Re: [Alsa-user] unsubscribe [EMAIL PROTECTED] please
[EMAIL PROTECTED] wrote: Hi, I still received lots of emails coming to me. Pls unsubscribe me thanks. Regards, Claude Yu ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user Sorry, we cannot unsubscribe you. You have to do it yourself. Just follow the instructions at the bottom of every email. e.g. Follow the https web link. ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] VIA 8233 in eMachines M6811
I've been having problems with certain software's (openal, artsd) ALSA output being transposed up ~1 tone. Today I figured out that it had to do with the dxs support, and eventually settled on dxs_support=5, which works perfectly. However, I think it's likely that the issue with transposition is a bug related to resampling of output to 48000, since it went away when dxs_support was set to 1,2, or 5 (I didn't try 4, and I really don't know what VRA is). So, two things: 1 - my soundcard works best with dxs_support=5, in my opinion2 - there are wierd issues either with resampling, or with the way openal and artsd output to alsa.Another issue is that while trying to fix the problem, I played with the rate plugin in /etc/asound.conf, and it didn't work at all with any of the offending apps. However, as I'm writing this, I just briefly tested the rate plugin with amarok-xine, and it works fine with slave.rate at both 44100 and 48000, assuming I didn't make a mistake configuring it.lspci -v00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) Subsystem: Rioworks Unknown device 2032 Flags: medium devsel, IRQ 9 I/O ports at 1000 [size=256] Capabilities: [c0] Power Management version 2lspci -nv00:11.5 0401: 1106:3059 (rev 50) Subsystem: 161f:2032 Flags: medium devsel, IRQ 9 I/O ports at 1000 [size=256] Capabilities: [c0] Power Management version 2 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] unsubscribe [EMAIL PROTECTED] please
James Courtier-Dutton wrote: [EMAIL PROTECTED] wrote: Hi, I still received lots of emails coming to me. Pls unsubscribe me thanks. Regards, Claude Yu ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user Sorry, we cannot unsubscribe you. You have to do it yourself. Just follow the instructions at the bottom of every email. e.g. Follow the https web link. ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user And you must reply to the unsub confirmation msg. -- Cheers, Gene ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Creative Audigy Platinum - problems with the mixer
Hello there! I have serious problem with my Audigy Platinum card. The alsamixer shows just few output channels: Line, CD, Phone, PC Speaker, Aux, Digital Out, External Amp. But my card have much more outputs, Aux 2, Line in 2, SPIDF in and out and headphones output (on the front panel). I need to get my headphones output working - it doesnt play :-( How to configure this? Alsa finds this card as Audigy 1 (SB0090). Thanks in advance -- Lukas Zapletal http://lukas.zapletalovi.com ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Is it possible to pre-amp output signal?
On Sun, 2006-06-18 at 12:18 +0200, Francesco Peeters wrote: Hi all, Is it possible to configure ALSA through asoundrc to pre-amp (increase volume) the master output signal? Probably not - softvol can only attenuate, it cannot amplify signals. If you have the volume at 100% it should be as loud as the hardware ios capable of. Maybe there is a software volume control or compressor in MythTV that can do this? I know mplayer has one. What sound card? Can you attach the output of amixer? Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Creative Audigy Platinum - problems with the mixer
On Sun, 2006-06-18 at 15:10 +0200, Lukas Zapletal wrote: Hello there! I have serious problem with my Audigy Platinum card. The alsamixer shows just few output channels: Line, CD, Phone, PC Speaker, Aux, Digital Out, External Amp. But my card have much more outputs, Aux 2, Line in 2, SPIDF in and out and headphones output (on the front panel). I need to get my headphones output working - it doesnt play :-( How to configure this? Alsa finds this card as Audigy 1 (SB0090). Did you try scrolling all the way to the right? Please post the output of amixer. Also the Audigy does not have a separate control for the headphones - it's controlled by Master (and the knob on the breakout box). Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
I first mentioned this echo problem while experimenting with the 2.6.16.18 kernel. The problem is even worse now. Audio is totally unusable. Although my PC hasn't hardlocked yet, it just might at some point in the future. I simply changed from the 2.6.16.1 kernel which works fine with ALSA to the 2.6.17 kernel which works terribly with ALSA and the Via VT8237 chipset. You ought to hear this sucker sing! The echo is horrendous. ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: VIA Technologies, Inc. K8M800 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- Latency: 8 Region 0: Memory at e000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] #08 [0060] Capabilities: [58] #08 [8001] 00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: c000-cfff Memory behind bridge: e800-e80f Prefetchable memory behind bridge: c000-dfff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 6001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d000 [size=256] Region 1: Memory at e811 (32-bit, non-prefetchable) [size=256] Expansion ROM at 2000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 6001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at d400 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 6001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32, cache line size 08 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at d800 [size=32]
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Sun, 2006-06-18 at 09:05 -0700, T.P. Reitzel wrote: I first mentioned this echo problem while experimenting with the 2.6.16.18 kernel. The problem is even worse now. Audio is totally unusable. Although my PC hasn't hardlocked yet, it just might at some point in the future. I simply changed from the 2.6.16.1 kernel which works fine with ALSA to the 2.6.17 kernel which works terribly with ALSA and the Via VT8237 chipset. You ought to hear this sucker sing! The echo is horrendous. This bug report is too vague. What exactly are you doing, and what exactly are the symptoms? Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
Lee - I don't know if I can explain it much better, but here's another attempt. ANY sound just echoes for several seconds almost like the problem is due to conflicting interrupts. If I play a brief tone ( 1 sec.), the tone will just echo for several seconds. Imagine listening to a longer segment of audio in this manner. The result is just a continuous jumble of echoes. Other users of similar hardware must be experiencing the same problem. I haven't done ANYTHING other than upgrade from the 2.6.16.1 kernel to the 2.6.17 kernel with a slightly newer (Hg) version of ALSA. Remember, this problem has been worsening throughout the life cyle of the 2.6.16.x kernels. HTH ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] OT: waveform analyzer and tuning aid
John Anderson wrote: Probably it's fmit (Free Musical Intrument Tuner). It shows waveforms, overtone analysis, and a bunch of other things. http://home.gna.org/fmit/ It is, thank you. jch ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Sun, 18 Jun 2006 13:54:48 -0400 Lee Revell [EMAIL PROTECTED] wrote: On Sun, 2006-06-18 at 11:39 -0700, T.P. Reitzel wrote: Lee - I don't know if I can explain it much better, but here's another attempt. ANY sound just echoes for several seconds almost like the problem is due to conflicting interrupts. If I play a brief tone ( 1 sec.), the tone will just echo for several seconds. Imagine listening to a longer segment of audio in this manner. The result is just a continuous jumble of echoes. Other users of similar hardware must be experiencing the same problem. I haven't done ANYTHING other than upgrade from the 2.6.16.1 kernel to the 2.6.17 kernel with a slightly newer (Hg) version of ALSA. Remember, this problem has been worsening throughout the life cyle of the 2.6.16.x kernels. HTH I think you are hitting a known bug that's caused not by ALSA but by a buggy PCI quirk for VIA chipsets. It's a regression introduced during the 2.6.16.x series. It has been discussed on LKML and should be fixed in the first 2.6.17 stable release. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user 2.6.17 is out according to http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17 . ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Sun, 2006-06-18 at 22:37 +0300, Sergei Steshenko wrote: 2.6.17 is out according to http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17 . I said the first 2.6.17 -stable release meaning 2.6.17.1. The bug was not found in time for 2.6.17. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Sun, 18 Jun 2006 15:42:55 -0400 Lee Revell [EMAIL PROTECTED] wrote: On Sun, 2006-06-18 at 22:37 +0300, Sergei Steshenko wrote: 2.6.17 is out according to http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17 . I said the first 2.6.17 -stable release meaning 2.6.17.1. The bug was not found in time for 2.6.17. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user Is there any automagical formula allowing to know which non-rc kernel is stable ? ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Is it possible to pre-amp output signal?
On Sun, June 18, 2006 16:46, Lee Revell said: On Sun, 2006-06-18 at 12:18 +0200, Francesco Peeters wrote: Hi all, Is it possible to configure ALSA through asoundrc to pre-amp (increase volume) the master output signal? Probably not - softvol can only attenuate, it cannot amplify signals. I was afraid you say that... If you have the volume at 100% it should be as loud as the hardware ios capable of. Maybe there is a software volume control or compressor in MythTV that can do this? I know mplayer has one. nope... MythTV uses whatever mixer it gets offered. I could (and will) test what happens if I use Xine or Mplayer to play a DVD to see if there is a difference in volume... What sound card? OnBoard SiS 741GX/964L based CMI9761A 6-channel audio Codec Can you attach the output of amixer? Sure: (note that the master is a dummy control, as the 'card' doesn't have hardware mixers) Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [on] Front Right: Playback 31 [100%] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [on] Front Right: Playback 255 [100%] [on] Simple mixer control 'Surround',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Surround Jack Mode',0 Capabilities: enum Items: 'Shared' 'Independent' Item0: 'Independent' Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [on] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [on] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 31 [100%] [on] Capture [off] Front Right: Playback 31 [100%] [on] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 31 [100%] [on] Capture [off] Front Right: Playback 31 [100%] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 31 [100%] [on] Capture [on] Front Right: Playback 31 [100%] [on] Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined cswitch cswitch-joined Playback channels: Mono Capture channels: Mono Mono: Playback [on] Capture [off] Simple mixer control 'IEC958 Capture Monitor',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958 Capture Valid',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958 Playback AC97-SPSA',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 3 Mono: 0 [0%] Simple mixer control 'IEC958 Playback Source',0 Capabilities: enum Items: 'AC-Link' 'ADC' 'SPDIF-In' Item0: 'AC-Link' Simple mixer control 'PC Speaker',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 15 [100%] [on] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 30 [97%] [on] Capture [off] Front Right: Playback 30 [97%] [on] Capture [off]
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
I am STILL getting this message from your ISP even though I have repeatedly filled out the form. Please do not mail me again until it's fixed or you have changed ISPs. [EMAIL PROTECTED]: 194.67.23.20 does not like recipient. Remote host said: 550 Access from ip address 216.158.38.3 blocked. Visit http://win.mail.ru/cgi-bin/support_bl?ip=216.158.38.3 Giving up on 194.67.23.20. On Sun, 2006-06-18 at 22:37 +0300, Sergei Steshenko wrote: On Sun, 18 Jun 2006 13:54:48 -0400 Lee Revell [EMAIL PROTECTED] wrote: On Sun, 2006-06-18 at 11:39 -0700, T.P. Reitzel wrote: Lee - I don't know if I can explain it much better, but here's another attempt. ANY sound just echoes for several seconds almost like the problem is due to conflicting interrupts. If I play a brief tone ( 1 sec.), the tone will just echo for several seconds. Imagine listening to a longer segment of audio in this manner. The result is just a continuous jumble of echoes. Other users of similar hardware must be experiencing the same problem. I haven't done ANYTHING other than upgrade from the 2.6.16.1 kernel to the 2.6.17 kernel with a slightly newer (Hg) version of ALSA. Remember, this problem has been worsening throughout the life cyle of the 2.6.16.x kernels. HTH I think you are hitting a known bug that's caused not by ALSA but by a buggy PCI quirk for VIA chipsets. It's a regression introduced during the 2.6.16.x series. It has been discussed on LKML and should be fixed in the first 2.6.17 stable release. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user 2.6.17 is out according to http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17 . ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Sun, 2006-06-18 at 22:48 +0300, Sergei Steshenko wrote: Is there any automagical formula allowing to know which non-rc kernel is stable ? I am not referring to stable in the conventional sense. -stable in kernel development has a specific meaning - it refers to the bugfixes applied to the last kernel release. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Is it possible to pre-amp output signal?
On Sun, 2006-06-18 at 21:48 +0200, Francesco Peeters wrote: OnBoard SiS 741GX/964L based CMI9761A 6-channel audio Codec That's the codec, I wanted to know the sound chipset. What driver is being used? Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Is it possible to pre-amp output signal?
On Sun, 2006-06-18 at 21:48 +0200, Francesco Peeters wrote: On Sun, June 18, 2006 16:46, Lee Revell said: On Sun, 2006-06-18 at 12:18 +0200, Francesco Peeters wrote: Hi all, Is it possible to configure ALSA through asoundrc to pre-amp (increase volume) the master output signal? Probably not - softvol can only attenuate, it cannot amplify signals. I was afraid you say that... All I can think of is try muting some unused controls, that may have an effect. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Sun, 18 Jun 2006 15:50:44 -0400 Lee Revell [EMAIL PROTECTED] wrote: I am STILL getting this message from your ISP even though I have repeatedly filled out the form. Please do not mail me again until it's fixed or you have changed ISPs. [EMAIL PROTECTED]: 194.67.23.20 does not like recipient. Remote host said: 550 Access from ip address 216.158.38.3 blocked. Visit http://win.mail.ru/cgi-bin/support_bl?ip=216.158.38.3 Giving up on 194.67.23.20. On Sun, 2006-06-18 at 22:37 +0300, Sergei Steshenko wrote: On Sun, 18 Jun 2006 13:54:48 -0400 Lee Revell [EMAIL PROTECTED] wrote: On Sun, 2006-06-18 at 11:39 -0700, T.P. Reitzel wrote: Lee - I don't know if I can explain it much better, but here's another attempt. ANY sound just echoes for several seconds almost like the problem is due to conflicting interrupts. If I play a brief tone ( 1 sec.), the tone will just echo for several seconds. Imagine listening to a longer segment of audio in this manner. The result is just a continuous jumble of echoes. Other users of similar hardware must be experiencing the same problem. I haven't done ANYTHING other than upgrade from the 2.6.16.1 kernel to the 2.6.17 kernel with a slightly newer (Hg) version of ALSA. Remember, this problem has been worsening throughout the life cyle of the 2.6.16.x kernels. HTH I think you are hitting a known bug that's caused not by ALSA but by a buggy PCI quirk for VIA chipsets. It's a regression introduced during the 2.6.16.x series. It has been discussed on LKML and should be fixed in the first 2.6.17 stable release. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user 2.6.17 is out according to http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17 . ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user I myself have been having trouble accessing my the host in the last hour or so - service unavailable, authentication errors along with service. This problem goes away by itself. Anyway, they are asking to fill a form from your, not somebody else's, IP address, and the http://win.mail.ru/cgi-bin/support_bl?ip=216.158.38.3 page has an English form to be filled - see English version in the lower half of the page. I once filled the form to have work IP address removed, they did it. ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Terrible Echo With Via VT8237 Chipset, CVS (Recent) ALSA 2.6.17 Kernel
On Mon, 2006-06-19 at 00:28 +0300, Sergei Steshenko wrote: This problem goes away by itself. Anyway, they are asking to fill a form from your, not somebody else's, IP address, and the http://win.mail.ru/cgi-bin/support_bl?ip=216.158.38.3 page has an English form to be filled - see English version in the lower half of the page. I once filled the form to have work IP address removed, they did it. Not this time. I've filled out that f**king form 10 times over the past week and nothing changes. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] Alsa with audiophile usb
Hello everybody,Im having some problems using the maudio audiophile usb with kubuntu linux (dapper)When i open the jack audio connection kit and click in setup, the alsa menu shows 4 options:Audiophile USB (tm) USB AudioUSB Audio #1USB Audio #2When i select the first (Audiophile) and try to start its return the following error:JACK compiled with System V SHM support.loading driver ..apparent rate = 44100 creating alsa driver ... hw:0|hw:0|1024|2|44100|2|2|nomon|swmeter|-|16bitcontrol device hw:0configuring for 44100Hz, period = 1024 frames, buffer = 2 periodsNote: audio device hw:0 doesn't support a 16bit sample format so JACK will try a 24bit format instead Note: audio device hw:0 doesn't support a 24bit sample format so JACK will try a 32bit format insteadSorry. The audio interface hw:0 doesn't support any of the hardware sample formats that JACK's alsa-driver can use. ALSA: cannot configure capture channelcannot load driver module alsa21:30:43.812 JACK was stopped successfully.21:30:45.592 Could not connect to JACK server as client. Please check the messages window for more info. The Jack Server just start with the option USB Audio #2 but its do not return any soundWith the OSS driver its crash when i open any synthCan someone help me?Thanks in advance,Cleber ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Alsa with audiophile usb
On Sun, 2006-06-18 at 21:32 -0300, Cleber Dantas wrote: Hello everybody, Im having some problems using the maudio audiophile usb with kubuntu linux (dapper) When i open the jack audio connection kit and click in setup, the alsa menu shows 4 options: Audiophile USB (tm) USB Audio USB Audio #1 USB Audio #2 When i select the first (Audiophile) and try to start its return the following error: What is your JACK version? I thought this was fixed a while back. This is a better question for the JACK lists than this one. Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] monaural ALSA mixes
Why does aplay take a sound, such as Front_Right.wav and play it over both speakers? for example: #cd /usr/share/sounds/asla #aplay Front_Right.wav - The sound comes out both the speakers I have connected to my card. Whereas speaker-test can keep the speakers separate: #speaker-test -c6 -tsine -f800 - this produces a fuzz sound, but it will cycle through all five channels of my sound card. I am currently listening to two of them and the sound is on one speaker, and then the other. I have a SoundBlaster Live! 24-bit 7.1 card. the driver is snd-ca0106 I compiled ALSA 1.0.9rc4 (driver, lib, util, but not the tools) My kernel is 2.6.8-2.386 Any help would be appreciated. ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Stuttering with JACK Plugin at 96kHz Using aplay (ALSA Suite 1.0.11)
Esben Stien [EMAIL PROTECTED] writes: Using the JACK plugin, running JACK at 96kHz, I'm unable to play files at 48kHz Anyone able to confirm this? -- Esben Stien is [EMAIL PROTECTED] s a http://www. s tn m irc://irc. b - i . e/%23contact sip:b0ef@ e e jid:b0ef@n n ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] monaural ALSA mixes
On Sun, 2006-06-18 at 21:53 -0400, Chris Fisichella wrote: Why does aplay take a sound, such as Front_Right.wav and play it over both speakers? for example: #cd /usr/share/sounds/asla #aplay Front_Right.wav - The sound comes out both the speakers I have connected to my card. Because this is what most users expect to happen when they play a mono .wav file. What problem are you trying to solve? Lee ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
