Hi all,
I have a Tosh Satellite (P4 1700GHZ) with the i810 sound. The messages you quote are
normal. They appear in my dmesg output also BUT alsa works fine on my machine with
jack, xmms (any of: jack, alsa, oss emul), audacity (alsa portaudio V19, oss emul).
The key difference is that I am
Dave Williams wrote:
The problem is this: The kernel (Slackware's standard 2.4.22) doesn't
recognize the card when it boots. The command insmod fails. And
modprobe says there's no such device. This happens no matter how
carefully I specify the card options and parameters (which are in the
Hello ladies and gentlemen, I'm hoping for some assistance.
I've recently acquired Soundblaster MP3+ and now I'm having a hell of a
time getting dmixer to work properply.
Here's what's going on right now:
I can have multiple streams going at a time. In particular, I can have
xmms and mplayer
On Wed, 2004-04-28 at 06:46, Peter Zubaj wrote:
Hi,
aplay -D hw:0,3 - this newer worked on audigy (only on SB Live)
What you need is - unmute Audigy Analog/Digital Output Jack in
alsa mixer and make sure that no other program is using spdif device.
Hi.
It's definitely unmuted. Since it
Then check if IEC958 Optical Raw Playback Switch is muted.
spdif device works, because it atomatically sets these switches and
they are locked (you can change value in alsamixer, but has no
efect) if spdif device is in use.
Peter Zubaj
http://www.pobox.sk/
Here is the output from 'lsusb -v':
Bus 001 Device 005: ID 041e:3020 Creative Technology, Ltd
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass0 (Defined at Interface level)
bDeviceSubClass 0
IEC958 Optical Raw Playback Switch - it is used for AC3 pasthrough
should be muted - for oss emulation, midi playback, wave playback, ..
alias normal ussage
should be unmuted - for spdif blayback (Raw passthrough of AC3
stream through spdif, unaltered spdif playback) using spdif device.
IEC958
Julian Edwards wrote:
I just upgraded to v1.0.4 of the alsa drivers and I've lost my OSS sound
to the digital output on my Audigy 2. I can't make sense of this:
[EMAIL PROTECTED] ed]$ cat /proc/asound/devices
19: [0- 3]: digital audio playback
$ aplay -D hw:0,3
Simeon Penev wrote:
Am Dienstag, 27. April 2004 11:47 schrieben Sie:
Simeon Penev wrote:
how can i run all 6 channels of my Audigy 2 NX USB card using
usb 1?
6 channels * 3 bytes/sample * 96000 samples/s = 1728000 bytes/s
This is not possible with USB 1.
But how does it run
On Wed, 2004-04-28 at 15:08, Clemens Ladisch wrote:
Probably some mixer control(s) changed.
Yes they had, see the other mails in this thread.
Although, when I restart X (not a reboot, just X itself), the mixer
controls are reset back to the incorrect state. If I do an alsactl
restore it's
Hi folks,
I've been using my HDSP with reasonable successs, but just monitoring 8
chan output through the headphones. Now I've got it connected to my
Spirit 328 digital mixer and am having troubles. Basically, there
doesn't seem to be any kind of sync.
Initially, when I just had the ADAT
Ok, I can get the device to sync by setting the Clock Source to
AutoSync, but then I get all sorts of errors writing to the audio
device. It seems as though setting the device to sync as a slave breaks
all the OSS emulation.
EG.,
SNDCTL_DSP_SETFMT: Operation not permitted
and
Hi,
Clemens Ladisch [EMAIL PROTECTED] schrieb am 28.04.04 16:50:01:
Simeon Penev wrote:
Am Dienstag, 27. April 2004 11:47 schrieben Sie:
Simeon Penev wrote:
how can i run all 6 channels of my Audigy 2 NX USB card using
usb 1?
6 channels * 3 bytes/sample * 96000 samples/s =
What is wrong with the mixer of SB Live?
I didn't find any total volume control.
I cannot understand:
Why line out control called Wave Sur?
Why Master, PCM and Wave controls output only to my headphones?
What is the Wave control?
Agri
---
--- Radoslaw \AstralStorm\ Szkodzinski
[EMAIL PROTECTED] ha scritto:
Sorry for spamming you. I shouldn't have signed the
message,
it has changed all first tabs to tilde sign,
making it unusable to alsactl.
[...]
Thanks. I tried everything, but still it doesn't work.
I cannot hear anything
Alberto Mardegan wrote:
...
I cannot hear anything on the green jack, while others
work but are controlled byt the headphone slider in
alsamixer, while Master and PCM are uneffective.
So I tried kernel 2.6.5, but still no improvement. I
...
00:0c.0 Multimedia audio controller: Creative Labs SB
Hi!
I have a compaq presario R3000 laptop. The sound chip is atiixp, and I
had some serious problems until a bug was fixed a few days ago. Since
then the sound works in xmms only, and I still get many many error
messages in dmesg upon module loading.
Something I noticed in the boot is a
hello:
i am trying to get sound blaster live to come alive and having no luck.
the hardware, other than the soundblaster live! card is an asus a7v600 with
onboard lan and adi 1980 ac97 compliant audio CODEC (which is turned off in
the bios setup). the cpu is a AMD 2500+.
after installing the
18 matches
Mail list logo