2009/8/14 Lyndon Nerenberg :
>> This is what we do at Sandia. We have one machine which serves
>> cpu/auth/file, but the actual Venti disks are in a Coraid connected
>> via GigE. The fossil disk is in the server, but if it dies we can just
>> build a new one.
>
> Which reminds me of an often overlo
This is pretty much a show-stopper for me. I guess it's time to find a new
laptop with supported hardware.
or a usb ethernet device
Hi, I don't quite know what I'm asking, I'm just fishing for responses :)
I got a Matrox DualHead2Go which splits a vga signal across multiple
monitors. Atm. I have it driving two screen with a duplicated image but
if you supply it one of these modes :
edid 2048x76...@60hz
clock=113.75
>i'll add this southbridge to my cd. this will definately
>not hurt. could you send me pci output? if you use
>lspci from linux make sure to use -vn so the vid/did
>appear. the descriptive strings are fairly useless.
Sorry, I don't use Linux much. This machine currently runs OpenSolaris. Bel
> Anyone here had a chance to try a Dell E4300? It's a nice, compact system,
> but it really refuses to boot Plan 9:
>
> It has on-board SATA hd, SATA cd-rom, etc. I tried quanstro's 9atom.iso, and
> with the SATA controller in AHCI mode, it'll start booting, but hangs at:
>
> 4 => 818807
> > sorry.
> >
> > i did turn off probing legacy ports unless a recognized
> > pci device was found. this was paranoia on my part. (i hope.)
> > just trying to get past our sata drives with ide programming interface
> > problem. i've turned blind probing back on and will put out a new iso
> > sh
Anyone here had a chance to try a Dell E4300? It's a nice, compact system, but
it really refuses to boot Plan 9:
It has on-board SATA hd, SATA cd-rom, etc. I tried quanstro's 9atom.iso, and
with the SATA controller in AHCI mode, it'll start booting, but hangs at:
4 => 818807+1020832+47497
On Sat, Aug 15, 2009 at 12:34, erik quanstrom wrote:
>> I also tried booting from Erik's atom iso, but don't get very far. eg:
>> PBS1
>> Plan 9 from Bell Labs
>> ELCR: 0CA0
>> pcirouting: south bridge 10de, 0260 not found
>> aoepnp()
>> found 11 e820 entries
>> Boot devices: fd0 fd1
>> boot from:
I appreciate the suggestions, and I'll
definitely look into them when upgrades
are in order.
Making do with what we have, however,
I can now successfully conversate
with the printer, and initiate the print.
But there is a problem: after the first line
of output from the printer on the page,
usb/p
> I also tried booting from Erik's atom iso, but don't get very far. eg:
> PBS1
> Plan 9 from Bell Labs
> ELCR: 0CA0
> pcirouting: south bridge 10de, 0260 not found
> aoepnp()
> found 11 e820 entries
> Boot devices: fd0 fd1
> boot from:
>
> It doesn't detect IDE controller, so no local disk/CD-ROM
On Fri, Aug 14, 2009 at 10:12 PM, Akshat
Kumar wrote:
> gs(1) compiled fine with ijs driver - I hope it doesn't
> need to be updated as well. Thanks for the information,
> Russ.
>
> I found Prof. Okamoto's page on HPIJS 1.5
> port: http://basalt.cias.osakafu-u.ac.jp/plan9/s54.html
> (binaries linke
re: /etc/ssh/sshd_config on unix to support sshv1
see: http://plan9.bell-labs.com/wiki/plan9/Connecting_to_other_OSes/index.html
-Steve
Thanks, very interesting read.
I think he lied, he was perfectly aware of how the piracy issue would
turn out, and he had it all planned :D
On Fri, Aug 14, 2009 at 11:54 PM, Skip Tavakkolian<9...@9netics.com> wrote:
> an old interview with some relevance
>
> http://www.wired.com/wired/archive/3.0
I'm trying to get my circa 2006 laptop working with Plan 9.
Its a Gateway MX3414 with:
North Bridge: NVIDIA C51MV
South Bridge: MCP51 - ignored
NVIDIA GeForce Go 6100 graphics - works fine with 1024x768x16 VESA
NVIDIA MCP51 ethernet controller - not detected
NVIDIA MCP51 PATA controller - buggy? s
> However, I think you need the ijs
> driver, which is not built by default (it probably should be).
> To enable it, edit /sys/src/cmd/gs/mkfile to add ijs to the
> device list and then rebuild using the instructions in the
> mkfile.
I thought I'd built gs(1) this way with proper ijs support,
but
Speaking of fonts in Acme, using the default,
I spent extra amount of time tracking down
a bug in my gs(1) source, which was the mix-up
between -lijs and -Iijs. Apparently 'I' is shorter
than 'l' by some portion of a pixel.
how could I possibly miss that
ak
P.S.: This isn't Acme's fault - it's t
Ok, My memory from about 1982...
first there was phillips who used 2 high speed, high linearity 14bit DACs
in their CD players using 4 times oversampling - as they had no apropriate
16bit converters at the time; which gives near 16bit resolution.
sony however developed a laser trimmed 16bit conve
17 matches
Mail list logo
