On 5/7/06, Bartlomiej Muryn <[EMAIL PROTECTED]> wrote:
Hi list,
I am new here and obviously because I have some question :)
The issue concerns following card:
Creative Labs SoundBlaster Live! USB (External) model: SB0490
All problem and questions are in this post:
http://forums.gentoo.org/view
On Mon, 2006-05-08 at 21:22 +0200, Francesco Peeters wrote:
> Lee Revell schreef:
> > On Mon, 2006-05-08 at 21:00 +0200, Francesco Peeters wrote:
> >
> >>I have tried several versions of asoundrc files, but whatever version
> >>I use, I do not get softvol in the OSS emulation.
> >
> >
> > This
Pete wrote:
Lee Revell wrote:
On Sat, 2006-05-06 at 19:50 +0200, Pete wrote:
Lee Revell wrote:
On Sat, 2006-05-06 at 17:05 +0200, Pete wrote:
hello again ;)
it works fine, but is it also possible to set it for mic-i
On Mon, 2006-05-08 at 21:22 +0200, Francesco Peeters wrote:
> Ah, I misunderstood then...
>
> I tried aoss, but MythTV doesn't seem to work correctly using aoss,
> but I'll test again...
>
I've just asked on the mythtv-dev list when they plan to add native ALSA
support.
Lee
-
Dear friends,
I am installing linux on a TARGA 856 WA MT34 notebook.
The audio card is not recoignised by lspci, but Mandriva
Control Center does. recognise it as a SB Azalia 450 HD
Audio (that is High Definition Audio).
The module is apparently snd_hda_intel.
Nevertheless, the modem, who is
(please don't top-post)
Samuel Theobald wrote:
> When I try that method (same with using the surround40 type) it all starts
> up fine, before giving the error message:
>
> ALSA: poll time out, polled for 4356270 usecs
Does it work when you run aplay and arecord at the same time?
Regards,
Cleme
=== On Sunday 07 May 2006 17:11, Christoph Anton Mitterer wrote: ===
Hi.
Additionally to my problems with the onboard sound chip that I've reported in
another post,.. I'm think about buying a 2nd soundcard for my computer an afaik
the TerraTec Aureon 7.1 soundcards are very good cards.
Ac
Dear friends,
I am installing linux on a TARGA 856 WA MT34 notebook.
The audio card is not recoignised by lspci, but Mandriva
Control Center does. recognise it as a SB Azalia 450 HD
Audio (that is High Definition Audio).
The module is apparently snd_hda_intel.
Nevertheless, the modem, who is
Hi All,
I am new to alsa plugins, as previous systems I had 'just worked'(tm).
I now have a SIS based MoBo (PCChips M863G) with a built-in soundcard
based on the SI7012/CMI9761. The card has a known issue in that there's
no HW mixer for Master or PCM.
The PCM is either ON or OFF, and Master
Lee Revell wrote:
On Sat, 2006-05-06 at 21:21 +0200, Pete wrote:
music, videos and sounds in games are upmixed!
but my turntables are connected to the mic-in of my pc and the sound
of the mixer is (of course) stereo!
and i want, that this sounds are upmixed too!
i just turned on "
On Sat, 2006-05-06 at 18:27 -0300, Juan Carlos Castro y Castro wrote:
> 4) Have the resulting virtual soundcard usable via OSS, by way of the
> existing kernel emulation. Would defining it in /etc/alsa.conf
> instead
> of my home dir help?
Cannot work. Nothing you do to and ALSA config file ha
Hello,
I have an ICE1712 based card (Terratec DMX6Fire) in my AMD64. When using
the alsa-driver (1.0.10 or 1.0.11) with Gentoo I get the following error
in dmesg:
ALSA sound/i2c/cs8427.c:98: unable to send register 0x7f byte to CS8427
ALSA sound/i2c/cs8427.c:221: unable to find CS8427 signatu
On Tue, 2006-05-09 at 01:41 +0200, Christoph Anton Mitterer wrote:
> Lee Revell wrote:
> > Try ALSA 1.0.11, many bugs have been fixed since 1.0.11-rc2
> Ok,.. is it going to be part of 2.6.17?
>
> >> First of all does this chip support hardware mixing and full duplex?
> > Hardware mixing no, full
Please don't hit me over the head. I'll freely admit I'm dense. I
couldn't make heads or tails of the .asoundrc documentation (or the many
other links I found on the Web) if my life depended on it. I want to
create a virtual soundcard that is actually a file.
Eventually I was able to move away
hi,
I have been doing some tests and it appears that version 1.0.10 of alsa
driver and lib are better than 1.0.11 with my configuration :
-> With alsa drivers and library 1.0.11, on the kernel 2.6.13-15.8-smp
(from a SuSE distro), I get many xruns when I start a client (such as
Qjackctl or fst) up
I've just seen that the TerraTec Aureon 7.1 PCI should be comptaible with PCI-X
3,3 V, too.
So same questions (does anyone know if it supports true hardware mixing and true
full duplex) apply too.
However, I'd still prefer the Aureon 7.1 Universe, but unfortunately it seems
that this card does no
Hello,
I am running FC4 and am trying to compile alsa-utils.
When it gets to alsamixer, I get the same error
referenced on your bug tracker, however it was
described as _not_ being a bug, but rather a missing
rpm. Can you please post what rpm was missing on your
system? I can't seem to figure t
Hi Lee,
The same problem occurs whether I try using different capture/playback devices. (still 2-in, 4-out)
I have tried (capture/playback):
hw:0/quad
hw:0,0/quad
hw:0/four_and_two
hw:0,0/four_and_two
I even created a ctl & pcm for surround40 and surround51, but still no luck, it always returns w
Lee Revell wrote:
> On Sun, 2006-05-07 at 14:44 +0200, Christoph Anton Mitterer wrote:
>> pcm.dsp0
>> {
>> type plug
>> slave.pcm "output"
>> }
>
> Recording via the OSS API with aoss will not work in full duplex as you
> have set the slave PCM to "output". Try changing that to "duplex".
Doe
Lee Revell wrote:
> Try ALSA 1.0.11, many bugs have been fixed since 1.0.11-rc2
Ok,.. is it going to be part of 2.6.17?
>> First of all does this chip support hardware mixing and full duplex?
> Hardware mixing no, full duplex yes
What is the benefit of hardware mixing at all? Of course I understan
On Mon, 2006-05-08 at 15:52 -0500, Mark Tilford wrote:
> Attempting to follow the directions in the below listed file
> eventually gave the result:
>
> #modprobe snd_sbawe
> FATAL: Error inserting snd_sbawe
> (/lib/modules/2.6.16.4/kernel/sound/isa/sb/snd-sbawe.ko): No such
> device
> FATAL: Error
Lee Revell schreef:
On Mon, 2006-05-08 at 21:22 +0200, Francesco Peeters wrote:
Lee Revell schreef:
On Mon, 2006-05-08 at 21:00 +0200, Francesco Peeters wrote:
I have tried several versions of asoundrc files, but whatever version
I use, I do not get softvol in the OSS emulation.
This c
Attempting to follow the directions in the below listed file
eventually gave the result:
#modprobe snd_sbawe
FATAL: Error inserting snd_sbawe
(/lib/modules/2.6.16.4/kernel/sound/isa/sb/snd-sbawe.ko): No such
device
FATAL: Error running install command for snd_sbawe
Running lsmod after that appar
On Mon, 2006-05-08 at 21:22 +0200, Francesco Peeters wrote:
> Lee Revell schreef:
> > On Mon, 2006-05-08 at 21:00 +0200, Francesco Peeters wrote:
> >
> >>I have tried several versions of asoundrc files, but whatever version
> >>I use, I do not get softvol in the OSS emulation.
> >
> >
> > This
Lee Revell schreef:
On Mon, 2006-05-08 at 21:00 +0200, Francesco Peeters wrote:
I have tried several versions of asoundrc files, but whatever version
I use, I do not get softvol in the OSS emulation.
This cannot be made to work for the in-kernel (/dev/dsp) OSS emulation.
Your only option is
On Mon, 2006-05-08 at 21:00 +0200, Francesco Peeters wrote:
> I have tried several versions of asoundrc files, but whatever version
> I use, I do not get softvol in the OSS emulation.
This cannot be made to work for the in-kernel (/dev/dsp) OSS emulation.
Your only option is to run those apps wit
(Resending as there was a problem subscribing earlier...)
Hi All,
I am new to alsa plugins, as previous systems I had 'just worked'(tm).
I now have a SIS based MoBo (PCChips M863G) with a built-in soundcard
based on the SI7012/CMI9761. The card has a known issue in that there's
no HW mixer for
Lee Revell wrote:
On Fri, 2006-05-05 at 18:45 +0200, Pete wrote:
hey you 2 ;)
Yes, like KDE Apps or Browser Plugins ... maybe its possible, but
it's
more confortable to set it as default!!
thanks lee, i'll try it tomorrow ;)
nice weekend,
pete
Sounds like you need OSS
Lee Revell wrote:
On Fri, 2006-05-05 at 18:45 +0200, Pete wrote:
hey you 2 ;)
Yes, like KDE Apps or Browser Plugins ... maybe its possible, but
it's
more confortable to set it as default!!
thanks lee, i'll try it tomorrow ;)
nice weekend,
pete
Sounds like you need OSS
On Sun, 2006-05-07 at 14:44 +0200, Christoph Anton Mitterer wrote:
> pcm.dsp0
> {
> type plug
> slave.pcm "output"
> }
Recording via the OSS API with aoss will not work in full duplex as you
have set the slave PCM to "output". Try changing that to "duplex".
Also try removing the .asoundrc e
On Sat, 2006-05-06 at 17:05 +0200, Pete wrote:
>
> hello again ;)
> it works fine, but is it also possible to set it for mic-input too? :D
> would be nice ...
> greets, peter
Not in a generic way - this would require hardware support, or you have
to do it in software, but not at the ALSA level
On Sun, 2006-05-07 at 14:44 +0200, Christoph Anton Mitterer wrote:
> Hi.
>
> My mainboard is a Tyan Thunder K8WE (S2895) (details can be found here
> http://tyan.com/products/html/thunderk8we.html and here
> http://tyan.com/products/html/thunderk8we_spec.html).
>
> It uses Nvidia nForce Professio
Hi.
My mainboard is a Tyan Thunder K8WE (S2895) (details can be found here
http://tyan.com/products/html/thunderk8we.html and here
http://tyan.com/products/html/thunderk8we_spec.html).
It uses Nvidia nForce Professional 2200 chipset which includes an AC97 compliant
soundchip.
My distribution is
Hi.
Additionally to my problems with the onboard sound chip that I've reported in
another post,.. I'm think about buying a 2nd soundcard for my computer an afaik
the TerraTec Aureon 7.1 soundcards are very good cards.
According to the kernel-docs I assume that at least the following two should be
Hi list,
I am new here and obviously because I have some question :)
The issue concerns following card:
Creative Labs SoundBlaster Live! USB (External) model: SB0490
All problem and questions are in this post:
http://forums.gentoo.org/viewtopic-t-460289.html
Does somebody have such a card and
Hello,
I havent sound yet. Now i have seen a new data, when i try play
music, everything is ok but no sound, in the dmesg i have seen this:
ACPI: PCI interrupt for device :00:1b.0 disabled
ACPI: PCI Interrupt :00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer
36 matches
Mail list logo
