My suggestion might be blasphemous to the true audio professionals, but I
have been very pleased overall so far with my Soundblaster Audigy 2 NX
device. It has the potential to do 96KHz, 24-bit playback and capture. I
have recorded at 48KHz 16-bit from its line in jack, and the quality was
excell
Hi this is a broadcast to all stations...
I think i finally got it. The definitive patch to migrate the Aureal
driver into the alsa-kernel path, and hopefully into kernel 2.6.
Download it at:
http://galadriel.mat.utfsm.cl/~mjander/aureal/alsa/aureal-alsakernel.patch.gz
If you find any problem, r
James Courtier-Dutton wrote:
Once thing I have noticed, is that with the alc650, we used to have VRA
(alsa 0.9.8), but the 1.0.2 intel8x0 driver ignores the VRA and fixes
itself at 48000.
So, before I never needed the sample rate converters, but as it now
fixes the rate at 48000, I need the samp
Hi!
I have a motherboard based on the VIA KT600 Northbridge and VT8237
Southbridge. The codec is an ALC655.
I tried the ALSA module snd-via82xx. PCM audio works fine, but several things
did not work:
- The MIC input does not work, no matter how I set alsamixer
controls (the OSS driver via82c
On Tue, Jan 27, 2004 at 12:07:43AM +0100, Martin Langer wrote:
> On Mon, Jan 26, 2004 at 11:20:12AM +0100, Takashi Iwai wrote:
> > At Sat, 24 Jan 2004 01:23:28 +0100,
> > Martin Langer wrote:
> > >
> > > usx2y build by "./configure --with-cards=usb-usx2y" has a dependency problem:
> > >
> >
> >
Hallo,
Andreas Kuckartz hat gesagt: // Andreas Kuckartz wrote:
> Do you know if it works with a 2.4 kernel?
No, I didn't test this yet, but I strongly suppose, that it is the
same behaviour. I had the Edirol UA-20, when the Advanced mode wasn't
supported yet by ALSA (it is now). At that time, the
Takashi Iwai wrote:
At Mon, 02 Feb 2004 17:41:02 +,
James Courtier-Dutton wrote:
In alsa 0.9.8, the snd-intel8x0 worked find with my MB. An ICH5 with ALC650.
With alsa 1.0.2, I get: -
device: front -> no-sound output
device: surround40: -> Only sound on rear left, and rear right.
device: surrou
Do you know if it works with a 2.4 kernel?
Andreas
- Original Message -
From: "Frank Barknecht" <[EMAIL PROTECTED]>
To: "ALSA development" <[EMAIL PROTECTED]>
Sent: Monday, February 02, 2004 8:22 PM
Subject: [Alsa-devel] Some info about the Edirol UA-3 FX
> Hallo,
>
> I tested the Edi
Hallo,
I tested the Edirol UA-3 FX in my series of tests now, and this is
another device I cannot get to work. I get "no modules for USB product
582/50/100" in the logfiles. Attached is several diagnostics
information for later use.
ciao
--
Frank Barknecht _ _
hmm, it looks like a generic problem of intel8x0 with ALC65x.
in the recent version, the detection and implementation of PCM streams
have been changed, and i guess it's broken for these codecs.
I would think the same. I told you/alsa list about oss emulation with
mmap and quake3 problem (since fir
Hallo,
Frank Barknecht hat gesagt: // Frank Barknecht wrote:
> I tested the Edirol UA-3 FX in my series of tests now, and this is
> another device I cannot get to work. I get "no modules for USB product
> 582/50/100" in the logfiles. Attached is several diagnostics
> information for later use.
N
On Sun, Feb 01, 2004 at 01:58:06PM +0100, Karsten Wiese wrote:
> Am Freitag, 30. Januar 2004 21:12 schrieb Martin Langer:
> >
> > I guess it's time to create some official 224 driver/loader patches for
> > Alsa CVS now. Any objections?
>
> You uncommented any section containing USB_ID_US224 in snd
At Tue, 3 Feb 2004 01:32:49 +0800,
C.L. Tien <[EMAIL PROTECTED]> wrote:
>
> Is there a better way to do digital volume tuning without loss of
> cmpatability , especially for OSS applications? In the Azalia spec,
> PCM volume/mute is optional so there will be codecs without volume
> controls.
i b
Hallo,
Frank Barknecht hat gesagt: // Frank Barknecht wrote:
> I will now try to plug in a USB device. But first I send this mail, in
> case anything goes badly wrong. :)
I'm still alive!
Now it works with e.g. the Maya Audiotrak 5 I plugged in, which was
well behaving in the past days.
Still
Hallo,
Takashi Iwai hat gesagt: // Takashi Iwai wrote:
> well, it turned out that the USB in 2.6.2-rc3 changed its API... :-<
> we'll need a hack again.
Urgh. ;)
Well, but I've found out another thing: There was a compile warning in
usbaudio.c at function snd_usb_extigy_boot_quirk() about "impl
Hallo,
Takashi Iwai hat gesagt: // Takashi Iwai wrote:
> At Mon, 2 Feb 2004 17:31:44 +0100,
> Frank Barknecht wrote:
> > I'm trying to build ALSA-CVS for 2.6.2-rc3, because that kernel has
> > support for the emi62m firmware. Now I get unresolved symbols in
> > snd-usb-audio:
> >
> > request_mod
At Mon, 02 Feb 2004 18:57:10 +0100,
I wrote:
>
> At Mon, 2 Feb 2004 17:31:44 +0100,
> Frank Barknecht wrote:
> >
> > Hallo,
> >
> > I'm trying to build ALSA-CVS for 2.6.2-rc3, because that kernel has
> > support for the emi62m firmware. Now I get unresolved symbols in
> > snd-usb-audio:
> >
>
Is there a better way to do digital volume tuning without loss of cmpatability ,
especially for OSS applications? In the Azalia spec, PCM volume/mute is optional so
there will be codecs without volume controls.
Sincerely,
ChenLi Tien
-Original Message-
From: Takashi Iwai [mailto:[EMAI
Hallo,
Takashi Iwai hat gesagt: // Takashi Iwai wrote:
> do you enable the modle version?
> then you'll need to rebuild alsa-driver, too.
Oh, and the ice1712 driver, I also built, is working.
ciao
--
Frank Barknecht _ __footils.org__
At Mon, 2 Feb 2004 17:31:44 +0100,
Frank Barknecht wrote:
>
> Hallo,
>
> I'm trying to build ALSA-CVS for 2.6.2-rc3, because that kernel has
> support for the emi62m firmware. Now I get unresolved symbols in
> snd-usb-audio:
>
> request_module: failed /sbin/modprobe -- snd-card-1. error = 256
>
At Mon, 02 Feb 2004 17:41:02 +,
James Courtier-Dutton wrote:
>
> In alsa 0.9.8, the snd-intel8x0 worked find with my MB. An ICH5 with ALC650.
> With alsa 1.0.2, I get: -
> device: front -> no-sound output
> device: surround40: -> Only sound on rear left, and rear right.
> device: surround51: -
In alsa 0.9.8, the snd-intel8x0 worked find with my MB. An ICH5 with ALC650.
With alsa 1.0.2, I get: -
device: front -> no-sound output
device: surround40: -> Only sound on rear left, and rear right.
device: surround51: -> Only sound on rear left, and rear right, center, lfe
So, in all cases there
Hallo,
I'm trying to build ALSA-CVS for 2.6.2-rc3, because that kernel has
support for the emi62m firmware. Now I get unresolved symbols in
snd-usb-audio:
request_module: failed /sbin/modprobe -- snd-card-1. error = 256
snd_usb_audio: Unknown symbol usb_get_device_descriptor
Can anyone help?
c
At Mon, 2 Feb 2004 09:06:37 +0100 (CET),
Jaroslav wrote:
>
> On Sun, 1 Feb 2004, Davodet Olivier wrote:
>
> > Hello,
> >
> > My config :
> >
> > Biostar IdeQ 200T with an onboard C-Media CMI9739A 6-Channel AC'97 CODEC
> > Mandrake 9.2 : kernel 2.6.1 with alsa 1.0.1
> > (kernel-smp-2.6.1.1mdk-1-
At Sun, 01 Feb 2004 18:04:14 +0100,
Abramo Bagnara wrote:
(snip)
> With this patch you break write and read atomicity, you should:
>
> 1) read and save appl_ptr
> 2) update appl_ptr and avail
> 3) leave critical area
> 4) copy from/to user using saved appl_ptr
> 5) reenter critical area
>
> I've
Abramo Bagnara ha scritto:
Jaroslav Kysela ha scritto:
On Sun, 1 Feb 2004, Abramo Bagnara wrote:
Jaroslav Kysela ha scritto:
Modified Files:
rawmidi.c Log Message:
copy_*_user() function cannot be called from spinlock context
Index: rawmidi.c
Jaroslav Kysela ha scritto:
On Sun, 1 Feb 2004, Abramo Bagnara wrote:
Jaroslav Kysela ha scritto:
Modified Files:
rawmidi.c
Log Message:
copy_*_user() function cannot be called from spinlock context
Index: rawmidi.c
===
RCS file:
On Sun, 1 Feb 2004, Abramo Bagnara wrote:
> Jaroslav Kysela ha scritto:
> > Modified Files:
> > rawmidi.c
> > Log Message:
> > copy_*_user() function cannot be called from spinlock context
> >
> > Index: rawmidi.c
> > ===
> > RC
On Sun, 1 Feb 2004, Davodet Olivier wrote:
> Hello,
>
> My config :
>
> Biostar IdeQ 200T with an onboard C-Media CMI9739A 6-Channel AC'97 CODEC
> Mandrake 9.2 : kernel 2.6.1 with alsa 1.0.1
> (kernel-smp-2.6.1.1mdk-1-1mdk) and alsa lib 0.9.6
>
> I use the snd-intel8x0 module.
>
> This module
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Sonntag, 01. Februar 2004 18:50 schrieb Florian Schmidt:
> On Sun, 1 Feb 2004 13:48:38 +0100
> Florian Schmidt <[EMAIL PROTECTED]> wrote:
>
> problem persists with alsa-1.0.2
>
> Flo
Well,
I wish to report that on my soundblaster live card I can pl
30 matches
Mail list logo
