Hello, I’ve been suffocating the same problem. I applied ipa-server-certinstall
without adding ca first. I applied your steps and added my ca.crt to
/etc/ipa/ca.crt and /etc/ipa/nssdb with certutil, after than I run
ipa-certupdate and it fails again.
[root@xxx ~]# certutil -d sql:/etc/ipa/nssd
Public bug reported:
Audio balance settings is reset when the volume is turned down to the
end.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 5.4.0-53.59-generic 5.4.65
Uname: Linux 5.4.0-53-generic x86_64
NonfreeKernelModules: w
Public bug reported:
Audio balance settings is reset when the volume is turned down to the
end.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 5.4.0-53.59-generic 5.4.65
Uname: Linux 5.4.0-53-generic x86_64
NonfreeKernelModules: w
Public bug reported:
Audio balance settings is reset when the volume is turned down to the
end.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 5.4.0-53.59-generic 5.4.65
Uname: Linux 5.4.0-53-generic x86_64
NonfreeKernelModules: w
I can also confirm that this bug is still present. I'm on Ubuntu 19.04
with the latest drivers & updates installed.
Also, I want to add something here: It's not that it specifically
limits the framerate to 60 Hz. Rather, it limits it to the monitor with
the lowest refresh rate. Try setting one
I can also confirm that this bug is still present. I'm on Ubuntu 19.04
with the latest drivers & updates installed.
Also, I want to add something here: It's not that it specifically
limits the framerate to 60 Hz. Rather, it limits it to the monitor with
the lowest refresh rate. Try setting one
I can also confirm that this bug is still present. I'm on Ubuntu 19.04
with the latest drivers & updates installed.
Also, I want to add something here: It's not that it specifically
limits the framerate to 60 Hz. Rather, it limits it to the monitor with
the lowest refresh rate. Try setting one
I can also confirm that this bug is still present. I'm on Ubuntu 19.04
with the latest drivers & updates installed.
Also, I want to add something here: It's not that it specifically
limits the framerate to 60 Hz. Rather, it limits it to the monitor with
the lowest refresh rate. Try setting one
Public bug reported:
I have two different monitors hooked up. One has a 60 Hz refresh rate, the
other one has a 144 Hz
one. I did make sure to select the correct resolution and refresh rate for
booth.
The issue is that any objects on the desktop environment such as windows
(browsers, file mana
Public bug reported:
I have two different monitors hooked up. One has a 60 Hz refresh rate, the
other one has a 144 Hz
one. I did make sure to select the correct resolution and refresh rate for
booth.
The issue is that any objects on the desktop environment such as windows
(browsers, file mana
Public bug reported:
I have two different monitors hooked up. One has a 60 Hz refresh rate, the
other one has a 144 Hz
one. I did make sure to select the correct resolution and refresh rate for
booth.
The issue is that any objects on the desktop environment such as windows
(browsers, file mana
Public bug reported:
I have two different monitors hooked up. One has a 60 Hz refresh rate, the
other one has a 144 Hz
one. I did make sure to select the correct resolution and refresh rate for
booth.
The issue is that any objects on the desktop environment such as windows
(browsers, file mana
I have same issue with my FinePix T350
I can browse it this way:
> $ gphoto2 --auto-detect
Model Port
--
USB PTP Class Camera usb:002,006
> $ nautilus gphoto2
I have same issue with my FinePix T350
I can browse it this way:
> $ gphoto2 --auto-detect
Model Port
--
USB PTP Class Camera usb:002,006
> $ nautilus gphoto2
I have same issue with my FinePix T350
I can browse it this way:
> $ gphoto2 --auto-detect
Model Port
--
USB PTP Class Camera usb:002,006
> $ nautilus gphoto2
Hello i found i very cheapish website that gives out contest prizes called
kemikampen you can basically stop the timers for the questsion and the max
score but the problem is that i get negative score for doing that for some
odd reason? anyone that can help me ? website kemikampen.se some info i
Hello Im in a constest that uses scripts to show the answers and there is a
timer so the faster you click the better score you got but the questsion
are at random points and directions in the video any chance that you can
change that with firebug? For example stop the script timer and like
"pau
there is a problem in zebra indexing. it doesn't support malayalam and
arabic unicode fonts
>
> --
> sincerly
> your brother
> muhammed ali narippatta
> mkpnarippa...@gmail.com
>
>
--
sincerly
your brother
muhammed ali narippatta
mkpnarippa...@gmail.com
--
tup>
> section
> >
>
>
>
>
> On Wed, Jul 11, 2012 at 8:53 PM, muhammed ali <[hidden
> email]<http://user/SendEmail.jtp?type=node&node=5719400&i=0>>wrote:
>
>
> > how to connect two system by lan and access opac through the second
> &g
how to connect two system by lan and access opac through the second machine.
convey necessary commands. i am new to koha and ubuntu
--
View this message in context:
http://koha.1045719.n5.nabble.com/koha-networking-tp5719387.html
Sent from the Koha-general mailing list archive at Nabble.com.
please let us know how much amount would be reqired for this?
On Sun, Aug 16, 2009 at 5:51 PM, noufal mechery wrote:
>
>
> Dear friend,
>
> Two Indian prisoners, Mr. Thajudeen (Anchal, Kollam) and Mohmmed Yousuf
> Peez ((Areekode, Malappuram), who have completed their terms at the Al-Hair
> P
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/17419767/Dependencies.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/17419768/DpkgTerminalLog.txt
--
acid is unable to configure
https://bugs.launchpad.net/bugs/267926
You received this bug
Public bug reported:
Binary package hint: acidbase
i insert the password and it always said failed
ProblemType: Package
Architecture: i386
Date: Mon Sep 8 20:57:46 2008
DistroRelease: Ubuntu 8.04
ErrorMessage: subprocess post-installation script returned error exit status 1
Package: acidbase 1.
şu an depolarda mysql5.0 varbundna önceki versiyonları nerden bulabilirim.
Dear All,
I have seen some graphs where people are plotting disk usage, memory, cached
memory & other stuff on a single graph !!. , is it possible to have Cisco
Interface in/out traffic & input/output error statistics on the same graph
Thanks & regards
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
You have configured Maxbytes to 100 Mb only, then anything above 100 mb will
be dropped by MRTG. Increase the Maxbytes to your interface speed.
Regards
Muhammed Ali
-Original Message
fsck ile tüm partitionları tarattım hepsinde temiz dedi.grub-install /dev/hda yazdığımda Şöyle bi mesaj veriyor.Probing devices to guess BIOS drives. This may take a long time./dev/hda does not have any corresponding BIOS drive.
Makinemde netinst cd si ile debian kurdum. yaklaşık 75 gündür reboot etmiyordum ;) geçen elektrikler gitti ve ups in gücü kalmadı otomatikman kapandı ve tekrar açtığımda
GRUB>yazıyordu. oraya root (hd0,0)setup (hd0)yazmayı denedim. yine olmadı. scsi bi harddisk var üzerinde. ayrıca partitionların
You need to SNMP version 2 than version 1
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Adam Bayless
Sent: Wednesday, May 31, 2006 8:10 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] A target arithmetic issue
I have three OC3
merhaba/var/www, /var/lib/mysql, /var/cache/bindbu gibi dizinleri günlük veya gün içinde 2 kez zipyerek yedeklenmesini istiyorum. bunun için ne yapmam gerek?yardımlarınız için tşk.
aptitude install php5.0-mssql
Reading package lists... Done
Building dependency tree... Done
Reading extended state information
Initializing package states... Done
E: Unable to correct problems, you have held broken packages.
E: Unable to correct dependencies, some packages cannot be installed
E
There are lots of 3rd party commercial tools available. Try www.neon.com
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Constantine A. Murenin
Sent: Friday, March 31, 2006 12:57 PM
To: Cook, Garry
Cc: [EMAIL PROTECTED]
Subject
debian r3 üzerine proftp kurdum. yerel ağdan çok yavaş bağlanıyorum.
uzaktaki bi server a gönderdiğim bilgilerin 10 da birini yerel ağdaki
ftp servera gönderemiyorum. problem ne olabilir. yardımlarınız için
şimdiden teşekkürler.
apache şöyle bi hata veriyor. nedeni ne olabilir çözemedim .Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address [::]:80no listening sockets available, shutting down
Unable to open logs
webmin-virtual-server da proftp yi aktif hale getiriyorum.
yeni bi hesap açarken şöyle bi hata veriyor.
Failed to create virtual server : Virtual FTP cannot be enabled unless a
virtual IP address is allocated
ne yapmam lazım. teşekkürler...
webmin apache2 yi desteklemiyor . apache2 için önerebileceğiniz bi yönetim programı var mı?
apache2 kurdum. webmin-virtual server a kullanıyorum.
1. problem)
Apache çalışıyor. ama webmin-virtual-server da çalışmıyor olarak gösteriyor. webmin in apache2 desteği olmayabilirmi?
2.problem)
webmin-virtual-server ile virtualhostlar oluşturdum. her host un adresi direk
http://www.xxx.com.
bu paketi kurdum gerekli ayarlamaları yaptım. verdiği hata şu
Warning: mssql_connect(): Sybase: Client message: Server is unavailable or does not exist. (severity 78) in /home/progmas/public_html/config.php on line 5
Warning: mssql_connect(): Sybase: Unable to connect in /home/progm
Merhaba
if ($_GET ["pg"]==) {require ('anasayfa.php'); }
if ($_GET ["pg"]!=) { $sayfa="$pg.php"; require ($sayfa); }
yazıyorum.
sayfada verdiği hata aşağıdaki şekilde. :(
Warning: main(.php): failed to open stream: No such file or directory in /home/progmas/public_html/index.php on line 276
Merhaba
apt-get apache php4
komutu ile kurulumlaro yaptım
win 2003 makinedeki bi sql server a bağlanmak istiyorum.
yazdığım kod:
$baglanti=mssql_connect ("192.168.1.11","deneme","deneme123") or die(" server a bağlanamadı");
mysql_select_db("deneme",$baglanti) or die("db ye bağlanamadı");
ver
Are you able to see index graphs on http://localhost/cgi-bin/mrtg-rrd.cgi
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Manish Sapariya
Sent: Friday, October 07, 2005 9:31 AM
To: [EMAIL PROTECTED]
Subject: [mrtg] Could get
Adjust your MaxBytes Variable accordingly. For 10mbps it will be 125
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of von dan
Sent: Thursday, September 22, 2005 8:46 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] mrtg reading
How
An HTML attachment was scrubbed...
URL:
http://www.math.louisville.edu/pipermail/macgroup/attachments/20050711/2f55ecce/attachment.html
I don't think that you need to downgrade the current version. But the
scenario which you are using is already working with me for more than a
year.
Which OS you are using ?
Muhammed Ali
-Original Message-
From: Andrea Rossi [mailto:[EMAIL PROTECTED]
Sent: Friday, February 18,
I am using MRTG-2.10.15 and it is working fine, are you using the latest
version ?/
Regards
Muhammed Ali
-Original Message-
From: Andrea Rossi [mailto:[EMAIL PROTECTED]
Sent: Friday, February 18, 2005 3:39 PM
To: Muhammed Ali; [EMAIL PROTECTED]
Subject: Re: [mrtg] Problem
Configure the target on the other way
Target[test1]: -1:[EMAIL PROTECTED] + 7:[EMAIL PROTECTED]
MaxBytes[test1]: 384000
Options[test1]: bits
kilo[test1]: 1024
Unscaled[test1]: dwmy
This should work
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED
All the MRTG configuration lines should start from column 1 other wise that
line will be neglected by MRTG.
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Plantier, Spencer
Sent: Tuesday, February 15, 2005 8:22 PM
To
Please use wperl c:\mrtg\bin\mrtg --logging=eventlog c:\mrtg\config\mrtg.cfg
and see
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Meyer, Bruce
Sent: Sunday, February 13, 2005 9:52 PM
To: '[EMAIL PROTECTED]
Dear Mr. Jon,
This will only graph the number of advertised prefixes,, am I right ?..
Infact I need to graph the traffic going through each(or particular)
prefixes advertised though us.
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of
Hello friends,
We have a cisco 7206 router configured for BGP. Is there any way to
graph MRTG on advertised IP addresses for their usage ?
regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.orgHomepage
Yes I am using near about 200 OID(may be more, I didn't count it) on a
Compaq Prolliant server, Pentium 3 with 512Mb RAM on Redhat-9, I guess this
should work with Windows as well
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Beha
Use absmax[_]: 1250 at global configuration, this will solve your
problem
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Rodolfo J. Paiz
Sent: Friday, October 15, 2004 7:56 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] Graphing over
and doesn't
support SNMP MIB.
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Masood Ahmad Shah
Sent: Wednesday, July 07, 2004 12:55 PM
To: Muhammed Ali; [EMAIL PROTECTED]
Subject: [mrtg] Re: MRTG-MySql
yeah you can...
what ty
Dear friends
If I have some data in a MySQL database, can I use MRTG to read from the
database and generate graphs based on the data?,, if any one have any kind
of documents regarding this,, please forward to me !!!
Regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL
Dear Friends,
Can we read data from RRD database through VB.Net, can any one help me
Regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.orgHomepage http://www.mrtg.org
WebAdminhttp
Try to use mrtg-rrd.cgi instead of 14all.cgi
Regards
Muhammed Ali
Horizon Satellite service LLC
Dubai
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, May 05, 2004 4:39 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL
Are you using 14all.cgi ?
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Alex Moen
Sent: Wednesday, May 05, 2004 4:02 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] Graph not the same as the numbers
Hi all...
I am seeing a difference
Dear friends
Hope all you are doing fine..
I just want to ask something that, Can I avoid or can I make the value to
zero of either Input data or output data, I couldn't find anything on mrtg
doc reference guide regarding this
Regards
Muhammed Ali
Horizon satellite services
R
Dear Wimal,
Please see the bellow URL for MRTG for your internet usage
Downlink :- http://195.73.9.10/statistics/Horizon/Horizon/HCS_Belleli/
Uplink:- http://195.73.9.10/statistics/Horizon/Horizon/HCS_Belleli_scpc/
Username : horizon
Password: hcs!jsf2b
Regards
Muhammed
Use mrtg-rrd.cgi instead of 14all.cgi, it is much better that 14all.cgi
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jim Mozley
Sent: Friday, January 16, 2004 5:53 PM
To: '[EMAIL PROTECTED]'
Subject: [mrtg] Inconsist
Speed of the link usually specify as kbits while maxbytes as bytes, 8
bits=1bytes so if you have link of 128K, max byte will be 128/8=16K ie,
maxbyte: 16000
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Ruben Montes
Sent
Change Maxbytes to 32000
Regards
Muhammed Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Bilal Dar
Sent: Thursday, January 08, 2004 1:38 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] %age problem
Hi,
I have a 256k shared wan link, there was no
How will you connect Modem to your PC ?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of mohammed subhan
Sent: Wednesday, December 03, 2003 4:37 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] OID requires to measure Eb/No of Radyne ComStream
Hello,
I am using
Remove this line from your config file
Supress[cacheHttpHits]: y
Muhamned Ali
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Stefan Sabolowitsch
Sent: Thursday, October 30, 2003 1:13 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] See no yearly diagram
Hi Ng,
Hello friends,
How can I stop my mrtg which is working on Linux-9.0 as Daemon, because
some times I need to change my config file and need to restart, can any one
help me ??
Regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
the same
http://195.46.225.136/cgi-bin/14all.cgi?log=194.154.194.202_1
<http://195.46.225.136/cgi-bin/14all.cgi?log=194.154.194.202_1&cfg=test.cfg>
&cfg=test.cfg
Can any one help me ?
Regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL PROTECTED]
Ar
the same
http://195.46.225.136/cgi-bin/14all.cgi?log=194.154.194.202_1
<http://195.46.225.136/cgi-bin/14all.cgi?log=194.154.194.202_1&cfg=test.cfg>
&cfg=test.cfg
Can any one help me ?
Regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL PROTECTED]
Ar
I am using RRD and 14all.cgi to display graphs, so this a good news, where
can I find routers2.cgi ???
-Original Message-
From: Peter Glanville [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 07, 2003 6:06 PM
To: Muhammed Ali
Subject: Re: [mrtg] Re: Combine two graphs
Another option
Hello Hujismans,
Do you have any HOWTO's or have you any pre-maid scripts for that, I am not
expert to write scripts
Can you please help me
-Original Message-
From: Huijsmans, JCM (Jan) [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 07, 2003 1:27 PM
To: Muhammed Ali
Subjec
we display both in a
single page ??
Regards
Muhammed Ali
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.orgHomepage http://www.mrtg.org
WebAdminhttp://www.ee.ethz.ch/~slist/lsg2.cgi
re, I mean if the
current traffic is 100K, graph shows as 120k. according to the graph(not by
the statistics), I am using a 160K on a 128K link !!, can
anyone help me ??( I am using same configuration on windows XP, both graph
and statistics are same)
Regards
Muhamme
71 matches
Mail list logo