Hello Everybody,
I have no problems at all with Oracle+RMAN+TDPO+TSM environment. I have:
1) dedicated nodes for database backups, separated from file system backups
(for example, LPAR05 for files and LPAR05_ORA for databases on logical
partition LPAR05);
2) dedicated management class and
3 diff retentions per DB can you have multiple Recovery Windows
per DB in RMAN? Unfortunately we need a 21Day, 90Day and yes 10YR (I
know - recover what?)
Regards,
Charles
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Hello Mehdi,
We are using TBMR 6.1.1 with WinPE under TSM Client 5.5.1 and TSM Server
5.5.1.1.
Do not mix with CBMR, because it is a little bit different.
It is very good and license cost is less than $1000.
See www.cristie.com for details.
Regards,
Grigori G. Solonovitch
Senior Technical
TBMR supports disaster recovery for Windows servers (XP/2000/2003/2008) by:
1) install TSM Client and configure backups with VSS;
2) install TBMR and create initial TBMR configuration (C:\TBMRCFG directory);
3) run initial full backup for Windows server;
4) daily incremental backup for server
We were using TBMR 5.3.2 successfully for quite long time.
We have upgraded to TBMR 6.1.1 recently.
TBMR is not working with TSM Client 6.1. New release for TSM Client 6.1 is
expected soon.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East
Yes, of course. It does not matter where TSM Server is. In our environment we
have TSM Server under AIX 5.3.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
Hi,
I have installed TSM Client 6.1 on a few Windows 2003 SP2 servers (32 and 64
bit) successfully. Clients are working fine.
If you have this problem during 1st start of client:
1) deinstall client;
2) reboot server;
3) install TSM Client again.
Regards,
Grigori G. Solonovitch
Senior Technical
Hello Everybody,
I am testing TSM 6.1 under AIX.
I have tried to enable de-duplication for primary disk pool:
tsm: BKMEupd stg daily_1 dedup=y
ANR2344E UPDATE STGPOOL: The DEDUPLICATE option is not valid for device class
DISK.
ANS8001I Return code 3.
tsm: BKME
I have been affected too much by
for
DEVTYPE=DISK.
Thanks,
Colin
-
Colin Dawson
TSM Server Development
col...@us.ibm.com
From: Grigori Solonovitch g.solonovi...@bkme.com
To: ADSM-L@VM.MARIST.EDU
Date: 04/29/2009 05:38 AM
Subject:[ADSM-L
Hello Everybody,
I am testing TSM 6.1 de-duplication in TSM Server 6.1 for AIX and TSM Client
6.1 for AIX.
After careful reading TSM Server Administration Guide, which is quite weak from
de-duplication point of view, I tried to test next scenario:
1. Environment preparation:
-
Hello madunix,
TSM supports next ways to backup open files in Windows (depends on OS version):
1) Open File Support (OFM);
2) Logical Volume Snapshot Agent (LVSA);
3) Volume Shadow Copy (VSS);
4) Tivoli Data Protection for databases (to perform online database backups for
Oracle, MS SQL,
I am trying to test de-duplication in TSM 6.1.
I have realized next things:
1) de-duplication is applicable to storage pool;
2) reclaim process for de-duplication is working on volume level (threshold is
for volume, not for storage pool).
In my opinion, this difference can create quite serious
You can safely ignore messages like this. It means only that file was removed
during backup and nothing else.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
I have query to TSM database which is working fine with TSM 5.5, but gives an
error in TSM 6.1:
tsm: BKMEselect volume_name,state,location,upd_date from drmedia where
volume_name like 'TSM%' and voltype = 'DBBackup' order by volume_name
ANR2944E The reference 'ORDER' is an unknown SQL scalar
Thank you very much.
Is this problem fixed in TSM 6.1.1?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the
schedmode prompted in dsm.opt
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the environment before printing this
Hello Everybody,
I have downloaded TSM 6.1.1 for AIX.
Link for installation guide AIX, Linux and UNIX from README.html gives:
The page you requested cannot be displayed.
There is 500 Internal Server Error for
http://www-01.ibm.com/support/docview.wss?uid=swg27015510
Could somebody help me to
installation guide
On May 17, 2009, at 2:18 AM, Grigori Solonovitch wrote:
...
Link for installation guide AIX, Linux and UNIX from README.html
gives:
The page you requested cannot be displayed.
There is 500 Internal Server Error for http://www-01.ibm.com/
support/docview.wss?uid=swg27015510
Hello David,
I am running TSM 5.5.1.1 with xlC 9.0 without any problems.
In addition, I have upgraded to xlC 9.0.08, which is required for TSM 6.1, and
found 5.5.1 working fine.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East
Hello Martin,
It is possible you are running backups to default management class (for
example, to backuppool), which has no volumes defined. I think, you need to
check type of backup data and Include/Exclude list carefully.
Regards,
Grigori G. Solonovitch
Senior Technical Architect
Maybe this is simple hardware problem - volume sensor in slot is damaged?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please
sensor in slot in a 3583?
-H.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: 27. mai 2009 11:45
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Preventing TSM from using a certain library port
Maybe this is simple
I think you need:
1) define dedicated management class for SYSTEMSTATE like MYSYS;
2) define copy group for MYSYS with required VERE;
3) add INCLUDE.SYSTEMSTATE MYSYS in appropriate place of dsm.opt.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and
You are completely right. It is much more difficult to install TSM 6.1 in
comparison with any previous version. Upgrade is going to be very painful and
long as well.
I have installed TSM 6.1 under AIX 5.3 - it is very unstable.
I have upgraded to TSM 6.1.1 - it looks a little bit better.
I am
been
promised to address a problem that was possibly introduced in 6.1.1.
I agree - way too unstable for production. Watch out for the hidden
storage/disk requirements plus the need for 3-FULL DB backups before it
purges archived transaction logs!
From:
Grigori Solonovitch g.solonovi...@bkme.com
TDP for Exchange is performing backup/restore for storage groups or databases.
To restore mailbox or individual message you have to use restore database to
recovery storage group and then use Exchange to move mailbox from RSG to
original database.
I think this is definitely supported by TDPE 5.5
I am using RMAN 9i/10g with TSM 5.5 successfully.
RMAN manages data expiry for Oracle databases completely without any manual
intervention, but some configuration efforts are required:
1) dedicated TSM node for Oracle data with management class and copy group;
2) set vere=no limit, verd=0 rete=N
I agreed completely with that .. I have tried to use ISC a few times
with no success.
I was using TSM WEB Interface 5.2, which was announced by IBM as a temporary
solution for TSM 5.3, with TSM 5.4 and TSM 5.5 successfully. I addition, I am
using command line interface dsmadmc.
I wonder,
@VM.MARIST.EDU
I understand that rman CAN automatically delete old backups. As a TSM
Admin, I am being asked to verify that rman IS deleting old backups. Is
there any way to verify such from the TSM side?
David
Grigori Solonovitch g.solonovi...@bkme.com 6/4/2009 1:42 AM
I am using RMAN 9i/10g with TSM
To restore single datafile (no database recovery):
---
#!/bin/sh
#
# Restore datafile for specified database
#
# Input parameters:
# 1 - database SID;
# 2 - datafile name.
#
export ORACLE_SID=$1
export ORACLE_HOME=`grep $1:
Please check space and write permissions in the directory with TSM Client log
files (DSM_LOG).
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On Behalf Of John
Underdown [johnunderd...@synovus.com]
Sent: Sunday, June 28, 2009 4:13 PM
To:
We have TSM 5.5.1.1 under AIX 5.3-09-02.
I would like to upgrade TSM to 5.5.3.0.
Are there any issues with this version? Is there somebody working with 5.5.3
under AIX?
I will deeply appreciate any comments or suggestions.
Thank you very much in advance.
Grigori G. Solonovitch
Senior Technical
Dear TSMers,
We have TSM 5.5.1.1 under AIX 5.3.
I need to move data from DISK primary storage pool (raw logical volumes) to
FILE primary storage pool (JFS2 file system).
There are 3 tape copy pools for DISK primary pool.
I am going to use next procedure:
1) create FILE primary storage pool with
In my opinion, the best software for disaster recovery of Windows servers is
TBMR from Cristie TSM Client from IBM. It allows to make full/incremental
backups for SYSTEMSTATE, drive C: and other drives top TSM Server (with
point-in-time disaster recovery). We were using a few versions and now
I am using TSM 5.5.1 and PowerHA 5.5.0.2 (HACMP 5.5.0.2) without any visible
problems under AIX 5.3-09-02.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
Hello Tim,
I am using next script to restore database with incomplete recovery:
===
#!/bin/sh
#
# Restore specified database to point in time
# Recover database to specified time (incomplete recovery)
#
# Input paramaters:
# 1 -
Grigori
Solonovitch [g.solonovi...@bkme.com]
Skickat: den 28 juli 2009 12:35
Till: ADSM-L@VM.MARIST.EDU
Ämne: Move data from DISK pool to FILE pool
Dear TSMers,
We have TSM 5.5.1.1 under AIX 5.3.
I need to move data from DISK primary storage pool (raw logical volumes) to
FILE primary storage pool
...@cat.com
Grigori Solonovitch g.solonovi...@bkme.com
Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
29/07/2009 06:37
Please respond to
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: [ADSM-L] Move data from DISK pool to FILE pool
Caterpillar
Unfortunately, I have no links to documentation. I have upgraded HACMP a few
months ago without checking TSM compatibility.
Why you are not asking IBM straight way?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
: 331817
+ Email: steven.langd...@cat.com
Grigori Solonovitch g.solonovi...@bkme.com
Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
29/07/2009 08:40
Please respond to
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: [ADSM-L] Move data from DISK pool
Hello Mehdi,
There is no straight way migration from TSM 5.5 to TSM 6.1. During migration
main steps are:
1) install migration tool in TSM 5.5;
2) export database from TSM 5.5 by using migration tool;
3) create new TSM 6.1 instance;
4) import database into TSM 6.1.
Procedure is not easy and time
It is included with TSM 6.1.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the environment before printing this
I think your problem has no relationship with cash ratio:
The database utilization is too high. 85.4 85 Consider a database space
trigger or increase the size of the database.
Just increase database size to have less than 85.
Cash ratio has to be as high as possible.
Grigori G. Solonovitch
Dear TSMAdmins,
We have TSM 5.5.3.0 under AIX 5.3-09-02.
Suddenly I have faced problem moving node data from DISK primary storage pool
to FILE storage pool on the same server:
1) it is impossible to use MOVE DATA, because it is working with volume
level and each DISK volume contains data of
everything , didn't you need to move a specific
node only ??
Regards
Robert Ouzen
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Sunday, August 09, 2009 12:55 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Move node
Technology Services
*410-580-7032
btchu...@leggmason.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Sunday, August 09, 2009 5:55 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Move node data from DISK primary storage
...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Monday, August 10, 2009 8:56 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Move node data from DISK primary storage pool to
FILE storage pool
Hello Bertaut,
FILE storage pool is a primary storage pool, not a copy storage pool.
MOVE DATA
Please check access level for user, which is used in GUI user/password by:
q user user ID f=d
This user should have Client Access Privilege on current host or System
Privilege.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East
, 2009 1:48 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] NetApp restore 'This node cannot be selected'
Thanks for responding Grigori,
Indeed - the admin ID has full system privileges.
Anything else I can check?
On Wed, Aug 12, 2009 at 11:22 AM, Grigori Solonovitch
g.solonovi...@bkme.com
, Grigori Solonovitch
g.solonovi...@bkme.com wrote:
If you are accessing local node, I have no more ideas. But, if you are
trying to access another nodes, you need to grant access by set access ...
command from source node in dsmc.
Grigori G. Solonovitch
Senior Technical Architect
You need to put option file on disk used by Exchange server data (the same
resource group). In this case, option file will be moved by cluster together
with schedule service to another node. Of course, you need to specify new
location of option file in backup and restore scripts.
Grigori G.
Thank you very much for information.
I have upgraded our test server from TSM 6.1.1 to TSM 6.1.2 successfully.
I have created scripts by scripts.smp as well.
I do not think that everything is fine in 6.1.2.
I couldn't explain next error message:
Hello Nicholas,
I have upgraded it straight way:
1) stop TSM Server;
2) run installation from 6.1.2;
3) start TSM Server.
Everything is looking fine after upgrade.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Dear TSMAdmins,
I have faced next problem in TSM Server 5.5.3 under AIX 5.3:
tsm: BKMEquery nodegroup LPAR07_GROUP f=d
Node Group Name Node Group DescriptionLast Update by Last Update
Node Group Member(s)
:
LPAR07_GROUP is not a collocggroup. It is a nodegroup.
To view the Collocation group, run q COLLOCGROUP
On Wed, Aug 26, 2009 at 6:51 AM, Grigori Solonovitch g.solonovi...@bkme.com
wrote:
Dear TSMAdmins,
I have faced next problem in TSM Server 5.5.3 under AIX 5.3:
tsm: BKMEquery LPAR07_GROUP f
Hello Stefan,
I do not think you can use client compression and de-duplication together.
De-duplication is skipping all data compressed by TSM Client or TSM Server.
By the way, de-duplication process is trying to reduce files, compressed by
operating system (for example, *.Z, *.zip, AIX system
The Computer Coaching Community, LLC
Office: (314) 635-5424 / Toll Free: (866) 796-9226
Cell: (314) 750-8721
Original Message
Subject: Re: [ADSM-L] Seeking wisdom on dedupe..filepool file size
client compression and reclaims
From: Grigori Solonovitch g.solonovi...@bkme.com
Date
Wolfgang wrote:
Now my long term averages are in: for the interesting (V5.5) TSM servers
around here, the Log Consumption ranges from 5000 to 9000 MB/day.
So, does this tell me anything about future (V6) Log Space requirements?
I have test database 6.1.2 and I think:
1) you need additional space
/archtranslogs are purged/reset. I too ran into the log
overflow/blew out 300GB of archtranslog space/filesystem and had to move
it to a 1TB disk to hopefully prevent this from happening again, as well
as performing 3-daily FULL DB backups.
From:
Grigori Solonovitch g.solonovi...@bkme.com
To:
ADSM-L
I think you need to stop and remove TSM services before removing directory.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please
Please try to add next lines in opt file
TDPO_TRACE_FLAGS ORCLEVEL0
TDPO_TRACE_FILE /usr/tivoli/tsm/client/oracle/bin64/tdpo.trc
to have trace file. It is better to touch trace file before backup and check
write permissions for Oracle HOME owner.
Grigori G. Solonovitch
Senior Technical
I think you just need to start TDP for Mail on other server. Number of licenses
will be increase on TSM Server. Maybe I am wrong, but this is only for audit.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone:
Dear TSM Admins,
I have found one a little bit strange thing. I have Windows 2003 servers in
each branch with the same hardware and software.
We are using TSM Client to backup these servers for a long time. With TSM
Client 5.5.1 we have approximately the same status for all the branches.
We have
Cell: +46-70-325 1577
E-mail: christian.svens...@cristie.se
Skype: cristie.christian.svensson
Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] f#246;r Grigori
Solonovitch [g.solonovi...@bkme.com]
Skickat: den 27 september 2009 08:18
Till: ADSM-L
1577
E-mail: christian.svens...@cristie.se
Skype: cristie.christian.svensson
Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] f#246;r Grigori
Solonovitch [g.solonovi...@bkme.com]
Skickat: den 27 september 2009 08:18
Till: ADSM-L@VM.MARIST.EDU
Ämne
You need to run at least 2 full backups to clean the both log and arc
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider
Hello TSMAdmins,
I have reported problem to IBM.
This is a result of partial investigation:
...
--
Env.: Windows 2003 servers - upgrade from 5.5.1 to 6.1.0
--
Prb.:
After upgrade from 5.5.1 to 6.1.0 systemstate backup is
Hello Everybody,
I have small problem, but I couldn't resolve it myself.
There is batch file to backup one of the Windows servers. From command line on
the server I am able to run batch as:
C:\Inetpub\ftproot\BKME KOC FTP\Usr\root\CBMR\scripts\Daily.bat
C:\Inetpub\ftproot\BKME KOC
Command fails in CMD mode, if I put
C:\..
It is not working from scheduler as well.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274
: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Tuesday, October 06, 2009 5:17 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Objects for schedule COMMAND for Windows
Hello Everybody,
I have small problem, but I couldn't resolve it myself
\logs\tsm_daily.log
This is what we do with our SQL TDP scipts and it will keep you from
having to deal with double quotes.
See Ya'
Howard
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
Of Grigori Solonovitch
Sent: Tuesday, October 06, 2009 8
Of course, you need MPIO for fiber optics tape drives. It is not only high
availability. It is better performance as well.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965)
Hello Everybody,
I have TSM Server 5.5.3.0 under AIX 5.3.
select * from options gives:
OPTION_NAME: DateFormat
OPTION_VALUE: ?
OPTION_NAME: TimeFormat
OPTION_VALUE: ?
OPTION_NAME: NumberFormat
OPTION_VALUE: ?
I have in dsmserv.opt file:
DATEformat 1
TIMEformat 1
NUMberformat 1
I do not
Have you tried to search in Internet?
For example:
http://www-01.ibm.com/support/docview.wss?rs=663context=SSGSG7uid=swg21392122loc=en_UScs=UTF-8lang=en
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
specifications since TSM 3.7, when such controls were transferred to
locale settings.
The Options table may evidence the options, though not even coded in
your server options file, apparently by virtue of some legacy server
software.
Richard Sims
On Oct 12, 2009, at 1:33 AM, Grigori Solonovitch
Hello Remco,
It is very interesting discussion.
I would like to mention next facts:
1) dsmserv.opt for TSM 5.5.3 and TSM 6.1.2 (AIX 5.3) contains
DATEFORMAT ( available on z/OS only )
...
TIMEFORMAT ( available on z/OS only )
...
NUMBERFORMAT ( available on z/OS only )
2) command SETOPT does
* LANGuage
*
* Specifies the language to use for help and error messages.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please
Try q act se=Process ID begind=date begint=time
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the environment before
Yes, I am still use DIRMC to prevent holding directories in management class
with the biggest expiry period in domain. Do you have any information about IBM
plans for DIRMC?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East
I am not very cool in SQL and I need help.
I have query like select distict a,b from c group by a,b
Response on this SQL query in TSM Server is:
A1 B1
A1 B2
A2 B3
A2 B4
A2 B5
I would like to have:
A1 B1
B2
A2 B3
B4
B5
I know exactly it is possible in Oracle SQL*Plus.
Is it possible
I attended an introductory 5-day SQL*Plus course where we
were told that usage of 'distinct' is discouraged, use 'group' by
instead.
My 5¢.
--
Warm regards,
Michael Green
On Thu, Oct 15, 2009 at 2:49 PM, Grigori Solonovitch
g.solonovi...@bkme.com wrote:
I am not very cool in SQL and I need help
The same me, but
http://ftp.software.ibm.com/storage/tivoli-storage-management/patches/client/v5r5/Windows/x64/v552/5.5.2.1-TIV-TSMBAC-README_enu.htm
is working fine.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East
We are running VSS based backups (SYSTEMSTATE, etc). Quite often there are VSS
problems during backups. We are installing VSS patches, but VSS is still a
source of problems.
TSM Client gives normal completion in this case and event is mensioned as
successfull. I have found only one way to
is going on. All the
views on the tsm db are there. I haven't looked for a tool which does
outlining but I am sure there is one.
Bill Colwell
Draper Lab.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent
Hello Sam,
Have you tried to use something much more simple and useful for TSM
administration? For example, TSMExplorer from www.s-iberia.com. Spend a few
minutes to downolad and install demo version, try and enjoy easy life.
Look also for TSMManager, if you do not like TSMExplorer.
Grigori
Hello Gary,
You can use TSM backups for the both active/passive and active Windows
clusters. We are using a few Windows 2003 clusters.
In general, you need:
1) configure sepatate TSM nodes for each server in cluster to backup
not-clustered drives (usually C: and, sometimes, D:) with original
Hello Robert,
You need to create dedicated TSM Scheduler for Node_Cluster using
/media/nss/APPS/tivoli/cluster.opt with clusternode yes and put TSM Scheduler
service into the same resource group.
MS Cluster will start/stop TSM Scheduler during failover operation (stop on
inactive node and
I am not sure it is right or not, but we have journaling only for local drives
C: and D: in our Windows 2003 clusters. All drives from resource groups we are
backing up without journaling. TSM Client is able to check more than 400,000
files in 5 minutes. This time is acceptable for us, but I
Normally you can start this process as root by (this is an example):
[LPAR08][/]tdposync syncdb -tdpo_optfile=/home/oracle/admin/tdpo/pbob.opt
IBM Tivoli Storage Manager for Databases:
Data Protection for Oracle
Version 5, Release 5, Level 2.0
(C) Copyright IBM Corporation 1997, 2009. All
Hello,
I need somebody's comments on next result of select query:
Session established with server BKME: AIX-RS/6000
Server Version 5, Release 5, Level 3.0
Server date/time: 11/03/2009 10:16:16 Last access: 11/03/2009 10:13:43
ANS8000I Server command: 'select sum(bytes) as sumbytes,
Have yuo tried to use TSM Client 6.1.2 for Windows (just anonced)? There is
quite serious improvement for SYSTEMSTATE.
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On Behalf Of Ben Bullock
[bbull...@bcidaho.com]
Sent: Thursday, November 05, 2009
I agree, that restoring SYSTEMSTATE is very exotic action, but it cab be used
anyway for some cases.
Usually SYSTEMSTATE backups are used for disaster recovery of Windows server.
In this case, you need TSM backups and TBMR software from Cristie.
Im my opinion, it is perfect software and we are
What do you mean saing full backup?
If you check dsmc query systemstate -inactive -detail, you will see that all
backups are full. But full has relationship with VSS writes in Windows and it
has no relationship with TSM full/incremental terms. If you will check sizes in
the same report for new
You can query this data from table VOLUMEUSAGE.
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On Behalf Of William ZHANG
[william.zh...@st.com]
Sent: Friday, November 06, 2009 8:02 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TSM 5.3.4 How can I
I never reported it, but after downooad TSM files from IBM sites for AIX (the
both are products of IBM) I often see unbelivable file extentions like *.bin
(it is not clear what to do at all with this file in terms of AIX) or
*.tar.tar instead of *.tar.Z (see big difference). It looks strange,
What is the effect of compression on de-duplication? Does it help to reach a
more de-duplication level?
This is my opinion (please correct, if something is wrong):
1) note we are talking about client compression (compression=yes for node or in
dsm.opt). Hardware compression on drive level is
You can use:
1) run ESTIMATE DBREORGSTATS wait=yes
If it gives quite big reduction for database reorganization:
- unload DB to tape by dsmserv UNLOADDB;
- re-format existing DB by dsmserv LOADFORMAT;
- load DB back by dsmserv LOADDB;
- audit reorganized DB by dsmserv AUDITDB
I have upgraded under AIX TSM 6.1.0 to 6.1.1 and than to 6.1.2 straight way
(stop, upgrade, start) without any problems.
I am going to upgrade 6.1.2 to 6.1.2.1 tomorrow.
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On Behalf Of Stefan
Holzwarth
It looks you have problem with backup destination (default is used).
Have you configured Include/Exclude list for Oracle backups at client side?
Management class and copy group at TSM Server site?
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On
Hello Zoltan,
We have started upgrade process from 6.1.0.2 to 6.1.2.0. 5 or 6 servers
Win2003R2 have been upgraded already.
We faced similar problem on one of them. I have fixed it by: de-install client
-- reboot server -- install client -- reboot server -- configure client
services by setup
1 - 100 of 464 matches
Mail list logo