://forum.mxlinux.org/viewtopic.php?t=80346
I would appreciate your help.
Sent with [Proton Mail](https://proton.me/) secure email.___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
correct for this by using pavucontrol to reduce the output volume from
each application to about 15% (-45 db)...
There was no setting or reset command in either alsa or pulseaudio to
correct this. I had to cold-boot the machine to return sound output to
normal.
The motherboard is a TRX40-based
Hello,
When I type "alsactl restore", it does not load the driver state.
Steps to reproduce:
1. Open a first terminal dedicated to alsa-mixer
2. Open a second terminal where you will type the following commands
3. In the first terminal, press F4, set the audio volume for captu
he right direction.
>
> Best regards,
>
> Nico
>
> [2. application/octet-stream; alsainfo-alpine-6.4.3-1-edge]...
>
>
>
>
> Nico Schottelius via Alsa-user writes:
>
>> Hello,
>>
>> I have a curious problem on a Dell XPS 9320:
>>
>> When
-alpine-6.4.3-1-edge
Description: Binary data
Nico Schottelius via Alsa-user writes:
> Hello,
>
> I have a curious problem on a Dell XPS 9320:
>
> When loading Ubuntu with kernel 5.19.0-32 on it, it selects the
> sof-soundwire subsystem and sound works.
>
> When I load
[0]
https://www.nico.schottelius.org/temp/xps-9320/alsa-info.txt.FyT0oV3eoH
https://www.nico.schottelius.org/temp/xps-9320/config-alpine-6.1.38-5-lts
https://www.nico.schottelius.org/temp/xps-9320/aplay-l-alpine-lts
[1]
https://www.nico.schottelius.org/temp/xps-9320/alsainfo-ubuntu
https://www.nico.schottelius.org/tem
Hello,
I have a problem with my Realtek ALC236 sound card and I don't know if Alsa is
to blame.
I use a little program called "vlfrx-tools" to record audio with my laptop's
external microphone input.
Since a few days Alsa (?) uses the internal microphone instead of the external
reasons you sent them to us and for tracking how
effectively we respond to your requests.
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
For USB audio devices ("USB Audio Class 2" / UAC2 in my case):
Does ALSA expose an interface for controlling "feature units" or "effect units"?
I'm building a UAC2 device.
It has a feature unit currently.
The "volume" and "mute" control
Good evening,
I have a USB DAC from Micromega: a "MyDAC".
It used to work flawlessly using both ALSA & PulseAudio. But since a month or
two, I have these problems preventing it to emit any sound:
- in dmesg, I have :
usb 1-2.1.3: Product: MICROMEGA MYDAC
[1132337.43053
Thanks for all the info, guys! I have lots of things to try, now. I'll let you
know how it goes.
For now, bluez-alsa works, I still have Pipewire to test.
Regards,
Zala
--- Original Message ---
Le dimanche 26 juin 2022 à 09:58, Stuart Longland
a écrit :
> On Wed, 22 Jun 2022
On Wed, 22 Jun 2022 11:45:22 +
Zala Pierre GOUPIL via Alsa-user wrote:
> I don't know which compilation option is missing this time but I have
> a problem accessing a Bluetooth headset: I can pair and trust it but
> the only connection to it that is proposed to me is through the
of the headset.
Needless to say that no sound is produced here.
Would you have any ideas about this subject guys, please?
Thanks a lot & Regards,
Zala
---
Je n'aime pas seulement ma vie, mais aussi celle des autres.
(Blade Runner)___
Alsa-user mai
gards,
Zala
--- Original Message ---
Le vendredi 3 juin 2022 à 08:07, Paul Menzel a écrit :
> Dear Zala,
>
>
> Am 03.06.22 um 01:46 schrieb Zala Pierre GOUPIL via Alsa-user:
>
> > I have an Intel Comet Lake-based processor with an integrated HDMI
> > port in
. No way.
Here is the ALSA report as provided by alsa-info_alsa-info.sh;
http://alsa-project.org/db/?f=459e652de3f8f195ebb2a57e0324f313b14e49d2
Thanks a lot in advance guys,
Zala GOUPIL
---
Je n'aime pas seulement ma vie, mais aussi celle des autres.
(Blade Runner
azkano
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinf
Hi all,
I'm currently having issues with my speakers on a Chromebook running the
MAX98360A DAC.
director@DRIFTWOOD:~$ aplay -D hw:sc7180rt5682max,1 --dump-hw-params
/usr/share/sounds/alsa/Front_Center.wav
XDG_RUNTIME_DIR (/run/user/0) is not owned by us (uid 1000), but by uid 0!
(This could
or resource busy
Is some kind ALSA guru able to tell me if there is a change I can make
to my .asoundrc file that will allow me to have the convenience of my
previous setup of being able to have multiple source and destination
devices without needing to use extra software?
Thanks,
Phil.
.asoundrc
Jitsi (which can record to my DropBox account) but
when I do this CLI command as well:
arecord -D hw:0,0 -f S32_LE -c 2 ttt.wav
I get this result:
arecord: main:831: audio open error: Device or resource busy
Is some kind ALSA guru able to tell me if there is a change I can make
to my
HI,
Are there any RME 802 drivers available? And is there a replacement option for
Totalmix FX?
Best Regards
Mika kilpi
Securely sent with Tutanota.
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists
Dear alsa users,
We are looking for a replacement card for PCI(e) audio that we are using
in our linguistics laboratory. We have been quite happy with the older
ASUS Xonar D2 pci and ASUS Essence STX II PCIe cards. Unfortunately,
these are out of stock in the Netherlands, I don't know whether
Dear community,
I am currently controlling the speaker/headset using the ALSA library, like
aplay and arecord.
As the speaker/headset is connected through USB port, I am wondering does ALSA
support HID communication to the speaker/heaset?
Thanks!
Best regards,
Hui
Dear Alexandre,
Thank you for your suggestion!
I found the problem is the FIFO can only be read by one process instead of
multiple process, and I have changed to use command "tee" to implement it.
Best regards,
Hui
From: Alexandre Bouillot
Sent: 06 April 2021 11:00
To: Zhou, Hui
"aplay -D "speaker2" audio.wav", the audio in two
speakers becomes intermittent.
But there is no problem when I only play on speaker1.
Could anyone help me on this?
Thanks!
Best regards,
Hui
_______
Alsa-user mailing list
Alsa-user@l
!!
!!ALSA Information Script v 0.4.65
!!
!!Script ran on: Wed Mar 24 14:52:51 UTC 2021
!!Linux Distribution
!!--
Red Hat Linux release 8.0 (Psyche) Red Hat Linux release 8.0 (Psyche)
!!DMI Information
outputs to the ones at the daughter card...
Thanks for reply and greetings from Italy
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Hi all,
With which version of Linux kernel and ALSA is Pioneer DJ DJM-900NXS2
over USB fully supported?
I am not sure in which release is:
https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git/tree/sound/usb/mixer_quirks.c#n2825
and
https://git.kernel.org/pub/scm/linux/kernel/git
Good Day @all !
I can easily record and play microphone sound using
arecord --vumeter=mono --device="default:CARD=PCH" -f cd rec-test-mic.wav
aplay --vumeter=mono --device="plughw:0,0" rec-test-mic.wav
Now i wanna play sound to my laptop speakers/headphones using
James Cloos wrote:
> CL> pcm.!default {
> CL> type asym
> CL> playback.pcm "plug:hdmi:0,0"
> CL> capture.pcm "plughw:1"
> CL> }
>
> ALSA lib
> /var/tmp/portage/media-libs/alsa-lib-1.2.4/work/alsa-lib-1.2.4/src/conf.c:5084
playback.pcm "plug:hdmi:0,0"
capture.pcm "plughw:1"
}
Regards,
Clemens
_______
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
y occupied by another
device.
> The keyboard seem to send raw midi messages in a stream, but Alsa does
> not translate them in Sequencer events.
Strange. This should happen automatically, especially if the sequencer
device (port 20) is there.
Does the count in /proc/asound/card1/mid
format that your hardware supports.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Fernando Carello wrote:
> Problem: when I connect my MIDI USB keyboard (GarageKey), it is
> correctly detected, but I don't receive MIDI messages from it.
>
> No events with asqedump: :-(
Try with "amidi --dump --port hw:1".
Do other USB MIDI devices (or USB devices)
I've been building/using my own Linux distro for 10-15 years following
linuxfromscratch.org. My most recent build is from a few weeks ago based
on kernel 5.9.8. Something very strange happened today. I've been
essentially using the same ALSA/PulseAudio configuration for years and
all has been
Express Gigabit Ethernet
Controller (rev 15)04:00.0 Non-Volatile memory controller: ADATA Technology
Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive (rev 03)
+++
Any ideas? many thanks,
RW
___
Alsa-user mailing list
Alsa-user
dge on the D2X card is not known to have such problems.
Please show the output of "lspci -tvv".
Regards,
Clemens
_______
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Jeff Tchang wrote:
> WARNING ***
> Warning! aplay uses ALSA emulation instead of the native OSS API
This message shows that your system is set up to use not the ALSA
kernel drivers but the OSS drivers.
> I have an embedded system with
i's USB controller has limited bandwidth, and its
driver is not able to distribute all of it among multiple streams.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
hopping. What goes out to system:playback_1 in jackd
ends on channel 1, 9 or 17 in the interface. Same for system:playback_2.
I can force a hop when changing jackd's buffer size on the fly with
jack_bufsize.
One user reports this issue with ALSA clients, too, so it's probably no
jackd issue.
Since I
ding always uses channels.
Please show the contents of /proc/asound/card2/stream0.
Regards,
Clemens
_______
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
I have two virtual device pointing to same Alsa card ,with different bindings
When audio played on both device [dmix_4_channels and dmix_2_channels] in
parallel. Audio played on dmix_2_channels is getting corrupted.
Validated with alsa version : 1.2.3
Please let me know how to make it work
D. R. Evans wrote:
> Many functions say about the return value:
> 0 on success otherwise a negative error code
>
> Where is the documentation for the various possible "negative error code"s?
<https://www.alsa-project.org/alsa-doc/alsa-lib/group___error.html> has a
back card and play to
the actual device.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
d problems:
- microphone needs to be switched back and forth in alsamixer to work
- audio is sometimes very distorted for both input and output
Then there is also specific apps which trigger distortion in the card
like Vircadia.
Greetings
___
Alsa-user mailing
Robert Bielik wrote:
> I’d like to know if there is any way to get the following sound chain through
> ALSA:
>
> Mediaplayer -> dmix -> LADSPA -> plughw:0,0
The dmix plugin plays shared-memory tricks with the ring buffer and therefore
requires to run on top of a hw device.
0x81, wValue =
0xc00, wIndex = 0x1300, type = 4
--
The vaccine is a LIE.
Powers are not rights.
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Hello everyone!
After installing the nvidia 340 driver, my sound via HDMI stops working.
I tried using HDA Analyzer and alsamixer for fix, but without success.
Can anyone help me fix the problem?
In the attachment, files with the output alsa-info before installing the driver
when the sound
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Stefan Sauer wrote:
> If I use my pixel c tablet, the alsa device is recognized (it shows
> up in /proc/asound/ and also creates a midi0 entry)
Does it show up in the output of "amidi -l"?
Is the ID 5209 or 520a? Your logs show both.
Nils wrote:
> I am trying to get a Rodecaster Pro working, and see it in lsusb, but
> can't get it to work with Alsa.
>
> [ 3490.377201] usb 1-7: parse_audio_format_rates_v2v3(): unable to retrieve
> number of sample rates (clock 1)
This device appears not to be completely class c
Maurizio Mileto Principale wrote:
> Can you tell me if ALSA plans to convert the AE-9 drivers for Linux in the
> near future?
There does not exist any public information about Creative hardware.
Linux drivers are written by Creative. Or not, when they don't feel like it.
Regards,
C
Jaime wrote:
> Can I use amidi to send this sysex message to linuxsampler?
No; amidi works only with raw MIDI ports.
Load the snd-virmidi module to get a virtual device that you can
connect to linuxsampler.
Regards,
Clemens
___
Alsa-user mail
Peter P. wrote:
> Can I set pcm device names per application as defaults?
If the application does not allow you to set the ALSA device name,
you have to replace the device definition that the application used
(probably "default").
It would be possible to create a device definiti
ards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Christopher Lansing wrote:
> I can't record from "Capture 1".
How many devices show up in the output of "arecord -l"?
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
D. R. Evans wrote:
> Clemens Ladisch via Alsa-user wrote on 2/20/20 1:56 PM:
>> Please show the output of "amixer -c0 scontents".
>
> Output attached (it seemed a bit long to put in the body of the e-mail).
Looks OK.
Try changing the Front Panel Audio Enable jum
D. R. Evans wrote:
> Clemens Ladisch via Alsa-user wrote on 2/20/20 12:48 AM:
>> Please show the output of "amixer scontents".
>
> Simple mixer control 'Master',0
> Capabilities: pvolume pswitch pswitch-joined
> Playback channels: Front Left - Front Right
configured, it's possible
that nobody knows what that would be.)
Regards,
Clemens
_______
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Ethan Grizzle wrote:
> Is it being worked on at all, or is it not a priority at the moment?
Neither Creative nor anybody else is writing a driver.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
ht
Harald Heigl wrote:
> if one of my devices (bluetooth headphones turned off) is
> failing, the whole configuration (another bluetooth headphone+hdmi) is
> failing. Is there an easy way to handle alsa failures of one device
> gracefully?
Not with ALSA plugins.
This should
configuration, but I cannot figure how to
> automatically route those streams.
The asound.conf definitions are used when a program accesses a PCM stream.
Without a program, nothing happens.
You have to use a tool like alsaloop.
Regards,
Clemens
__
Alfred Ganz wrote:
> I have an old Skype phone that I have used under Centos-6 that I have not
> been able to get to work under Centos-7 and Centos-8. I have tested it
> under Centos-6 (2.6.32-754.6.3.el6.i686 #1 SMP) with:
> aplay -D usb-phone -t wav /usr/share/sounds/alsa/Fron
Alfred Ganz wrote:
> HW Params of device "usb-phone":
What are the capabilities of the actual hardware ("hw:1")?
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
wie Vital is reported to be expensive but good.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
ly work ("cat /dev/snd/pcmC0D0c"), i.e.,
is the resulting error something else than "No such file or directory"?
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Rich Morin wrote:
> I'd like to set up ALSA to use the host's audio output system.
You have to configure the VM to provide a (virtual) sound hardware device
(https://www.virtualbox.org/manual/ch03.html#settings-audio), or to pass
through a USB audio device from the host.
Regards,
Clem
/snd/pcmC0D0c", O_RDWR|O_NONBLOCK|O_CLOEXEC) = -1
> ENOENT (No such file or directory)
pcmC0* is card 0, a different device.
Did you really use "plughw:1"? Did you make any modifications to the "hw"
or "plughw" definitions in one of the ALSA configuratio
1D0c
Then I cannot explain the "No such file or directory" message.
What is the output of "strace -e open arecord -D plughw:1 test.wav"?
Regards,
Clemens
_______
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Jesse Hathaway wrote:
> $ arecord -D plughw:1 test.wav
> arecord: main:828: audio open error: No such file or directory
What is the output of "arecord -l"?
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourc
Jesse Hathaway wrote:
> I just purchased a Kingston HyperX Amp USB soundcard[1]. The microphone input
> does not work correctly in Alsa
What exactly does not work?
What happens when you run "arecord -D plughw:1 test.wav"?
> When I try to choose it with alsamixer
alsamix
assistance!
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
f...@interkatz.de wrote:
> according to hda-verb, the supported capturing parameters are 16/20/24
> bits per sample
These are the sample formats that are transmitted on the HDA bus.
> Alsa-lib, on the other hand, claims that the supported formats (for
> `hw:0,0` in this case) are S16
Hans Malissa wrote:
> Can anyone tell me how to configure CMUS to use the Fulla 3 or the internal
> sound card, no matter how ALSA sorts the cards?
ALSA itself has no built-in mechanism to dynamically select a fallback device.
I'd recommend to use PulseAudio:
https://www.freedesktop.or
Hi all,
I just got a new USB sound card (Schiit Fulla 3,
https://www.schiit.com/products/fulla-1). It works great, and I'm using it to
play music through CMUS (https://cmus.github.io) on Arch Linux.
However, I can't seem to figure out how to tell ALSA which device to use as a
default. When
multi
...
}
}
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
actually uses your "default" device.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
'll have
to contact them at some point).
So, I have two problems:
* I can't get the microphone to works properly
* The sound output is only the right channel
(I don't know yet if ALSA plays a part here)
aplay -Ll output
leo@eggplant ~ $ aplay -Ll
de
Hi all / Takashi,
I saw Takashi has a patch for this question:
https://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg25548.html
But I still have this issue when I use “hooks” and “dmix” plugin in my
asound.conf. I am using alsa-lib and utils 1.1.9.
Aplay –v xxx.wav from one console
Brian J. Murrell wrote:
> # aplay -l
> aplay: device_list:272: no soundcards found...
Are the sound drivers loaded? (see the output of "lsmod")
Are the devices accessible? (see "ls -l /dev/snd/")
Regards,
Clemens
_______
Alsa-u
lease
try to have all snd* modules compiled in, or none.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
re it, this change can be made permanent.)
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Stefan Sauer wrote:
> when using multi channel audio interfaces, it would be awesome to be
> able to label the ports to make it easier to select the right (pair of)
> channels in the software.
ALSA has no mechanism to associate names to multiple channels belonging to
the same P
I have audio stutters with an ALC892 Realtek Chipset on a B450 GAMING ELITE
board from Gigabyte. No issues with Windows.
After opening an issue and testing with a PulseAudio developer, he has
determined that the issue is not within PulseAudio, but on ALSA.
There are already two issues about
Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
What am I doing wrong? Can I configure ALSA so it can play mono file with
'hdmi:CARD=HDMI,DEV=2'?
If there is not enough information here, please tell me what else is needed.
Thanks
/proc/asound/card?/stream0.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
The "PCM Capture Source" control is currently set to "Mic"; try the others.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Luca Toldo wrote:
> Simple mixer control 'PCM Capture Source',0
> Items: 'Mic' 'Line' 'IEC958 In' 'Mixer'
Please try all settings.
Regards,
Clemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net
s _except_ the line input are enabled.
> I feel the problem is with the configuration in the sound/usb/quirks.c that
> are valid for the CM6206 but do not differentiate for the LX
Those settings should not affect the line input.
Regards,
Clemens
____
Jacob Juul Klejs Kolding wrote:
> All I know is that the main chip is an FPGA.
>
> Are there any tools for Windows that can snif the communication?
For PCI(e), this cannot be done in software.
Regards,
Clemens
___
Alsa-user mailing list
lemens
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
I believe what I need to do is just open the open the pcm as usual, and then
setup my buffers as appropriate and pass them to snd_pcm_writen() as an array
of pointers, one per channel.
___
Alsa-user mailing list
Alsa-user@lists.
(….,”Digital1”,…) then I do get
audio in the expected places. I just can’t seem to do it simultaneously.
What’s the correct way to write PCM to specific USB endpoints simultaneously?
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https
found
Default PCM:
rates [0x70]: 32000 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
When will support for 24/32 bit and 96/192KHz audio playback be
available for this GPU?
Thanks.
___
Alsa-user mailing list
Alsa-user
Dennis Mungai wrote:
> One thing I've never been able to get to work, even with hdajackretask (
> https://fossies.org/linux/alsa-tools/hdajackretask/README), is the
> headphone jack.
We'd have to know how the hardware is wired up.
> The oddity here is that this Texas Instruments dev
for end users about output configuration, please let
me know.
--
Cheers, Saul
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Hello everyone, I'm new to both this list and to fiddling around with alsa, but
I have a problem I hope you'll be able to help me with. Basically, I have three
conference room-style microphones (or better said, microphones arrays) with 7
(namely 8, but one doesn't work) channels each. Here
gt; connected to the black surround port on the back of the card.
The channels are entirely separated in the hardware.
This is likely to be a problem with the connector (not plugged in all the
way?) or with the headphones.
Regards,
Clemens
___
Alsa-use
Kevin Smallman wrote:
> is that down to the hardware support provided by the kernel, or something
> like ALSA or OSS?
ALSA consists of three parts:
- the userspace library, alsa-lib;
- the ALSA framework in the kernel; and
- various ALSA drivers, also in the kernel.
The library can use
Robert Bielik wrote:
> I cannot get it listed with ALSA API function snd_device_name_hint.
This is undocumented; see the "hint" entries in the standard .conf files.
Regards,
Clemens
--
Check out the
1 - 100 of 222 matches
Mail list logo