Well, I figured out what my problem was. In my dsm.opt file I hardcode
the path to my dsmerror and dsmsched logs. We put them at C:\Program
Files\Tivoli\TSM instead of letting them go to the \baclient\ folder.
Well, when I started the client for the image itself it was writing the
log files to
Well, I figured out what my problem was. In my dsm.opt file I hardcode the
path to my dsmerror and dsmsched logs. We put them at C:\Program
Files\Tivoli\TSM instead of letting them go to the \baclient\ folder. Well,
when I started the client for the image itself it was writing the log files
I had run chkdsk on an ealier run and that didn't change the results. I believe
that I saw that as a suggestion in the doc. In my next try I'll make sure to
try it again just to be sure.
It may be a few days before I can get back into the lab because we are
prepareing for our next disaster
/TSM/SAN
Hopital General Juif S.M.B.D.
Tel: (514) 340-8222 ext:8254
TSM_User
Sent by: ADSM: Dist Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through
] WinPE Image backup problem
Iain,
To which document do you refer? I am operating under the impression that
we are talking about the field guide Tivoli Storage Manager Recovery
Techniques Using Windows Preinstallation Environment (Windows PE)
available at http://www-1.ibm.com/support
] On Behalf Of
Andrew Raibeck
Sent: 26 February 2005 05:17
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Sorry, Iain, my misinterpretation of what you wrote about the procedures
not being written by IBM.
There is an email address [EMAIL PROTECTED] for submitting field
guide
2005 05:17
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Sorry, Iain, my misinterpretation of what you wrote about the procedures
not being written by IBM.
There is an email address [EMAIL PROTECTED] for submitting field
guide proposals in the introductory material
On Sat, Feb 26, 2005 at 03:24:19AM -, Iain Barnetson wrote:
Thanks for your msg, sarcasim is still the lowest form of wit by the
way.
It wasn't sarcasm, nor humour. Following those procedures is generally a
good idea, and in many cases would greatly speed up the process of solving
a
: [ADSM-L] WinPE Image backup problem
On Sat, Feb 26, 2005 at 03:24:19AM -, Iain Barnetson wrote:
Thanks for your msg, sarcasim is still the lowest form of wit by the
way.
It wasn't sarcasm, nor humour. Following those procedures is generally a
good idea, and in many cases would greatly
:8254
TSM_User
Sent by: ADSM: Dist Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on 2005-02-26
04:35:49:
Andy,
I just had a quick look at the 1st few pages of the v4.0 of the WinPE
document and found the following:
1) Doesn't state that the machine you're taking a backup of must be
already registered as a node in
:
Subject: WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager Recovery Techniques Using Windows Preinstallation
Environment (Windows PE) guide. I'm using the TSM V5.3 client and
my
WinPE CD is WinXP SP2.
I issue
@VM.MARIST.EDU
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject:WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager Recovery Techniques Using Windows
) 340-8222 ext:8254
TSM_User
Sent by: ADSM: Dist Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager Recovery Techniques
Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager Recovery Techniques Using Windows Preinstallation
Environment (Windows
Sent by: ADSM: Dist Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager Recovery Techniques Using Windows
TSM_User
Sent by: ADSM: Dist Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli
Storage Manager Recovery Techniques Using Windows
alerted IBM to this FACT.
Iain
-Original Message-
From: ADSM: Dist Stor Manager on behalf of Andrew Raibeck
Sent: Fri 25/02/2005 18:50
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Kyle, the procedure should work. The authors of the document work in TSM
development
to this FACT.
Iain
-Original Message-
From: ADSM: Dist Stor Manager on behalf of Andrew Raibeck
Sent: Fri 25/02/2005 18:50
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Kyle, the procedure should work. The authors of the document work in TSM
development
, emails bounce back
when sent to it.
Iain
-Original Message-
From: ADSM: Dist Stor Manager on behalf of Egon Blouder
Sent: Fri 25/02/2005 20:24
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Hi,
I've successfully restored a box using a WinPE/BartPE.
Regarding
Hi All
I'm testing backup and restore for more than a month using WINPE and
BARTPE
If you do incremental backup ... then a server crash .. with the WINPE,
it's working very good to restore a server using the normal restore (it's
a bit slow depending of the number of files to bring back)
but
to it.
Iain
-Original Message-
From: ADSM: Dist Stor Manager on behalf of Egon Blouder
Sent: Fri 25/02/2005 20:24
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Hi,
I've successfully restored a box using a WinPE/BartPE.
Regarding the guide itself
Juif S.M.B.D.
Tel: (514) 340-8222 ext:8254
TSM_User
Sent by: ADSM: Dist Stor Manager
2005-02-24 08:51 PM
Please respond to ADSM: Dist Stor Manager
To: ADSM-L@VM.MARIST.EDU
cc:
Subject: WinPE Image backup problem
I have my test lab all setup to run through
On Fri, Feb 25, 2005 at 08:09:45PM -, Iain Barnetson wrote:
I can tell you that the procedure as it is now DOES NOT work.
Read http://www.chiark.greenend.org.uk/~sgtatham/bugs.html for
more info about how to effectively solve your problem.
--
Jurjen Oskam
E-mail has just erupted like a
Read http://www.chiark.greenend.org.uk/~sgtatham/bugs.html ...
Good one, Jurjen.
Perusing redbooks, I came upon a good general source of TSM problem
analysis guidance in an unlikely place:
redpaper
Certification Study Guide for IBM Tivoli Storage Manager Version 5.2
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Andrew Raibeck
Sent: 25 February 2005 21:17
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
One more thing:
A colleague suggested that you obtain the Process Explorer utility from
] On Behalf Of
Jurjen Oskam
Sent: 25 February 2005 22:31
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
On Fri, Feb 25, 2005 at 08:09:45PM -, Iain Barnetson wrote:
I can tell you that the procedure as it is now DOES NOT work.
Read http://www.chiark.greenend.org.uk
to it.
Iain
-Original Message-
From: ADSM: Dist Stor Manager on behalf of Egon Blouder
Sent: Fri 25/02/2005 20:24
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] WinPE Image backup problem
Hi,
I've successfully restored a box using a WinPE/BartPE.
Regarding the guide itself
: [ADSM-L] WinPE Image backup problem
Iain,
To which document do you refer? I am operating under the impression that
we are talking about the field guide Tivoli Storage Manager Recovery
Techniques Using Windows Preinstallation Environment (Windows PE)
available at http://www-1.ibm.com/support
I have my test lab all setup to run through the steps in the Tivoli Storage
Manager Recovery Techniques Using Windows Preinstallation Environment (Windows
PE) guide. I'm using the TSM V5.3 client and my WinPE CD is WinXP SP2.
I issue the command dsmc.exe backup image c: -imagetype=static
yet. That was
nearly 6 months ago.
Iain
-Original Message-
From: ADSM: Dist Stor Manager on behalf of TSM_User
Sent: Fri 25/02/2005 01:51
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] WinPE Image backup problem
I have my test lab all setup to run through the steps in the Tivoli Storage
31 matches
Mail list logo