On Thu, 22 Jan 2004, James Courtier-Dutton wrote:
User application does VOL++.
OSS has a range from 0-100
ALSA uses hardware range of 0-31.
THus: -
OSS VOL=0
OSS VOL++
ALSA VOL stays at 0
OSS READ VOL, = 0;
It should work. We have correction for this case in snd_mixer_oss_conv1().
At Thu, 22 Jan 2004 12:49:07 +0100,
Mario Loritz wrote:
Hello List,
Since about Alsa version 0.9.8, the compilation of the alsa-driver for
the Sound Blaster AWE (non-pnp) results in a non-usable driver.
The driver fails to load with a message about a symbol error.
(Sorry, lost the
Jaroslav Kysela [EMAIL PROTECTED] writes:
[EMAIL PROTECTED]:~/alsa/alsa-lib/test make pcm
[...]
[EMAIL PROTECTED]:~/alsa/alsa-lib/test ./pcm
[...]
Using transfer method: write
So, what's your problem?
Notice that I relinked pcm dynamically to make it run.
However:
Florin Andrei wrote :
Anyone using the latest RME HDSP 9632 driver in ALSA, while also
using
the expansion cards? I mean, the newer AI4S-192 and/or AO4S-192
which
are required to get the 192kHz sampling on all analogs.
I have a 9632 now and also the 4 port analogue expansion
Hi,
i tried the pcm test program from the alsa-lib test program and it fails
for quite a few transfer modes... Before i go into details on that i
have to say that everything else i use alsa for works very nicely:
playing music via xmms' alsa plugin; watching movies with mplayer and
the alsa9
I haven't had time to try and get any sound out of it yet! However, it
is
detected correctly in the mixer, and the driver thinks that there are 4
extra channels. I need to get some jack socket convertors to get some
sound
out, but will let you know.
Please do so, thanks.
Hi Thomas,
Hi. I would like to use a Shuttle An50R which supports the Athlon 64
under Linux, but their sound chip is an ac97 audio Realtech. What
module would support such a beast or is it not possible to use ALSA
with that chip?
Thanks.
--
John Covici
[EMAIL PROTECTED]
On Wed, 21 Jan 2004, Ferenc Wagner wrote:
Hello!
$ ./pcm
Playback device is plughw:0,0
Stream parameters are 44100Hz, S16_LE, 1 channels
Sine wave rate is 440.Hz
Using transfer method: write
ALSA lib pcm.c:1876:(snd_pcm_open_conf) symbol _snd_pcm_plug_open is not
The Realtek ALC650 rev 3 chip, in my Shuttle SB62G2, is supported by the
intel8x0 driver.
HOWEVER, and I have a headache from it at this very moment, I've just
learned that the driver does not support anything but the front L and R
channels for output.
Can anyone tell me what is involved in
5.1 Audio works fine on my ALC650 rev 3 chip.
I have a Intel ICH5 chip controlling it.
Try my speaker-test program from
http://www.superbug.demon.co.uk/speaker-test/
Cheers
James
John W. Cocula wrote:
The Realtek ALC650 rev 3 chip, in my Shuttle SB62G2, is supported by the
intel8x0 driver.
Hi James,
It was your program that further confirmed that it does not work for me!
$ ./speaker-test -Drear -c 2
speaker-test 0.0.3
Playback device is rear
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440.Hz
ALSA lib pcm.c:1812:(snd_pcm_open_conf) Invalid type for PCM
I've got an ABit MAX-3 with the ALC650 chip controlled by the Intel ICH5
(R) as well. Playback through the front channel with ALSA works fine.
My problem is that the motherboard has 5 1/8th inch mini jacks on the
back, and two of those can be configured as either input or output.
One may be
Hello!
$ ./pcm
Playback device is plughw:0,0
Stream parameters are 44100Hz, S16_LE, 1 channels
Sine wave rate is 440.Hz
Using transfer method: write
ALSA lib pcm.c:1876:(snd_pcm_open_conf) symbol _snd_pcm_plug_open is not defined
inside (null)
Playback open error: No such
On Wed, 2004-01-21 at 12:25, Tommi Sakari Uimonen wrote:
...
[EMAIL PROTECTED] thoffman]$ cat /proc/asound/pcm
01-00: ICE1712 multi : ICE1712 multi : playback 1 : capture 1
Shouldn't there be separate devices for the analog SPDIF inputs and
outputs? If not, how do I send different
I will try it again and document exactly which apps and what my setup is.
Sorry for the vague problem report... In the meantime I'm actually using
the PAD card for general duties (ie watching TV)
Hi Thomas,
I successfully watched a surround 5.1 film tonight using the 9632!! Wahey! Thanks a
Does anyone have some rough sample code to do sample perfect recording and playback
under alsa? Purpose is a program to do impulse
response measurement of speakers and rooms.
In a similar vein, I can see how to play two channel sound through a device, but could
someone please point me towards
On Thu, 2004-01-22 at 07:06, Ed Wildgoose wrote:
Florin Andrei wrote :
Anyone using the latest RME HDSP 9632 driver in ALSA, while also
using
the expansion cards? I mean, the newer AI4S-192 and/or AO4S-192
which
are required to get the 192kHz sampling on all analogs.
I
Thanks for the tip. I tried your suggestion, but it doesn't work for
me. My .asoundrc now has this in it:
pcm.maudio_analog {
type hw
card 1
device 0
}
pcm.maudio_spdif {
type plug
ttable.0.8 1
ttable.1.9 1
slave.pcm {
On Thu, 2004-01-22 at 14:02, Tommi Sakari Uimonen wrote:
Thanks for the tip. I tried your suggestion, but it doesn't work for
me. My .asoundrc now has this in it:
(snip)
It should be -D maudio_spdif, so lose the plug: and it will work. I think
the analog should also work without plug.
It should be -D maudio_spdif, so lose the plug: and it will work. I think
the analog should also work without plug.
Thanks! That did it, mostly... I now can play sound through the SPDIF!
The analog doesn't work without plug, I get an error aplay:
set_params:827: Sample format non
In case the proposal is accepted and nobody has connections to the
maintainers of kernel.org I would volunteer to ask the bugzilla.kernel.org
maintainer to add a new Category Sound with a small number of Components
(suggestions?).
I have asked the maintainer of bugzilla.kernel.org and he
[EMAIL PROTECTED] wrote:
Has anyone been able to setup a Philips Sonic Edge 5.1 Soundcard
in Alsa yet?
Not AFAIK.
It depends on what chip it uses. It would be interesting to know what
lspci says about it.
I guess it's some proprietary chip which nobody knows anything about.
Regards,
Has anyone been able to setup a Philips Sonic Edge 5.1
Soundcard in Alsa yet? [...] it is not on the list of currently
supported hardware.
It is a cheap and widely available card however,
at least here in the UK, and was wondering if anyone
was working on support.
Did you ask Philips?
23 matches
Mail list logo
