Re: [AFMUG] IceQube Cabinet AC units

I have never had a 240 anything not work on 208. 240-24=216 Most things can handle +- 10% 216 is not too far off of 208 and some 208 three phase systems run high. That is only a 5 amp circuit. A 208 to 30 volt 5 amp transformer can be wired in a boost config. Or anything close. 240 to 24

Re: [AFMUG] IceQube Cabinet AC units

probably, if not you can get a boost transformer for cheap, probably $100 On Tue, Sep 27, 2022 at 3:39 PM Nate Burke wrote: > I got a couple used cabinets that have IceQube IQ 4000BTU ac units. The > Label says 230V 60hz, but most of my sites have 208V 3 phase power. > Will they still work?

[AFMUG] IceQube Cabinet AC units

I got a couple used cabinets that have IceQube IQ 4000BTU ac units. The Label says 230V 60hz, but most of my sites have 208V 3 phase power. Will they still work? Nothing on the IceQube site lists 208v as an option for these units, nor does any documentation I found address 208v/230v. Years

Re: [AFMUG] Speedtest client appliance

$3500 ish. It’s mostly meant for a PON install tech to check light levels and troubleshoot installs but it has a built in Speedtest client so that it can run 10G ethernet tests as well. Server can be your own Speedtest.net instance or a nearby one. Mark Mark

Re: [AFMUG] Adapting 3/4" HDPE to 1" PVC

The ones we use for fiber will take up to 250 lbs of pressure. They have O rings in them. From: Bill Prince Sent: Tuesday, September 27, 2022 10:16 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Adapting 3/4" HDPE to 1" PVC There are couplers for HDPE. The ones I've seen are

Re: [AFMUG] Adapting 3/4" HDPE to 1" PVC

There are couplers for HDPE. The ones I've seen are not great at holding any kind of pressure or seal as it were, but they exist. -- bp part15sbs{at}gmail{dot}com On Tue, Sep 27, 2022 at 8:14 AM Chuck McCown via AF wrote: > There are compounds that claim to be able to glue hdpe, but they

Re: [AFMUG] Adapting 3/4" HDPE to 1" PVC

There are compounds that claim to be able to glue hdpe, but they require you to buff and then burn the outer surface with a torch. That converts it to a molecule that is polar enough to glue. So you still are not actually gluing hdpe but this other compound that is thermally created from

Re: [AFMUG] Adapting 3/4" HDPE to 1" PVC

Hdpe cannot be glued. Sent from my iPhone > On Sep 26, 2022, at 11:20 PM, Jason McKemie > wrote: > > Will try that, I figured they would stick together at that point. > > I've used couplers, but they're not deep enough and it doesn't bind together > the same way the flared end does with

Re: [AFMUG] Speedtest client appliance

How much is this Veex FX120 device approximately? Do you need a server at the headend to test to? From: AF On Behalf Of Mark Radabaugh Sent: Monday, September 26, 2022 5:47 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Speedtest client appliance Not in the cost