Re: [AFMUG] OT power company guy anchors

We just replaced a couple of Elite openers. A contractor cut a corner short and ripped one gate and the opener completely out of the ground. They had to be over 25 years old, but they'd been very reliable. The opener was beyond repair, and they don't make that

Re: [AFMUG] Force 300 Gripes

You mean CMBM? From: AF On Behalf Of Mike Hammett Sent: Wednesday, July 3, 2019 9:02 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Force 300 Gripes If only there were some Cambium-using WISPs in the area... - Mike Hammett Intelligent

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

The antenna model is A-ANT-11G-36-C-A Keefe On Wed, Jul 3, 2019, 8:52 PM Keefe John wrote: > These are the radiowaves ones. > > On Wed, Jul 3, 2019, 5:41 PM Chuck McCown wrote: > >> Good point. Has to be circular waveguide on the antenna. >> >> Sent from my iPhone >> >> On Jul 3, 2019, at

Re: [AFMUG] Force 300 Gripes

If only there were some Cambium-using WISPs in the area... - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Nate Burke" To: "Animal Farm" Sent: Wednesday, July 3, 2019 9:13:04 AM Subject:

Re: [AFMUG] OT power company guy anchors

Congrats. By the way, if you are happy with the gate opener you choose please post what you decided on. I have a couple of gate openers in my stroage complex that drive me crazy. On Wed, Jul 3, 2019 at 7:24 PM Chuck McCown wrote: > When I designed my shop, I was fitting it into an odd sized lot

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

These are the radiowaves ones. On Wed, Jul 3, 2019, 5:41 PM Chuck McCown wrote: > Good point. Has to be circular waveguide on the antenna. > > Sent from my iPhone > > On Jul 3, 2019, at 4:27 PM, Tim Hardy wrote: > > Dragonwave never made antennas - they private labeled either Commscope >

[AFMUG] OT power company guy anchors

When I designed my shop, I was fitting it into an odd sized lot on a subdivision I was doing. The lot was triangular and of course the building rectangular. I wanted to be able to drive a semi+ trailer all the way around the whole building so that access to my loading dock was easy and nobody

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Good point. Has to be circular waveguide on the antenna. Sent from my iPhone > On Jul 3, 2019, at 4:27 PM, Tim Hardy wrote: > > Dragonwave never made antennas - they private labeled either Commscope > ValueLine or RadioWaves antennas. These would require an OMT or > dual-polarized feeds to

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Dragonwave never made antennas - they private labeled either Commscope ValueLine or RadioWaves antennas. These would require an OMT or dual-polarized feeds to get both polarizations. > On Jul 3, 2019, at 10:27 AM, Keefe John wrote: > > The TX power is correct. > > We'll double check the

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

The duplexors are in the proper alignment and they are not the mis-labeled ones. We've had that issue before. On Wed, Jul 3, 2019 at 2:06 PM Tim Hardy wrote: > Exactly - mislabeled duplexers has been a known problem. > > On Jul 3, 2019, at 12:18 PM, Mathew Howard wrote: > > Did you make sure

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Exactly - mislabeled duplexers has been a known problem. > On Jul 3, 2019, at 12:18 PM, Mathew Howard wrote: > > Did you make sure you have the duplexors connected the right direction? I did > that wrong once... and make sure you have the right duplexors for the > sub-band you're on. > > On

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Did you make sure you have the duplexors connected the right direction? I did that wrong once... and make sure you have the right duplexors for the sub-band you're on. On Wed, Jul 3, 2019 at 10:50 AM Brian Sullivan wrote: > It's important to note when you attach the duplexors to the radio that

Re: [AFMUG] Force 300 Gripes

On the bright side, assembly is much quicker and simpler than the Force 200. The sad thing is, all they would've had to do to make them left hand mountable, is make the L bracket about a quarter inch wider, and you could've just flipped the radio over. As far as the U-bolt vs the Force200 style

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

It's important to note when you attach the duplexors to the radio that you are tightening both SMA connectors at the same time. They warn about damage than can occur if you tighten them down one at a time. On 7/3/2019 10:14 AM, Keefe John wrote: They are N Connectors and they came with the

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

They are N Connectors and they came with the adapter from Chuck. We're going to double-check the tightness of the adapter and swap the leads tonight. On Wed, Jul 3, 2019 at 10:05 AM wrote: > Could be the adapter. They are pretty simple and hard to screw up, but > the cables could be bad too.

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Make sure you don’t have a mixup between SMA and RPSMA connectors. I did that once, I assumed everything was RP and got an antenna with regular SMA connectors on it. Had to buy different coax cables. Signal was trying to jump the air gap between two female inner connectors. From: AF On

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

The TX power is correct. We'll double check the tightness but the techs said they didn't see an issue when installed. It is possible the leads are switched at one end, however you are correct Chuck that UBNT claims that doesn't matter with this radio. Is anyone sure the Dragonwave dishes

[AFMUG] Force 300 Gripes

We got our first EPMP3000 radio in the air. I'm happy with the throughput, but Man the Force300 needs a redesign! I would really have through they would have improved on the Force200 design, which was a major step up from the Force110. Instead it's slipped way back from a function and

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Both chains and both directions? Cross pol would be about 20db down but doesn’t that radio automagically take care of that for you? Sent from my iPhone > On Jul 3, 2019, at 7:24 AM, Keefe John wrote: > > We took a Dragonwave Horizon Compact Pluses off a link and used Chuck's > adapters to

Re: [AFMUG] 20 Db Loss with AF-11FX Adapters

Correct TX Power in the AF11? Have you checked the adapter is still tight on the dish? We had one where the clips wouldn't stay latched. We had to secure them with zipties. On 7/3/2019 8:24 AM, Keefe John wrote: We took a Dragonwave Horizon Compact Pluses off a link and used Chuck's

Re: [AFMUG] Bendable single use SMA torque wrench

Haha I knew I should have prefaced this with stating I know how fingers and wrenches work :-D I get your points and suggested much the same, but at the same time see their point. On Tue, Jul 2, 2019 at 4:40 PM Mathew Howard wrote: > > Yeah, that seems a little goofy. just use a 5/16" or 8mm

[AFMUG] 20 Db Loss with AF-11FX Adapters

We took a Dragonwave Horizon Compact Pluses off a link and used Chuck's adapters to install AF-11FXs on the Dragonwave dishes. Now we're seeing a 20 Db signal loss on the RSL. The DSL with the original Dragonwaves was 1 or 2 db off the PCN. What could be the problem? Keefe -- AF mailing list

Re: [AFMUG] cambium goes public

Dude that was a week ago. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 3, 2019 at 8:18 AM David Milholen wrote: > > https://www.rcrwireless.com/20190701/network-infrastructure/cambium-networks-goes-public > > > > -- > AF mailing