hey all,
I have a m-audio delta 66 sound card and i'm running suse 10.2 on a ppc
g4. And i have great sound out of my tumbler sound card, built into to
mac, but my delta 66 sounds like the gnashing of teeth. nothing but
loud staticky noise. I had this happen once before running debian, but
it w
hey all,
I have a m-audio delta 66 sound card and i'm running suse 10.2 on a ppc
g4. And i have great sound out of my tumbler sound card, built into to
mac, but my delta 66 sounds like the gnashing of teeth. nothing but
loud staticky noise. I had this happen once before running debian, but
it w
On Tue, 24 Jul 2007 17:43:06 +0200
"Danny Ayers" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> By appearances, everything appears to be ok with my setup with a new
> Delta 66, I'm just not getting any sound out :-(
>
> With Hydrogen -> jack -> envy24control the level meters in
> envy24control (0.6)are bo
Hi,
By appearances, everything appears to be ok with my setup with a new
Delta 66, I'm just not getting any sound out :-(
With Hydrogen -> jack -> envy24control the level meters in
envy24control (0.6)are bouncing merrily.
I've seen mention of routing in envy24control, but trial & error there
has
I am looking to do multi-tracking on UbuntuStudio with Ardour and have a
Delta 66 card with the Omni i/o breakout box. The card is detected and
working but input from the Omni i/o show nothing. I am looking how to
enable the omni int array and looking for a recommended .asoundrc file
to use to
Debian SID, Kernel 2.6.5
Alsa 1.04, OSS-emulation, ice1712 as card0, via82xx as card1
I'd like to record from the dsp devices input from Omni i/o's "HW in
3+4" only which I can hear perfectly. In a previous posting it was
mentioned there has been a discussion on this task before but I couldn't
f
Greetings everyone.
I have an ASUS P4PE with its build in sound, and an M-Audio Delta 66. I
am running Redhat 9. I previously had both soundcards working with alsa
under RH8, but since then I have had no luck whatever.
I have downloaded and installed everything as per the instructions on
the we
Le Jeudi 12 Juin 2003 11:16, Allan Klinbail a écrit :
> Now that I have pretty much decided to give up the ghost on the intel8x0
> as a hardware patchbay seems to be a better option, (and I think the
> onbaord audio system may have shorted .., the driver now refuses to load
> all setting are as th
Don't answer this... I'll just use a pair of inputs for the audio out on
the patchbay.
On Thu, 2003-06-12 at 19:16, Allan Klinbail wrote:
> Okay,
>
> Now that I have pretty much decided to give up the ghost on the intel8x0
> as a hardware patchbay seems to be a better option, (and I think the
On Thursday 12 June 2003 11:16, Allan Klinbail wrote:
> Okay,
>
> Now that I have pretty much decided to give up the ghost on the intel8x0
> as a hardware patchbay seems to be a better option, (and I think the
> onbaord audio system may have shorted .., the driver now refuses to load
> all setting
Okay,
Now that I have pretty much decided to give up the ghost on the intel8x0
as a hardware patchbay seems to be a better option, (and I think the
onbaord audio system may have shorted .., the driver now refuses to load
all setting are as they previously were)
Has anyone got any suggestions reg
Hello -
My Delta/66 has four outs - currently I'm using the first two as the
usual left/right channels.
Would it be possible to run another audio program and send the output to
the other two channels, at the same time another program is using the
first two?
How would I do this using ALSA?
H
On Wed, Jan 08, 2003 at 05:32:00PM -0500, lloyd wrote:
>
> So should I just throw this $350 sound card away?
I wouldn't. I have one and it's worked well with most of the alsa 0.9 versions
I've tried.
I'd suggest reading this page in the ALSA Wiki but
it seems to only give you the index at the mo
So should I just throw this $350 sound card away?
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
___
Alsa-user
First a big thank you to all of the folks that responded to my
cry for help :)
I have bookmarked all the great sites you folks have
suggested looking at and there is certainly some great
information there.
To solve the problem I went back to the basics and set
everything back
hi fish, there was a lot of talk about these issues recently
(mid-september?)
on ardour-dev (and moving over to ardour-users eventually).
some comments from what I remember are below...
On Thu, Oct 03, 2002 at 01:06:29AM +0800, flat fish wrote:
> One thing I noticed is that under kde control pane
ch better. Almost no
xruns on two boxes.
With best regards,
Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of flat fish
Sent: Wednesday, October 02, 2002 10:06 AM
To: [EMAIL PROTECTED]
Subject: [Alsa-user] Delta 66 ticks and pops.
I have a Delta 66
I have a Delta 66 in an Abit BH6 board that gets ticks and
pops when playing mp3's and doing anything video like
dragging a window around or even selecting a message in
knews. Even having gaim pop up a message, no sound on,
may cause a tick or pop or stutter.
Mandrake 8.0 with the version
Yes I did get that message and have tried both the alsa mixer and the Envy
control mixer to unmute and raise the gain on all my channels.
They are unmuted and at full gain, including the master,
It seems I am getting an error message with aplay that states:
"Cant set Channel Parms"..
Whateve
On Fri, Mar 22, 2002 at 01:14:40PM -0500, rich man wrote:
>
> Sorry, I forgot to list my installed modules:
(snip)
During installation, you should have gotten a message that
ALSA drivers are muted by default. Did you check that?
Try installing envy24control from the alsa-tools package,
and use t
One last thing (I hope!), I just discovered the aplay utility and when I use
it to play a *.wave file I get the following error:
aplay route66
Aplay: version 0.5.10 by Jaroslav Kysela <[EMAIL PROTECTED]>
Using soundcard 'M Audio Delta 66 at 0xc400, irq 10'
Playing WAVE 'route66' : Signed 16-bit
Sorry, I forgot to list my installed modules:
Module Size Used byNot tainted
sr_mod 15160 0 (autoclean) (unused)
snd-seq-oss25600 0 (unused)
snd-seq-midi-event 3184 0 [snd-seq-oss]
snd-seq40880 0 [snd-seq-oss snd-
Hi,
I have been trying for a while to get a Midiman Delta 66 to work with the
alsa drivers.
I have tried various distributions all with the same results, the card loads
and looks fine (I think!) but I get no sound.
Currently I am using Mandrake 8.2 with the version of alsa that comes with
it
Hi
Thanks for that .. the ardour.rc example file for .asoundrc talks about
MIDI assignments and looks a little different from this.. I knwo the
delta series cards do not have midi involved in them at all.
However, thos who are familiar with my posts would understand that is
also highly importan
Hi
I've been scouring my ML archives for info about how to set up the
.asoundrc file. Specifically for a system with a Delta 66 and SBPCI 128
card installed.
This is for use with ardour
I can't seem to ascertain from the emails, or provided documentation
exactly how to configure this file.
N
Dear all,
I wrote a small howto for using the Midiman Delta 66 with
the Alsa driver. Its just a start, but maybe you find it
useful. If you are interested, look at
http://www-ft.ee.tu-berlin.de/~batke/software_en.html
Any comments are welcome.
Best regards
Jan-Mark
--
.- Dipl.-Ing. Jan-Mark
26 matches
Mail list logo
