Had this happen again yesterday.
server 4.2.1
platform solaris 8
storage 3590-b drives in ibm 3494 library.
Issued the restore volume with wait=yes and preview=yes
Captured activity log, but when I did the restoer, it called for two other volumes. I
really don't think I missed it.
Anyone
TSM v4.2.1, sun 3500, solaris 2.8, 2gb memory, 288gb disk.
Currently have a database of approximately 6.5gb at 77% utilization. Dbbufsize is
currently set at 192mb. Cash hit starts out very good at 99-99.5% but creeps downward
throughout a weeks run to around 97%.
I have looked in the admin
Currently running tsm 4.2.1 on solaris 8. Have approx 6gb database split into two
volumes, each mirrored.
Using standard filesystem based volumes. a few questions.
1. Is the performance increase worth the time and hastle to convert to raw volumes?
2. Can I mix and match? i.e. create a temp
Just checked the ftp site, and 4.2.3.0 is the latest I can find. Any idea on when
this 4.2.3.2 will be made available for us sun users?
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
We have tsm server 4.2.1 running under solaris 2.8 on a sun 3500.
Had plenty of memory (2gb) and a reasonable amount of disk. However, performance even
with a gigabit ethernet was less than adequate.
Acting on a couple of replies received from this list, I modified the vfstab and
changed the
Here, if expiration does not finish, next expire picks up where the last one left off.
Tsm v4.2.0 solaris 2.8.
Hope this helps.
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
Looks like you have hit a 4gb limit. I forget the parm, but if you are using newfs or
mkfs to create database volumes, there is largefiles (I think) which allows file
sizes above 4gb.
Using solaris 8 here, and have two db volumes of 6gb each. Works fine.
Hope this helps.
We just got hit with the possibility of using this product to back up a 14 tb netapps
server.
I am interested in anyone's experience with tdp for ndmp. Our current configuration
is
tsm v4..2.1 (soon to be at least 5.1.5)
Solaris v2.8
SUN e3500 4 cpu with 4gb memory
1 67gb disk pool
8 3590e
Works fine. I did move my entire stgpool from 3480 to 3590 tapes two years ago. The
operators love me now. We are using a 3494, and they no longer run their legs off.
We are getting ready to upgrade as specified above. However, I am only a bit
confused. I have done three upgrades under os/390, but this looks a little different.
First and biggest question is Can I do it in one shot, or do I need to install v5.1.0
or some other version first?
Any other got
Is there a way to accomplish this?
What I want to do is mail today's prepare file after the prepare is complete. Figured
to use mailx for this.
Tsm v5.6.2 on solaris v2.8.
A sample, or just a pointer to which manual and which section is fine.
I'm hoping I just overlooked it.
Thanks for the
Working on a script to look at all my tsm nodes.
In the command-line admin client, q node * f=d produces a more lenier vertical
listing.
However, when run from a shell script, a very tabular listing is produced.
Is there anyw way to get the vertical lysting to be produced?
Still lookin gin
I would use the suggestion of redirecting the destination of your storage pools to the
new devclass for 3592s.
Another option is to create the new pools as orvile sugested, directing all new data
there.
Also, at this point change the reclaim stgpool for your old 9840 pools to the new
pool.
Tsm server v5.1.9
Os solaris v2.8
I have a single raw log volume, but would like to add another. Partitions show up
using format, also all permissions look the same for the one being used,
(/dev/rdsk/c0t1d0s0) and new one, (/dev/rdsk/c0t1d0s1).
I get the message
Anr2404e volume
How about setting reclamation to 0, with the reclaim pool set to the new pool.
Will take some time, but works like a champ.
If you don't mind waiting a while, just set the reclaim stgpool to the new
pool, and let natural reclamation take its course.
Gary Lee
Senior System Programmer
Ball
Why not just archive the data to management class with retver set to nolimit?
Seems a whole lot easier.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Steve
Schaub
Sent: Tuesday, March
I remember seeing a message on this, but can't remember specifics.
Need a means by which to stop any script that is running, such as daily
maintenance processing.
Thanks for the help.
Gary Lee
Senior System Programmer
Ball State University
--
No virus found in this outgoing message.
Checked
Tsm windows client v5.2
Windows xp
Server v5.1.9
Server os solaris v2.8
Someone appears to have changed the client machine name without anyones
knowledge.
Now the client needs to restore some files due to disk crash.
In the following extract from a q filespace elixir * f=d command, we wish to
Solaris 2.8, Sun e3500, connected to 3494 library.
Just upgraded to tsm v5.2.0, ran fine. Applied v5.2.4.0 maintenance, and got
the following error at server startup. Any ideas?
Starting the ITSM Server
ld.so.1: ./dsmserv: fatal: libCstd.so.1: open failed: No such file or directory
Yes. I use it in my maintenance scripts. Works well.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Joni Moyer
Sent: Monday, April 18, 2005 8:59 AM
To: ADSM-L@VM.MARIST.EDU
Subject:
description on
their side.
Richard Sims
On Apr 18, 2005, at 9:37 AM, Lee, Gary D. wrote:
Solaris 2.8, Sun e3500, connected to 3494 library.
Just upgraded to tsm v5.2.0, ran fine. Applied v5.2.4.0 maintenance,
and got the following error at server startup. Any ideas?
Starting the ITSM
Just downloaded the v5.2.2 docs for sun solaris.
However, when I bring them into adobe acrobat 7.0a, I get one word per line.
I am totally blind, and this is how acrobat presents the text to the screen
reader.
Please, any tivoli folk out there, this makes ift very hard to keep using your
I was running maintenance manually yesterday, and accidentally backed up the
archives tape pool to the wrong offsite pool.
I discovered this shortly thereafter and canceled the process.
However, how do I get rid of those archive files backed up in the wrong pool?
In other words, how to delete
I'm guessing that this is your most recent db backup.
If that is the case, you can't delete it. If you really must, then do
another db backup then you will be able to delete.
Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310
-Original Message-
From: ADSM:
Configuration as follows
Tsm server v5.3.4 running on suse sles9 64 bit under vm 5.1
I have a macro defined to create a device class for 3592 cartridges,
define the library, drives, and paths to talk to the 3494 with two 3592
drives.
IBMatl, and IBMtape are both installed, mtlib works, I have
Mr. Harris nailed it. Adding the commit just before the define path for
the drive solved the problem. Must be a timing thing.
Now back to testing.
Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310
Is there a way outside of tsm to read the volume label on a 3592
cartrige?
Not the paper external label, but the one supposedly written to the tape
itself.
Got a bunch of new 3592s supposedly prelabeled.
However when try to check them in with search=yes, I get an anr8472
message.
Thanks for any
We are setting up an ondemand server. This will use tsm as its primary
storage.
From what I can glean from the ondemand manuals, it uses an api client
to manage its storage.
How do I set retention parms in the copygroup for this.
The ondeman system uses time only as a determiner of valid data.
Server v5.2.10.0
Os solaris 8
Library ibm 3494
When doing a
Move drm wherest=mo s=dbs tost=vault remove=no
Cartridges are ejected anyway, even when the docs say they should only
be changed to category inserted.
Or, am I missreading the table?
Thanks for any help you can give.
Gary Lee
Thanks Richard. This is unfortunate. I was trying to control the
ejection behavior so as to eject the volumes in numerical order for our
operations staff.
Well, they'll just have to deal with it.
Thanks again.
Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310
For Dave:
Try using the virtualmountpoint.
This allows just what you want. It telss tsm to treat the specified
directory tree as if it were a real mountpoint.
Good luck.
Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310
-Original Message-
From: ADSM: Dist
place {} around the filesystem. This denotes the filespace in which tsm
will look.
example:
files in /usr/local/bin/newapp.
filesystem actually is /usr/local
you would specify,
{/usr/local}/bin/newapp
hope that is clear as mud.
Gary Lee
Senior System Programmer
Ball State University
ok, I give. I've been all over the tivoli support pages, where do you
download clients?
I see all kinds of sales stuff, but clidking what appear to be download
related links leads me in circles.
RANT ON.
Please, ibm folks, make your pages less complex and markety.
RANT OFF.
Gary Lee
Senior
What parm determines the amount of time tsm will wait for a tape to be
inserted into a library when being returned from offsite?
I just went brain dead, and cam't come up with it.
Thanks for the help.
Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310
I have a shell script which does a query on the events table.
Suddenly, I now get the question
this may take a while to computer, do you want to continue?
Or something like that.
Is there a way to avoid this question when running batch scripts?
I am recently returned from surgery, and don't have
Thanks to Richard and Nick for the answer.
I'd forgotten about -noc.
As for downloading manuals, slow connection here, so not a good option.
Will copy them when I get back to work.
Thanks again.
Tsm client v5.4.2, server v5.2.10.
Our pc support folks replaced the c: drive on an xp machine. This meant a
reinstalation of windows xp.
Then they installed the tsm client v5.4.2.
I watched them go through the scheduler setup, and all looked ok.
Now when the time comes for this node's
Tsm client v5.4.2, server v5.2.9.10.
Client windows xp, server solaris 8.
Problem is, scheduled backups being missed, and no log generated on the client.
I think I found the problem.
On the suggestion of a list member I ran dsmcutil list.
On my machine, windows xp, client 5.4.2, I have two
I have the follwowing scenario.
Tsm v5.6.2 server running on solaris 8.
1 disk pool 67gb
Tape pools residing on 3590 carts for onsite and offsite. There are separate tape
pools for archives and backups.
I have no more disk. Is there a way to allow archives and backups to share the same
disk
TSM server v5.1.6.2 on solaris 8.
Ibm 3494 library ethernet attached, with four 3590 drives dual scsi attached.
Have a mountlimit of four in the devclass definition, and all four drives show on-line.
However, I have processes waiting for multiple mountpoints, and only two drives in
use;
Solaris client v5.2 running under solaris 2.8.
Tsm server v5.1.6.2 on solaris 2.8 (same physical machine).
Files in the /opt filesystem are being skipped even though they are cliarly modified
since last backup.
Below is a file composed of screen dumps showing the output of ls -l to show
Have a devclass 3590 with mountlimit=4. However, when doing migration, I never see
more than three drives in use. Even though I seem to have available mountpoints,
always there is at least one process waiting for mountpoint.
I do a q mount and never shows all four in use.
TSM v5.1.6.2 on
Thanks all. Q path did it. Haven't got used to paths yet.
Next time, just hit me with a 2 by 4.
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version:
Anyone out there used ibm's incarnation of linux on a z800 processor or similar?
We are moving from os/390 v2.10 to zos v3.4 which necessitates a new processor.
While we are at it, contemplating moving tsm from solaris 2.8 back to the mainframe
platform under linux.
Therefore, I am looking for
Tsm server v5.1.6.2, running on Sun e3500 under solaris 2.8.
Library is ibm 3494 ethernet ethernet connected.
Drives are four 3590b.
Many times this week during offsite reclamation, the process will end with the message
anr8447e no drives are available in library atoz.
Checking the activity
My thinking is ALWAYS have a second copy. Have had a rash of bad tapes over the past
year. Thanks to the offsite storage pool, I have only lost two files in six years of
using adsm/tsm for approximately 100 clients. One of those lost files occurred before
I had the resources to have an
Trying to delete some unused filespaces from a windows nt client.
Tried del filespace anonymouse \\cont_ed\apps
Says no matching filespaces found.
However, below find a cutting from a q filespace that says it is there.
Need some help please.
Node Name: ANONYMOUSE
Filespace
Andy nailed it.
Thank you very much. This is the perfect kind of help. Just point me to the correct
manual section. I looked at it, but overlooked it.
Don't think you can do a move nodedata for a copy pool. Must be done on a primary
pool.
Had this problem recently with a windows 2000box running client v5.1.6, talking to a
server solaris 2.8 v5.1.6.2.
Somehow the wrong tcp/ip address got associated with the client.
Filled in the tcp/ip address and got it resolved.
I'll try and dig up the diagnosis messages from support. Involved
Sounds like it would work, however, why not set the reclaim stgpool to a pool of the
new type K tapes. Then just set the reclamation on your copypool to 0, and watch the
fun.
Thomas:
Just checked my client install. Solaris client v5.2.0.
Same thing, dsm.opt and dsm.sys link to /usr/bin/ respective names.
Don't know why that choice was made.
Two choices that I know of.
1. SQL backtrack
2. Dump the database to a flat file immediately before backup.
#2 is the strategy we use. Don't have to buy another product, and easy to manage.
Tsm server v5.1.6.2 on solaris 2.8. Have a magstar 3494 with approximately 1500 slots.
I would like to be able to count how many tapes we are using in onsite pools, offsite
pools, db backups, and scratches.
Got the on and offsite count easily enough. I also have a script for counting
When I moved from 3480 to 3590 in a magstar I preceded as follows:
Create new devclass pointing to new library and drives
Create new storage pool using new devclass
Point all management classes to use the new storage pool
Finally, update the old storage pool's reclaimstorage pool to point to
Sun e3500 server running solaris 2.8, tsm server v5.1.6.2.
I have just installed a dds4 drive on this machine.
Using the Solaris st driver, I can successfully use tar, and mt with this drive.
I would like to use it for creating backup sets, but also have the use of it with tar,
ufsdump etc.
Working on tweeking my management classes.
I have one in each domain called dirsonly for the obvious purpose.
However, Wondering about the retextra, verexists, and verdeleted parms.
On first thought I believe I should only need to keep one or two versions of a
directory, since its only function
Marcel:
Give this a try. It is how we move our tapes back from the vault.
The cmdf parm denotes the filename in which to store the macro, then the macro command
executes it.
This, of course, assumes you have drm.
Hope this helps.
- cut here --
MOVE DRM *
The observation regarding reclamation of offsite tapes in which are parcially full has
caused me to handle offsite volumes as follows.
Keep the reclaim value set at 100%. Check every few days for number of tapes
reclamable at around 90%. When this reaches the point at which I can reclaim 20 to
I need a way to estimate the size of a storage pool backup.
Looked through the database specs, but just don't see it.
Any help is appreciated. A pointer to a manual section is fine.
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
Trying to create a select to give me the contact info for all nodes whose schedules
did not complete the previous night.
Figured to join the events and nodes tables. A screen dump from the admin client
where I am experimenting follows.
Any help appreciated.
tsm: SPOCK-S1select events.node_name
I agree that a cloptset editor would be nice, but would also be unusable (just like
the web admin gui) by anyone who is blind using screen access software. No screen
reader I am aware of plays nice with java.
A solution I use for server scripts is to create a file with all the define commands I
Hope I am not working from an incorrect premise.
We have a client which is disappearing. I would like to do an incremental to set
everything to inactive so it will age off gracefully.
However, when I gried this yesterday it went ahead and backed up enyway.
Tsm server v5.1.6.2 on solaris 2.8.
Tsm server v5.1.6.2 on solaris 2.8
Client 3.1.7 on solaris 2.6
Attached through a 100mb ethernet interface.
It appears that tsm is getting 104 mb network throughput.
The admin for the client machine (who is also our main tcp/pi routing guy) asks how
this is possible?
Note that compression is
Tsm server v5.1.6.2 on solaris 2.8.
Client v5.2on windows 2000.
Wea are attempting to back up several snap servers set up as nt shares. Each is added
to the domain statement using its unc path.
All works well until the last one is added, Number 15 according to their admin.
This brings two
Client v5.2.1 os win2000, server v5.1.9.0 on solaris 2.8.
Help out there. Below is the error message I am recieving, as well as
the client option definition. Can't seem to get this file excluded.
THanks for the help, message and definitions follow.
ANE4987E (Session: 887, Node: ARTHUR)
Tsm server v5.1.9.0
Solaris v2.8
Ibm 3494 with 4 3590-b1a drives.
Almost daily, random volumes will be changed to access = unavailable.
When a q vol f=d is done, it is not in error state, and once I do an update vol back
to access=readw, all goes well.
So far, I have detected no pattern in
First, I would go back through the log during the restore process and see why files
couldn't be restored.
I have had to do the restore twice sometimes. For some reason, the first preview=yes
doesn't call for all the offsite volumes it needs.
Hope this helps.
Gary Lee
Senior Operating Systems
tsm v3.7,
os/390 v2.8
I am trying to execute the admin client in a batch job to run various
scripts for reporting and creation of a pull list and return list to/from
our tape vaults.
I have loked through the admin guide, admin reference and quick start but no
joy. Anyone out there got a piece
Thanks to all who responded. Got my problems solved.
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
My hierarchy consists of two disk pools, both of which migrate to a single
3590 tape pool. My questions are as follows:
1. If I backup the disk pools, then after some time they migrate and I
backup the tape pools, how are the migrated files handled? i.e. are they
backed up twice?
2. Based on
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
Tsm server 3.7 on os/390,
client v4.1 windows nt.
I have a need to prevent the backup of large "rendered" video files. I
know that the best way to do this is through an incl/excl list and not
back up the directories where these should be stored. However, this is
a student lab and the little
Anyone out there using tsm v3.7 or 4.1 on os/390 using rmm as the tape
manager? I would like to here your experiences, good or bad. Thanks.
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
Some time ago, someone (I think dwight cook) sent out a spreadsheet
detailing tsm and backup version handling. If anyone has this, could you
pass it along please?
Gary Lee
Senior Operating Systems Analyst
Ball State University
phone 765-285-1310
Simply do a move data for each volume.
If the destination stgpool is collocated, tsm takes care of it already.
Doing this very thing righ now. Works great.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL
I've been all over the web site, but it either isn't there, or I've just missed
it.
Looking for a tsm client for either redhat enterprise linux v4, or fedora core
4.
Is there such a beast, and if not, any plans for one soon?
Thanks for the help.
Gary Lee
Senior System Programmer
Ball State
Tsm server v5.2.7.2, running on solaris 2.8.
Client v5.2 and 5.3 running on linux86 kernel v2.4 and 2.6.
Getting the folllowing on many files.
05/29/06 20:02:07 fioScanDirEntry(): Object '/usr/lib/aspell/español'
contains unrecognized symbols for current locale, skipping...
05/29/06
That's what I have done in the past, rename, and start over.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Keith
Arbogast
Sent: Thursday, August 24, 2006 3:18 PM
To:
Why not just do a
Q assoc * *
That will give you every schedule and association.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
LeBlanc, Patricia
Sent: Thursday, September 28, 2006
I want to select only a subset of messages from the activity log table.
For instance,
Select datetime, msgno, message, nodename from actlog
Where messages in (4952 4954 4957)
Etc.
Just looking for some syntax help. Don't currently have a good sql
manual.
Tia for any help.
Gary Lee
Senior
I would suggest another approach to the problem.
Dsmc -id=xx -pa=xxx -dataonly query output
Where query is a file containing your sql text and output is where you
want the output to go.
I use this approach and consequently don't have to strip headers or
trailers.
Hope this helps.
Gary Lee
Sorry:
That's what I get for trying to do it from memory.
Here is the line I use in my scripts.
dsmadmc -dataonly=yes -server=server -id=admin -password=pw query
output
Hope this helps.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist
John:
Had a similar problem last year. It was fixed in version 5.1.7.2.
I would recommend an upgrade to 5.1.9, as this also fixes a security
exposure.
Good luck.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL
I seem to remember reading in an old tsm manual that there was a limit on the
number of incrementals before a full was forced.
It sticks in my mind that that number was twelve or thirteen.
If I get a chance, I'll look through my old docs and try to find the reference.
Gary Lee
Senior System
Tsm server 5.2.9.0, running on solaris 2.8.
I would like to restrict a tsm script from running between the hours of
4:00 and 9:00 aa.m..
I haven't figured out how to test the value of time in a script, and
branch on that test.
Any pointers would be helpful.
Gary Lee
Senior System Programmer
We are looking to move our tsm server v5.2.9.0 from solaris 2.8 to
z-linux.
I am not well versed in this world.
My understanding is that the 3592 drives will be connected via an ibm
2109 fiber switch to a 2319 fiber card in the z800 mainframe.
1. How do I get z-linux to see the fiber card and
I'm not a mac person, just the ex tsm admin. If anyone can help with
the below problem, I'd sure appreciate it.
We have a mac system on which the new client was installed earlier this
week. Specs:
Mac Pro with 2 x 2 Ghz Dual-Core Intel Xeon.
1 GB of RAM
Mac OS 10.4.8 installed
Tsm server
You can rename a node using the rename node command.
If you do this, then change the nodename option in your dsm.sys file,
all will be well.
I tested this yesterday using tsm v5.3 client to a v5.2.9 server both
solaris 2.8.
1. reg node gp3
2. set up node gp3 and back up a large directory tree.
Sir:
Depends on what you want to have available. I let my volume history
grow. This is because I occasionally need to know the history of a
particular tape cartridge.
After it goes back to scratch, tsm loses its error information. I can
use the volhist to see how many times it has cycled
I have client v5.3 installed. Running under windows xp sp2.
I would like to use the command-line admin client on two separate
servers. Tried adding -server=servername to the comand line of a
shortcut but no joy.
Is there a way to accomplish this, or will I have to go to a real
operating system
Thanks all. -tcps=servername solved the problem.
Gary Lee
Senior System Programmer
Ball State University
I must be blinder than usual today. Can't seem to find the ftp site for
downloading new microcode for the 3590 b drives.
Can anyone out there help please?
Thank you for your time and consideration.
Gary Lee
Senior System Programmer
Ball State University
--
No virus found in this
Thanks to the list, got my microcode.
Now to schedule this update.
Gary Lee
Senior System Programmer
Ball State University
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.2/29 - Release Date: 6/27/2005
This is an exploratory message just to reassure myself that I am thinking
correctly.
We have tsm server v5.2.4 running under solaris 8.
I would like to do a weekly reboot of the server, but during a time period of
no activity.
My logic is as follows:
Have an administrative schedule check for
Just looked at the volume history file again.
Redoing the disaster recovery plans for tsm.
Is there any reason to keep the STGNEW entries that build up in this file?
Been removing the STGDEL entries during daily processing.
Didn't see anything in the manuals about keeping this file from growing
Have tsm server 5.2.4.0 on solaris 8.
Client 5.2.0 on a windows 2000 machine.
All of a sudden, the backup starts, then times out after around 4 hours when
the 75 minute idle timeout has been reached.
This began November 15, but the user claims that nothing has changed on the
2000 machine.
How about defining a new pol, as the reclaim stgpool for the pool you sish to
copy.
Then, just set reclamation on your copy pool to zero, and let her rip.
Gary Lee
Senior System Programmer
Ball State University
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL
Tsm server 5.2.4, solaris 8.
We have an ibm 3494 library containing 4 3590-b drives.
We wish to convert to 3590-e.
Devclass is defined with format=drive.
Can I convert as follows:
1. mark all volumes in use read-only
2. allow scratches to be used as tsm sees fit.
3. do reclamation to move onto
Tsm server v5.2.7.0
Solaris 2.8
Tried doing reclamation on my onsite pool bigtape this morning.
All worked through yesterday, but this morning got message anr1086w
insufficient space in storage pool.
Below is a script of the last reclamation, with stgpool definition, scratch
counts and volume
1 - 100 of 288 matches
Mail list logo
