I use the cs4236 driver for my aopen aw37 sound card, but in everyting from
alsa to mplayer to mozilla I get occasional pops and clicks or almost like a
crackling noise. Anyone have any idea what might be causing this or how I
could fix this? By the way right now i'm using 1.0pre1, but it also do
Thomas & Jaroslav,
Here's a graphical representation of the noise problem I'm having
using the HDSP 9652. The attached png file shows the wave file I'm
playing on the top line, and then two separate outputs from the HDSP
9652. The two separate Pro Tools captures were done at the same time and
ar
Quoting Takashi Iwai <[EMAIL PROTECTED]>:
> i thought you got the silent output, but now you get a scraching
> output?
Ok, I must have just woken up... The scratchiness of the sound are the louder
parts of the music (so it appears anyway). So I am postulating that for some
reason the lower 8 bi
Hi Takashi,
from the version, Werner tested, I only changed filenames to the 'usx2y'.
So please commit snd-usb-usx2y_alsacvs.patch and cp the content of
snd-usb-usx2y.tar.bz2 into alsa-driver/usb (thats also commit? ;-).
alsa-driver/usb/us428 is obsoleted then.
Thanks,
Karsten
Am Montag, 24. No
On Mon, Nov 24, 2003 at 09:50:32PM +0100, Werner Schweer wrote:
> On Monday 24 November 2003 14:37, Karsten Wiese wrote:
> > Hi,
> >
> > would you please give this a try an your us122s?
> > I integrated Martins stuff into mine. us428 still works here.
> > besides patching you'll need to copy the at
> > Then you can compare (maybe via some editor) if the whole
> > .wav file is in the recorded stream (plus some zero samples at
> begging and
> > end of this stream). Or, you can send me your source and recorded files
> > and I'll compare them for you (only mark which file is master).
> >
> >
If my hammerfall (rme9652) sound card is locked slave to 48 kHz, and I put
44.1 kHz into snd_pcm_hw_params_set_rate_near for playback it accepts it,
should it really be that way? I expected that it would set the rate to 48kHz,
since the card does not change the sample rate to 44.1 kHz (looking
Fernando Pablo Lopez-Lezcano <[EMAIL PROTECTED]> writes:
> > > Options:
> > > a) define 'distribution="redhat"' for the mandrake detection
> > > code _if_ the oss options erasure for redhat works fine under
> > > mandrake (mandrake users should test this).
> > > b) add another handler for mandrake
On Mon, 24 Nov 2003, Giuliano Pochini wrote:
> snd_ctl_elem_info_t.dimen contains the dimensions of the array of
> controls. AFAIK there are no drivers which use that feature (but mine)
> to look for examples. We have to agree about the order of them:
>
> Array[d0][d1][d2][d3]
>
> or
>
> Array[
> > > > > > I think we need a similar extension to support Mandrake,
> > > > > > after installation from the sources all modules in
> > > > > > modules.conf where gone, except the ones from alsa.. :-)
> > > > >
> > > > > I think the patch will fix mandrake too. I have the dubious
> > > > > honor o
On Monday 24 November 2003 14:37, Karsten Wiese wrote:
> Hi,
>
> would you please give this a try an your us122s?
> I integrated Martins stuff into mine. us428 still works here.
> besides patching you'll need to copy the attached header into
> alsa-driver/usb/us428.
> you'll probaply also still nee
Fernando Pablo Lopez-Lezcano <[EMAIL PROTECTED]> writes:
> > > > > I think we need a similar extension to support Mandrake,
> > > > > after installation from the sources all modules in
> > > > > modules.conf where gone, except the ones from alsa.. :-)
> > > >
> > > > I think the patch will fix ma
snd_ctl_elem_info_t.dimen contains the dimensions of the array of
controls. AFAIK there are no drivers which use that feature (but mine)
to look for examples. We have to agree about the order of them:
Array[d0][d1][d2][d3]
or
Array[d3][d2][d1][d0]
I used the first one. Is it ok ?
--
Giulian
>
> Ok, can you force the master rate for HDSP?
Yes, I can force the HDSP master rate to be 44.1KHz.
I can then force the Pro Tools PC be a master also, at 44.1K, but there will
be random clicks and pops since the two are not synced to each other. If I
do this and record on the Pro Tools PC, I ge
> At Mon, 24 Nov 2003 14:59:42 +,
> Thierry Vignaud wrote:
> >
> > [1 ]
> > Fernando Pablo Lopez-Lezcano <[EMAIL PROTECTED]> writes:
> >
> > > > I think we need a similar extension to support Mandrake, after
> > > > installation from the sources all modules in modules.conf where
> > > > gone
Takashi Iwai wrote :
I updated hdspmixer and hdspconf to fix all these problems :
http://www.undata.org/~thomas/
applied to cvs. thanks!
I just checked cvs to send you a clean patch instead, but the latest
changes were not in there yet. Sorry for the extra workload this gives you.
no proble
At Mon, 24 Nov 2003 12:53:47 -0500,
Apostolos Dimitromanolakis wrote:
>
> Hi,
>
> here's the new revision of the Audiotrak Prodigy 7.1 driver. The
> driver now initializes correctly for the 24.576Mhz crystal and also I
> have added some more controls for adc oversampling ratio (in theory
>
On Mon, 24 Nov 2003, Mark Knecht wrote:
> >
> > Ok, it's a thing that we would like to eliminate, but when I tried to
> > figure what's going on in the past, I wasn't successful. The best
> > thing to
> > measure if ALSA sends a wrong sample sequence to the output is to use the
> > digital I/O (S/
At Mon, 24 Nov 2003 14:37:52 +0100,
Karsten Wiese wrote:
>
> [1 ]
> Hi,
>
> would you please give this a try an your us122s?
> I integrated Martins stuff into mine. us428 still works here.
> besides patching you'll need to copy the attached header into
> alsa-driver/usb/us428.
> you'll probaply
At Mon, 24 Nov 2003 18:48:04 +0100,
Thomas Charbonnel wrote:
>
> Takashi Iwai a wrote :
> > At Mon, 24 Nov 2003 12:40:15 +0100,
> > I wrote:
> >
> >>>A new version of hdspmixer is also available here :
> >>>http://www.undata.org/~thomas/
> >>>It is mostly a bugfix release for H9632 users.
> >>>Th
At Mon, 24 Nov 2003 13:51:50 +0100,
I wrote:
>
> At Mon, 24 Nov 2003 13:36:42 +0100,
> I wrote:
> >
> > meanwhile, i'm trying to implement:
> >
> > (4) allow prepare callback to sleep with a special flag.
> >
> > this will be useful for other drivers, too, such as vx and korg1212
> > drivers wh
Hi,
here's the new revision of the Audiotrak Prodigy 7.1 driver. The
driver now initializes correctly for the 24.576Mhz crystal and also I
have added some more controls for adc oversampling ratio (in theory
should be changed automatically to 64x at 96Khz sampling rate) and dac
de-emphasis.
Takashi Iwai a wrote :
At Mon, 24 Nov 2003 12:40:15 +0100,
I wrote:
A new version of hdspmixer is also available here :
http://www.undata.org/~thomas/
It is mostly a bugfix release for H9632 users.
There is also a new version of hdspconf, but it only adds a .desktop
file and a nice icon (to bring i
>
> Ok, it's a thing that we would like to eliminate, but when I tried to
> figure what's going on in the past, I wasn't successful. The best
> thing to
> measure if ALSA sends a wrong sample sequence to the output is to use the
> digital I/O (S/PDIF or profi IEC958) for on playback side and captur
At Mon, 24 Nov 2003 14:59:42 +,
Thierry Vignaud wrote:
>
> [1 ]
> Fernando Pablo Lopez-Lezcano <[EMAIL PROTECTED]> writes:
>
> > > I think we need a similar extension to support Mandrake, after
> > > installation from the sources all modules in modules.conf where
> > > gone, except the ones
At Sun, 23 Nov 2003 20:23:11 +0100,
Christian Esken wrote:
>
> Hello,
>
> I have problems with snd_mixer_selem_get_capture_switch(elem,pos,&value)
> in my KMix mixer application. The "value" returned does *not* reflect the
> actual state in all cases.
> Probably I am doing something wrong, if so
Fernando Pablo Lopez-Lezcano <[EMAIL PROTECTED]> writes:
> > I think we need a similar extension to support Mandrake, after
> > installation from the sources all modules in modules.conf where
> > gone, except the ones from alsa.. :-)
>
> I think the patch will fix mandrake too. I have the dubious
On Mon, 24 Nov 2003 14:01:16 +0100, Takashi Iwai wrote:
>At Mon, 24 Nov 2003 02:20:07 -0500,
>Jonathan Kraut wrote:
>>
>> Everything works really well (hooray dmix! and thanks) with
>> alsa-driver-1.0.0pre2 and cmedia-8738 except the following midi related
>> things, which were working fine in v
At Mon, 24 Nov 2003 12:40:15 +0100,
I wrote:
>
> > A new version of hdspmixer is also available here :
> > http://www.undata.org/~thomas/
> > It is mostly a bugfix release for H9632 users.
> > There is also a new version of hdspconf, but it only adds a .desktop
> > file and a nice icon (to bring i
Hi,
would you please give this a try an your us122s?
I integrated Martins stuff into mine. us428 still works here.
besides patching you'll need to copy the attached header into
alsa-driver/usb/us428.
you'll probaply also still need Martin's patched usx2yloader & infrastructure
files.
Gruesse,
K
At Mon, 24 Nov 2003 02:20:07 -0500,
Jonathan Kraut wrote:
>
> Everything works really well (hooray dmix! and thanks) with
> alsa-driver-1.0.0pre2 and cmedia-8738 except the following midi related
> things, which were working fine in version 0.9.8 and earlier:
>
> here's what i did (on gentoo)
>
At Fri, 21 Nov 2003 23:29:01 +0100,
Stefan Kristiansson wrote:
>
> I had some troubles getting 5.1 sound to work with my cmi8738 based card
> and noticed that
> CMI8738-MC6.conf says:
>
> CMI8738-MC6.pcm.surround51.0 "cards.CMI8738-MC6.pcm.front.0"
>
> this doesn't work (at least not with my ca
At Mon, 24 Nov 2003 13:36:42 +0100,
I wrote:
>
> meanwhile, i'm trying to implement:
>
> (4) allow prepare callback to sleep with a special flag.
>
> this will be useful for other drivers, too, such as vx and korg1212
> drivers which require the handshaking.
> but what i'm doing is still a hack,
At Mon, 24 Nov 2003 13:10:55 +0100 (MET),
Clemens Ladisch wrote:
>
> Takashi Iwai wrote:
>
> > Clemens Ladisch wrote:
> > >
> > > - initialize active_mask and unlink_mask each time before URBs are
> > > started
> >
> > we still need to check here whether the urbs are really free, since
> > a pa
Takashi Iwai wrote:
> Clemens Ladisch wrote:
> >
> > - initialize active_mask and unlink_mask each time before URBs are
> > started
>
> we still need to check here whether the urbs are really free, since
> a path like trigger stop -> prepare -> trigger_start is possible.
> in this case, the oper
At 21 Nov 2003 15:40:51 -0800,
Fernando Pablo Lopez-Lezcano wrote:
>
> Included is a patch that fixes alsaconf to work correctly under fedora
> core 1. Otherwise alsaconf happily creates a modules.conf file that only
> contains the alsa configuration and nothing else (a path in the if's
> that doe
At Sun, 23 Nov 2003 18:21:01 +0100,
Thomas Charbonnel wrote:
>
> [1 ]
> Hi,
>
> The attach patch fixes problems with speed modes for H9632 cards (many
> thanks to Pentti Ala-Vannesluoma for testing the driver and helping
> finding bugs), and the AutoSync mode issue (for all cards) reported by
>
At Mon, 24 Nov 2003 08:46:08 +0100 (MET),
Clemens Ladisch wrote:
>
>
> - don't clear active_mask bits until it's clear that the URB is _not_
> resubmitted, to prevent a race with unlinking
> - initialize active_mask and unlink_mask each time before URBs are
> started
we still need to check h
At Mon, 24 Nov 2003 08:46:08 +0100 (MET),
Clemens Ladisch wrote:
>
>
> - don't clear active_mask bits until it's clear that the URB is _not_
> resubmitted, to prevent a race with unlinking
> - initialize active_mask and unlink_mask each time before URBs are
> started
we still need to check h
At Sun, 23 Nov 2003 20:50:45 +0100,
Martin Langer wrote:
>
> On Sun, Nov 23, 2003 at 03:45:57PM +0100, Martin Langer wrote:
> >
> > here is another fix for 2.2 kernels:
> >
> > --- acore/pci_compat_22.c.ORIGINAL Sun Nov 23 14:41:21 2003
> > +++ acore/pci_compat_22.c.FIX Sun Nov 23 15:38:3
At Mon, 24 Nov 2003 15:19:42 +1100 (EST),
tom burkart wrote:
>
> The problem I reported several times is still present.
>
> Problem:
>
> Toshiba Tecra Notebook (Yamaha YMF-744B) still has scratchy,
> unintelligible sound output.
> kernel 2.4.22, alsa-driver 1.0.0pre2
>
> Yet, the ymfpci kernel
At Mon, 24 Nov 2003 00:01:53 +0100,
Christian Esken wrote:
>
> On Tuesday 21 October 2003 11:16, Tommi Sakari Uimonen wrote:
> > > and I want to know where I find some documnent to know
> > > how to use these alsa lib api,namely,I want a
> > > specification of these api,thanks a lots .
> >
> > htt
- don't clear active_mask bits until it's clear that the URB is _not_
resubmitted, to prevent a race with unlinking
- initialize active_mask and unlink_mask each time before URBs are
started
- don't call sleeping functions in trigger callback
Index: alsa-kernel/usb/usbaudio.c
===
Index: alsa-kernel/pci/ac97/ac97_codec.c
===
RCS file: /cvsroot/alsa/alsa-kernel/pci/ac97/ac97_codec.c,v
retrieving revision 1.114
diff -u -r1.114 ac97_codec.c
--- alsa-kernel/pci/ac97/ac97_codec.c 20 Nov 2003 16:00:01 - 1.
Without this patch, usb-uhci oopses after ALSA 1.0's snd-usb-audio has
asynchronously unlinked its URBs. Apparently, the code for handling
still-active TDs forgets to check whether the TD actually must be
unlinked.
--- linux-2.4.23-rc1/drivers/usb/host/usb-uhci.c.orig Sun Nov 23 00:11:22 2003
Everything works really well (hooray dmix! and thanks) with
alsa-driver-1.0.0pre2 and cmedia-8738 except the following midi related
things, which were working fine in version 0.9.8 and earlier:
here's what i did (on gentoo)
$ /etc/init.d/alsasound start
$ cat /proc/asound/cards
0 [CMI8738MC6
46 matches
Mail list logo
