I wrote:
However, an even better solution for your problem would be to enable the
input monitoring function of your sound card.
Okay, monitoring is now supported, with this patch:
http://hg.alsa-project.org/alsa-kernel/rev/0fff88f7f05b
To enable monitoring from a script, run
amixer
Hello!
I just bought a couple of MAudio cards to test out (Revolution 5.1 and
Audiophile 2496). I'm trying to test the sound using arecord and aplay, but
no matter which format I choose I get the message:
aplay: set_params:900: Sample format non available
Best regards,
Helge Fredriksen
Hi!
I suppose the best way to start might be to create some pcm-device in your
.asoundrc or asound.conf.
There you know exactly how many channels you have.
Only other thing _I_ can imagine might help is: startup alsamixer, see how
many playback channels you have, look for the setting of
On Wed, Mar 19, 2008 at 11:34 AM, Julien Claassen [EMAIL PROTECTED] wrote:
Hi!
I suppose the best way to start might be to create some pcm-device in
your
.asoundrc or asound.conf.
Ouch, have tried to dig into the asound configuration a couple of times,
but had little success
Helge Fredriksen wrote:
I just bought a couple of MAudio cards to test out (Revolution 5.1 and
Audiophile 2496). I'm trying to test the sound using arecord and aplay, but
no matter which format I choose I get the message:
aplay: set_params:900: Sample format non available
Use aplay -v
Hi,
I'm experiencing a wired problem when I try to update to the last stable
version of ALSA (1.0.16).
I run the standard procedure to install alsa-driver-1.0.16, alsa-lib-1.0.16,
alsa-utils-1.0.16 (without any errors, see below). Then I reboot my laptop, run
the command
$ cat
Hi,
I'm experiencing a wired problem when I try to update to the last stable
version of ALSA (1.0.16).
I run the standard procedure to install alsa-driver-1.0.16, alsa-lib-1.0.16,
alsa-utils-1.0.16 (without any errors, see below). Then I reboot my laptop, run
the command
$ cat
Ubuntu uses multiple module paths in a preferential order
under /lib/modules/uname -r/ with kernel/ being the lowest. Type
modinfo snd-hda-intel|fgrep filename to find out where it is loading
the driver from.
The easiest thing to do in this instance is to reconfigure alsa-driver
with
Hi,
I have a MSI K9NGM3 mother board that has an ALC888 card on board. The
hda_intel module is loaded for the controlling chip, but it says it
doesn't know the model and I can't use S/PDIF on this card.
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
I tried the latest
BTW, lspci says this about the sound card:
00:07.0 Audio device [0403]: nVidia Corporation MCP67 High Definition
Audio [10de:055c] (rev a1)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7349]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fe9f8000
Hi,
I have an LG LE50 Express laptop which required some very strange (to me)
mixer settings before I could get the microphone to record anything.
It seems the mic capture volume is governed by the Digital mixer item. To
record anything, I needed to turn up the Digital level from its initial
Thank you for your reply,
it was really helpful.
I reconfigured the alsa-driver package like this
./configure --with-cards=hda-intel,usb-caiaq --with-sequencer=yes
--with-moddir=/lib/modules/2.6.22-14-rt/updates/alsa
At first it did't work, but, after removing the package
Helge
Please document what ever you do and post it here. There are others with these
cards who would also like to read configuration how-to's.
Darrell
On Wednesday 19 March 2008 03:29, Helge Fredriksen wrote:
I just bought a couple of MAudio cards to test out (Revolution 5.1 and
Audiophile
Subway Blues wrote:
and for some reason (do you know why?) that folder has a higher priority. I
wonder if there's a way to have both the packages installed without conflicts
or to make the kernel load the module I compiled.
Brute force method is to enter:
locate hda-intel
then rm the
I reconfigured the alsa-driver package like this
./configure --with-cards=hda-intel,usb-caiaq --with-sequencer=yes
--with-moddir=/lib/modules/2.6.22-14-rt/updates/alsa
try adding a --prefix=/usr in there. Also since you're specifying a non
default modules location, you'll probably need to
Hi all,
I just read through the alsa-cvslog list (see below) and found that the D/Port
appears to work now. I have Alsa (1.0.14 I think) in Gutsy Gibbon running on
my Dell D820, but I'm not sure how or what changes I need to apply in order to
make my d/port headphone jack work. Do I need to
On Wed, Mar 19, 2008 at 6:02 PM, John Bentham [EMAIL PROTECTED] wrote:
diff -r 4d2e4648746b -r 3be2f03501ef pci/hda/patch_sigmatel.c
--- a/pci/hda/patch_sigmatel.c Tue Jan 30 17:18:45 2007 +0100
+++ b/pci/hda/patch_sigmatel.c Tue Jan 30 17:30:55 2007 +0100
@@ -455,6 +455,8 @@ static struct
17 matches
Mail list logo