Adding a second library to TSM/HSM

2011-06-16 Thread D'Antonio III, Vincent E (N-Aerotek)
Hello all, I am still very much a newbie with TSM.. I am adding a second library to use with HSM ts3310 LTO3, I have a current library active and in use. What I need to do is the following: Add new library so HSM will start using it while I migrate my data from the old

Re: Adding a second library

2002-07-09 Thread Stephen A. Cochran
On Wednesday, June 26, 2002, at 08:05 AM, Remeta, Mark wrote: Actually you can reconstruct the aggregates during a move data. I forget what version it started with but there is a command line option for move data called Reconstruct=yes that will reconstruct the aggregates during a move

Re: Adding a second library

2002-06-26 Thread Remeta, Mark
[mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 25, 2002 7:26 AM To: [EMAIL PROTECTED] Subject: Re: Adding a second library Stephen, you already found the *best* answer yourself - yes, set new stgpool as next to existing one and lower migration thresholds to 0. Just some additional remarks: - set

Re: Adding a second library

2002-06-26 Thread Paul Zarnowski
- From: Zlatko Krastev/ACIT [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 25, 2002 7:26 AM To: [EMAIL PROTECTED] Subject: Re: Adding a second library Stephen, you already found the *best* answer yourself - yes, set new stgpool as next to existing one and lower migration thresholds to 0. Just

Re: Adding a second library

2002-06-26 Thread Coats, Jack
: Adding a second library There's a third way - you can use reclaim. This is similar to move data, with reconstruct=yes, but is more automated. Just set reclaimstg to your new storage pool, and reclaim down to 1. You may have to do a few move datas at the end, to get the tapes that are 0

Re: Adding a second library

2002-06-26 Thread Remeta, Mark
Message- From: Cook, Dwight E [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 26, 2002 11:59 AM To: [EMAIL PROTECTED] Subject: Re: Adding a second library You ever been an MVS person ? Used partitioned data sets ? ? ? OK, TSM will do a trick where it bundles a lot of little files in a big

Re: Adding a second library

2002-06-26 Thread Cook, Dwight E
Science Applications International Corporation 509 S. Boston Ave. Suit 220 Tulsa, Oklahoma 74103-4606 Office (918) 732-7109 -Original Message- From: Coats, Jack [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 26, 2002 9:45 AM To: [EMAIL PROTECTED] Subject: Re: Adding a second library

Re: Adding a second library

2002-06-25 Thread Sharif, Munir Arshad
but you might get in loop of data coming in to old pool and then migrated to new pool, if you have lot of data. -Original Message- From: Stephen A. Cochran [mailto:[EMAIL PROTECTED]] Sent: Tue, June 25, 2002 6:02 AM To: [EMAIL PROTECTED] Subject: Adding a second library I've added a second

Re: Adding a second library

2002-06-25 Thread Zlatko Krastev/ACIT
: Subject:Adding a second library I've added a second 7337 library to our ADSM system (15 DLT robot with 2 drives). I've got the system seeing the library, and I have a new devclass defined with the new library. What I would like to do is have two of our stgpools (AFS_TAPE_POOL and COPYPOOL) we

Adding a second library

2002-06-24 Thread Stephen A. Cochran
I've added a second 7337 library to our ADSM system (15 DLT robot with 2 drives). I've got the system seeing the library, and I have a new devclass defined with the new library. What I would like to do is have two of our stgpools (AFS_TAPE_POOL and COPYPOOL) we have defined use this new library,