Hi,
my Multiface now works. I am not quite sure exactly what I did right,
but I suspect it is that I now load snd_hammerfall_mem at boot time. I
suspect some kind of faulty state is introduced if snd_hammerfall_mem
isn't loaded in the correct way. This is impossible to correct later by
unloading
Paul Davis wrote:
>
> ># alsactl store 1
> >alsactl: get_control:359: Unknown control type: 6
>
> have you updated your alsa-utils and alsa-lib? there was a new control
> type (64 bit integer) introduced for the H-DSP.
I removed everything alsa from my machine and reinstalled it. This error
is
>> i know its mundane, but are you sure you have the cables hooked up
>> correctly?
>
>I booted windows to check the setup, and it works.
>
> you can set the passthru control
>>
>>amixer cset name=Passthru 1
>>
>> and check that passthru is working OK.
>
>This doesn't work either.
O
hi
i'm new to this list. i'm writing because i have a hammerfall dsp
multiface soundcard with a pcmcia interface and would like to run it
under linux. is it already possible to test the new drivers? i think i
will need some help to get it to run for i have not so much experience
in solving difficu
Paul Davis wrote:
>
> i know its mundane, but are you sure you have the cables hooked up
> correctly?
I booted windows to check the setup, and it works.
you can set the passthru control
>
>amixer cset name=Passthru 1
>
> and check that passthru is working OK.
This doesn't work e
>i'm new to this list. i'm writing because i have a hammerfall dsp
>multiface soundcard with a pcmcia interface and would like to run it
>under linux. is it already possible to test the new drivers? i think i
>will need some help to get it to run for i have not so much experience
>in solving diffi
>Paul Davis wrote:
>> i have been using alsamixer to control the playback volumes, and it
>> seems to work fine. amixer reports the values correctly as well, so
>> try
>>
>> amixer cget numid=11 # channel 1 playback volume
>
>numid=11,iface=MIXER,name='Chn',index=1
> ; type=INTEGER,access=r
Paul Davis wrote:
> i have been using alsamixer to control the playback volumes, and it
> seems to work fine. amixer reports the values correctly as well, so
> try
>
> amixer cget numid=11 # channel 1 playback volume
numid=11,iface=MIXER,name='Chn',index=1
; type=INTEGER,access=rw---,valu
>Paul Davis wrote:
>> I am sure there will be minor glitches along the way. I would really
>> appreciate feedback from anyone with an H-DSP (marcus - that means
>> you! :)
>
>Everything looks good, I just can't get it to play anything for me.
>Probably due to my limited ALSA knowledge.
>
>I have A
Paul Davis wrote:
> I am sure there will be minor glitches along the way. I would really
> appreciate feedback from anyone with an H-DSP (marcus - that means
> you! :)
Everything looks good, I just can't get it to play anything for me.
Probably due to my limited ALSA knowledge.
I have Ardour up
I'm pleased to announce that ALSA now has support for the Hammerfall
DSP audio interface. Details of the Hammerfall DSP are available at
RME's website (www.rme-audio.com). The driver supports:
* all sample rates
* both MIDI ports
* "simple mixer" controls to allow alsamixer to c
11 matches
Mail list logo
