On Mon, Dec 09, 2002 at 03:58:37PM -0800, Paul Winkler wrote:
> Maybe my kernel is not really set up right for usbfs.
> Time for more research...
D'OH! I forgot to *mount* the /proc/bus/usb :-P
WIth that done, it loads fine and now I can see output
of the keyboard and knobs in the PD midi test
On Mon, Dec 09, 2002 at 11:04:32AM +0100, Clemens Ladisch wrote:
> There should now be messages about a disconnect and another new device
> connect. Maybe the firmware didn't get loaded properly.
>
> Please try to run the loader by hand, maybe there's an error message:
> /sbin/fxload -s /usr/share
Paul Winkler wrote:
> I picked up an Oxygen today, and I seem to get as far as
> getting the firmware loaded (via midisport_firmware)
> and loading the snd-usb-audio module,
> but I don't seem to be able to actually use it.
>
> Dec 8 00:50:27 kermit kernel: hub.c: USB new device connect on bus1/1,
I forgot to mention... I'm using alsa from cvs today.
I just now checked for updates, and the only update
since I checked out was in rme32.c.
On Sun, Dec 08, 2002 at 02:01:55AM -0800, Paul Winkler wrote:
> I picked up an Oxygen today, and I seem to get as far as
> getting the firmware loaded (via
I picked up an Oxygen today, and I seem to get as far as
getting the firmware loaded (via midisport_firmware)
and loading the snd-usb-audio module,
but I don't seem to be able to actually use it.
I have kernel 2.4.19, with the latest hotplug and fxload
sources from the hotplug sourceforge page (no