Hi,
don't think so . Had this problem some years ago on aix-tsm 5.1.x server
and now actually the same on solaris-tsm 5.3.2.1 server.
When migrating from aix to solaris I first thought this problem
has evacuated. Moving our cyrus-mail-server on the new platform
the restore was continously very
unsbscribe
Morning all
Quick question. I have just noticed that one of our windows 2000 clients
(Client 5.1.6.0) seems to start up 7 separate sessions during archive or
backup processing. Any ideas what setting would be causing this?
Many thanks
Farren Minns
Farren,
Maybe RESOURCEUTILIZATION in dsm.opt ?
Cheers.
Arnaud
**
Panalpina Management Ltd., Basle, Switzerland,
CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH
Phone: +41 (61) 226 11 11, FAX: +41 (61) 226
Ahh, that might be it.
As soon as I can get one of the sys admin guys to give me some time, I'll
get them to check that.
Many thanks
Farren
|-+---|
| PAC Brion Arnaud | |
|
Hello everybody,
I've got a TSM server 5.3.2.2 running on Windows2003 Enterprise Edition SP1 (7
GB RAM, Xeon 3,2 GHz CPU) that has about 100 TSM clients defined.
Each month an export of each TSM node with the active backup data will be taken
to disk (DS4100 with SATA disks of 250 GB). The
Hi,
You confuse me, what are you trying to achieve?
Monthly exports could easily be replaced with archives or backup sets.
//Henrik
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Kurt Beyers
Sent: den 27 februari 2006 12:35
To:
Henrik,
Too many servers over LAN/WAN are in the picture to take a monthly archive in
just a weekend.
And because there are also many TDP backups, the export was chosen instead of
the backupset (only possible for a TSM BA client). The export could be taken
relative to a certain data too.
Is this just specific to 5.3.2.x? I am planning on upgrading
some Novell clients from 5.2.2 to 5.3.012 next week.
TSM 5.3.2.1
TSM novell client 5.2.2
NW 6.5 SP2
Thanks in advance!
Patrick Boutilier wrote:
Richard Sims wrote:
I'm Netware-ignorant, but this sounds like an install
Hello,
We have Backup Sets that run weekly on Saturday's starting at 9:00am,
They usually run into Sunday mornings. I am using Group Collocation
on them yet and I performed a Move Node after I group collocated
them yet they still use tapes that clients mostly Oracle which are
critical. I lowered
Timothy Hughes wrote:
Is this just specific to 5.3.2.x? I am planning on upgrading
some Novell clients from 5.2.2 to 5.3.012 next week.
I have seen the problem on both 5.3.0.0 and 5.3.012 as well. Problem is
the server has to be rebooted for the problem to show up. And any
changes you make
Are TSM Windows servers included?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Rainer Wolf
Sent: Monday, February 27, 2006 3:27 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] AW: (Too) long no query restore?
Hi,
don't think so . Had this
Has anyone out there tried the new 5.3 multi-threaded reclamation
process for offsite copypools?
I'm running on AIX at 5.3.2 and I have set the Reclamation Processes
parameter of my offsite copy pool to a number greater than 1 (I have
tried 4 and 2 as examples).
I then launch a reclamation
Thanks Patrick!
We one Novell client that uses 5.3.0
The NW OS is 6.5SP2
Another Novell client is at 5.3.03
NW OS5.1 SP7
Haven't notice a problem as of yet.
Patrick Boutilier wrote:
Timothy Hughes wrote:
Is this just specific to 5.3.2.x? I am planning on upgrading
some Novell clients
I have not used this new 5.3 option, but I have been doing automated
'move data' commands to achieve multithread reclaim on offsite volumes
for some time now. BUT I only do this for storagepools that are
collocated thus minimizing the likelihood of contention for onsite
volumes. If I were using
You're not crazy. I'm seeing it too. I only had one SP5 server and I've
just upped the client on it from 5.2.3 to 5.3.2 and it will not load on
boot.
Version 5.03.02 Sunday, September 18, 2005
Module DSMCAD.NLM load status OK
ANS1398E Initialization functions cannot open one of the Tivoli
Let me see if I understand you correctly. The export works fine when only
15 nodes are running, but after 2 hours when the second set of 15 nodes
kicks in (while some from the first group of 15 are stilli running) that
is when your server crashes? Or does your server crash with only 15 nodes
The server should not crash.
Ever.
End of story.
Call support.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
John Monahan
Sent: Monday, February 27, 2006 2:15 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: export nodes causes TSM server crash
Let me
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on 02/27/2006
11:55:42 AM:
Has anyone out there tried the new 5.3 multi-threaded reclamation
process for offsite copypools?
In both cases, within a few minutes of processing, all the reclamation
processes for this pool are competing for the
I am using collocated primary pools an a non-collocated offsite pool.
My apparently incorrect assumption is that if multiple processes are
going to work on the list of tapes to be reclaimed, then for offsite
tapes the list of needed files would be sorted and processed in a way so
that each
Andrew Ferris wrote:
You're not crazy. I'm seeing it too. I only had one SP5 server and I've
just upped the client on it from 5.2.3 to 5.3.2 and it will not load on
boot.
Version 5.03.02 Sunday, September 18, 2005
Module DSMCAD.NLM load status OK
ANS1398E Initialization functions cannot open
Timothy Hughes wrote:
Thanks Patrick!
We one Novell client that uses 5.3.0
The NW OS is 6.5SP2
The above loads dsmcad out of autoexec.ncf fine?
Another Novell client is at 5.3.03
NW OS5.1 SP7
Haven't notice a problem as of yet.
snip
John,
The export of just 15 nodes was tested earlier on. It contained the larger
nodes already. At that time, the TSM server just was slowly (high CPU
consumption and a lot of disk I/O which is normal of course). It worked fine.
The export of all of the nodes at the same time causes an
Can this be done with the standard TSM 5.3.X client, or do I need a
special app for this?
Mel Dennis
Hey all,
Windows Server 5.2.4 and client 5.2.4
We are looking at a restore of a common folder. 90,000 objects to
restore. The restore took 2 hours. My client guy was closely watching
the restore. He says 99% of the files restore quickly. Then the DB
drives work really hard for an
From: Whitlock, Brett
Sent: Monday, February 27, 2006 3:04 PM
To: 'ADSM: Dist Stor Manager'
Subject:
Hey all,
Windows Server 5.2.4 and client 5.2.4
We are looking at a restore of a common folder. 90,000 objects to
restore. The restore took 2
The following Redbook discusses how to do this:
http://publib-b.boulder.ibm.com/abstracts/redp3980.html?Open
At 03:56 PM 2/27/2006, Dennis Melburn W IT743 wrote:
Can this be done with the standard TSM 5.3.X client, or do I need a
special app for this?
Mel Dennis
--
Paul Zarnowski
I agree that the TSM server shouldn't ever crash, but just because it
shouldn't crash doesn't necessarily mean you should try to run 75 or 100
or 1000 exports concurrently either. Until a fix is produced, I would
just limit your concurrent exports to what you know works without
committing a
Here is my log from one backup attempt below...Server 5.3.1.2, Client
5.3.0.0
Incremental kicks off on this note...
02/27/2006 16:21:15 (TSA500.NLM 5.4 259) This program cannot allocate a
directory handle.
02/27/2006 16:21:15 fioScanDirEntry: root dir is not accessible, object
to scan
On Tuesday, Feb 28, 2006, at 07:56 Australia/Sydney, Dennis Melburn W
IT743 wrote:
Can this be done with the standard TSM 5.3.X client, or do I need a
special app for this?
Note that it also depends what table type is being used in MySQL.
I've found that MyISAM tables back up live OK with TSM
We've had lots of problems with Netware TSM clients in general at all
different sorts of levels for both TSM and Netware.
But I just wanted to suggest that one possible solution, which has
solved a lot of our problems with TSM clients abending and hanging (and
otherwise acting crappy) has been
31 matches
Mail list logo