_Tech
Sent: Thursday, May 10, 2018 12:55 PM
To: 4D iNug Tech
Hi,
The documentation states
http://doc.4d.com/4Dv16R6/4D/16-R6/ST-SET-ATTRIBUTES.301-3547533.en.html :
"The startSel and endSel parameters can be used to designate the selection of
text to which to apply the style modification(s) within the object. In
startSel, you pass the position of the fir
Hi,
What parts of 4D?
On Windows, I opened 32-bit and 64-bit 4D v17 side by side and didn't see any
seemingly noticeable difference between the two in terms of 4D's UI, the method
editor, and a simple text variable object on a detail form.
I did notice that the font on the Welcome Wizard was a
Hi,
I have seen people using the Web Area to display charts using JS. Some have
mentioned D3, Highcharts, and Google Charts.
Maybe others can chime in with other references.
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] On Behalf Of Ronn
Hi,
For some reason it appears that the internet has been down since the ISP
performed their maintenance.
The ISP has been informed and should be working on it.
Apologies for the inconvenience.
Best Regards,
-Tai B.
**
4D In
Hi,
Not sure if these are the Best Solutions, but there are two Tech Tips regarding
this topic:
Find and fix all Blank or Null UUID fields in an entire database:
http://kb.4d.com/assetid=77576
A utility method that tests for a NIL UUID
http://kb.4d.com/assetid=77266
Hopefully this helps.
Best
Your assumption is true and it depends on the version of 4D that the Database
was created in.
http://doc.4d.com/4Dv15/4D/15/Unicode-mode-for-methods.300-2018652.en.html
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNU
Hi,
A command that I find very useful is the SVGTool_SHOW_IN_VIEWER command.
You pass the SVG document to it and it will display it in a new window which
also allows you to toggle to it's XML source.
Piggybacking off the earlier example:
C_TEXT($svg;$ref)
C_PICTURE($pict)
$svg:=SVG_New // th
Hi,
Perhaps the following two Tech Tips can give you an idea on how to implement
your feature:
If HTML5 is available:
http://kb.4d.com/assetid=77517
If Youtube is available:
http://kb.4d.com/assetid=77911
Best Regards,
-Tai B.
***
4D v16R6+ has a set of new icons to replace the old ones:
https://blog.4d.com/icon-modernization-continues/
They should be located at the installed location in a resources > images >
buttons folder.
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com>
Hi,
http://doc.4d.com/4Dv17R2/4D/17-R2.1720/Managing-users-and-groups.300-3839424.en.html
Under "Creating and configuring access groups"
"Keep in mind that once a group has been created, it cannot be deleted. If you
want to deactivate a group, you just need to remove any users it contains."
Bes
Hi,
The issue with this problem is that the data is needed through the 'On Mouse
Move' event which does not update the LISTBOX GET CELL POSITION command.
Instead you can create a method to get this information similarly to the
methods described in the following Tech Tips:
http://kb.4d.com/asset
Hi,
I believe the following Tech Tip can help:
http://kb.4d.com/assetid=77571
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
Archive: http://lists.4d.com/archives.html
Options
Hi,
Sorry I spoke too soon, I thought you wanted to find the primary key fields
name for a table, but you wanted the Name set in the preferences. I am not sure
why you need this, but it is stored at the end of the following file:
...\4D\Resources\default.4DPreferences
It is an xml formatted fil
Hi Doug,
The file contains the preferences configurations and should not be affected by
the SQL server at all. I am not too sure about modifying this file when 4D is
running however and would suggest that "read only" actions be performed.
Best Regards,
-Tai B.
***
Hi,
Are the fields set to "Invisible"? You can access this property in the field
properties of the structure editor window. If they are set to invisible they
will not be in the GET FIELD TITLES results.
Best Regards,
-Tai B.
**
Hi,
It is possible to perform an export of the structure definition which contains
the relationships. Most of the items are identified by UUIDs that 4D generates
automatically. You may be able to parse the file and recreate the relationships
by code as the relationships also contain the table a
Hi,
Have you tried passing 0 for the row number? According to the documentation:
"If position is 0 and if the action parameter contains Listbox replace
selection or is omitted, all the rows of the listbox are selected. If the
action parameter contains Listbox remove from selection, all the listb
Hi,
Bugs reports have already been made on the expand/collapse all shortcuts.
ACI0097204: [136792] Discrepancy Between Observed Behavior and Documented
Behavior
- Doc says that shortcut on Mac OS is Command+Click, that doesn't work but
Control+Click seems to work. (32 bit)
ACI0097205: [136790]
Hi Chip,
I haven't tested it myself but your last line of code using List item parent
doesn't look right.
According to the documentation the format is:
List item parent ( {* ;} list ; itemRef | * ) -> Function result
It looks like your format is following the GET LIST ITEM format:
GET LIST ITE
Hi,
Something else to try is maybe running as Administrator. Perhaps it is a
permissions issue.
Also where is the file located? Maybe you can try a simple new file on the
desktop and call it with a simple hardcoded method to make sure it works in the
first place to confirm it may have something
Hi,
Have you tried the OBJECT SET TITLE command?
OBJECT SET TITLE(*;"Button";Char(8984)+"T")
Works for me on Windows and Mac, 4Dv16 and 4Dv17.
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNUG)
Archive: http://lists.
Hi,
Hmm, not sure if it's just my machines or possibly caused by the emoji & symbol
editor. But copying and pasting the character as a text character and not as an
emoji/symbol allows me to paste the command symbol into the properties list
Title section, the form editor and running the form see
Hi,
The crash states an important item in Notes
"Translocated Process"
This means the application was translocated (moved) and is being run from a
real-only location.
Apple has been becoming more strict in how applications are distributing it and
this appears on Macs due to distribution of appl
Hi,
Another command within 4D that can be used is the OPEN URL command:
https://doc.4d.com/4Dv17R3/4D/17-R3/OPEN-URL.301-3906494.en.html
**
4D Internet Users Group (4D iNUG)
Archive: http://lists.4d.com/archives.html
Options:
Hi,
Can you create a brand new database?
If so you should have developer access on a .4DB file.
If not do you have a developer license installed?
Best Regards,
-Tai B.
**
4D Internet Users Group (4D iNUG)
Archive: http://lis
Hi,
It should be possible with the VP IMPORT DOCUMENT command
https://doc.4d.com/4Dv17R4/4D/17-R4/VP-IMPORT-DOCUMENT.301-4026489.en.html
The command should be able to import your .xlsx format Excel File into a 4D VP
area.
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech <4d_te
.
From: Jeremy Roussak
Sent: Tuesday, April 16, 2019 1:52 PM
To: 4D iNug Technical <4d_tech@lists.4d.com>; Tai Bui
Subject: RE: 4D View Pro question
Thanks - that will read the Excel document; but how do I create the VP area?
On 16 Apr 2019, 21:14 +0100, Tai Bui mailto:t...@4d.com>
Hi,
According to the Documentation
https://doc.4d.com/4Dv17R4/4D/17-R4/Moving-dialog-box.300-4085734.en.html
"...the dependent objects appear in italics..."
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Jeremy French via
4D_Tech
S
4D's constants?
I believe its in the xliff located at
{4D vXX}\{4D, 4D Server, or 4D VD...}\Resources\en.lproj\4D_ConstantsEN.xlf
I only have INTL installed so the en might be different based on local.
-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Chip Sc
Hi,
It should be available in the drop down for the "List Form" property of a
Subform object's property list:
Scroll down to the "Using a component subform (host database)" section for more
details and images:
https://doc.4d.com/4Dv15/4D/15.6/Interaction-between-components-and-host-databases.30
Hi Chip,
I see this feature in the explorer's Methods section. At the bottom click on
the gear drop down button and there is a "Batch Settings of attributes..." item.
This is on v15.6.
-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Chip Scheide via
4D_T
Hi All,
Just another tip:
It might be a little overkill in some cases, but 4D View Pro has built-in
formulas to convert a value to a barcode and qr codes.
The formulas start with "=BC_CO..." for most of the bar codes and
"=BC_QRCODE()" for the qrcode.
More information on the 11 types:
https://
To add onto that. Project mode does have a "shortcut" way to add fields and
field titles to the form:
https://kb.4d.com/assetid=78416
Best Regards,
-Tai B.
-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Tom Benedict via
4D_Tech
Sent: Wednesday, February 26,
49 matches
Mail list logo