can you send an output of your planner?
# khalid/
- Original Message -
From: "Brian Cuttler" <[EMAIL PROTECTED]>
To: "LaValley, Brian E" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, July 18, 2005 4:31 PM
Subject: Re: all estimate failed
>
> Brian,
>
> You said manual dump, the amcheck succee
anda has more than 64 KB available.
OK /tmp/amanda has more than 64 KB available.
OK /etc has more than 64 KB available.
amandad: time 0.013: got packet:
Amanda 2.4 ACK HANDLE 000-0003EA30 SEQ 1120589208
########
#
amchec
river: send-cmd time 2.142 to dumper0: QUIT
driver: send-cmd time 2.142 to dumper1: QUIT
driver: send-cmd time 2.153 to dumper2: QUIT
driver: send-cmd time 2.153 to dumper3: QUIT
driver: send-cmd time 2.153 to taper: QUIT
taper: DONE [idle wait: 1.890 secs]
driver: FINISHED time 2.157
amdump: e
Hi,
I was the one who asked the original question in the link below. I've
compiled it using gcc 3 and even compiled 2.4.4p4 but I am getting the same
error. the amanda host and client are the same machine. I was not able
figure out how to correct this. My amanda project was put on hold because
Yes, I had a hard time figuring this out and it was not anywhere on google.
Most solaris distro's default to system V version of make. That would be
great if you added it to the docs. Thank you.
-Khalid
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Thursday, June 23, 2005
I had the same error a few weeks ago. When you do a make, use the bsd
version. /usr/ccs/bin/make and it should work fine.
-Khalid
- Original Message -
From: "Aaron Taylor" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, June 21, 2005 7:16 PM
Subject: Problems compiling Amanda on Solaris
> I
I'm so close to a succesful back, yet not good enough. Can some help me
figure out what the problem is .
-Khalid
-Original Message-
From: amanda backup user [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 15, 2005 7:42 PM
To: Khalid Maqsudi
Subject: daily backups AMANDA MAIL R
Solaris 8 Amanda version 2.4.5
ldd
/usr/local/sbin/amcheck
libamserver-2.4.5.so =>
/usr/local/lib/libamserver-2.4.5.so
libamtape-2.4.5.so =>
/usr/local/lib/libamtape-2.4.5.so
libamanda-2.4.5.so =>
/usr/local/lib/libamanda-2.4.5.so
'm re-installing because of the bug with gcc 2.95 and amanda 2.4.5 with the
planner/seg fault.
khalid maqsudi wrote:
> Hi,
> can anyone point out why My backup is not running.
[...]
> (brought to you by Amanda version 2.4.5)
>
>
> WARNING driver WARNING: got empty schedule from pl
t;[EMAIL PROTECTED]>
To: "khalid maqsudi" <[EMAIL PROTECTED]>
Cc: "amanda"
Sent: Tuesday, June 14, 2005 4:21 PM
Subject: Re: got empty schedule from planner???
> khalid maqsudi wrote:
> > Hi,
> > can anyone point out why My backup is not running.
>
Hi,
can anyone point out why My backup is not running.
These dumps were to tape daily04.
The next tape Amanda expects to use is: a new tape.
The next new tape already labelled is: daily02.
FAILURE AND STRANGE DUMP SUMMARY:
m5413 /cust
I am having multiple problems getting the amcheck
to output some good news to me. My tape drive is
define tapetype Ultrium-LTO {
comment "DELL PowerVault 128T LTO 100GB" length 101376
mbytes filemark 0 kbytes speed 1350
kbytes
a list of problems that I can't seem to get
reso
Amanda Tape Server Host
Check-Holding disk /cust/home/amanda:
62680834 KB disk space available, that's plentyamcheck-server: fatal slot
: could not read result from
"/usr/local/libexec/chg-zd-mtx" (got signal 10)ERROR: new tape not found in
rack (expecting
Hello,
What should my disklist look like if I want to dump
the entire c1t0d0s5 slice (which is also my holding disk) to tape. I
have only 1 machine (master) and no clients connected to a powervault 128T tape
device running solaris 8. Any help would be appreciated.
Thanks. Also, How ca
Hello,
I am very new to Amanda and would like to know if there are any newbie docs
on how to set up Amanda. The config I'm aiming towards is one machine with
a tape changer running on it and large volumes that other machines currently
ufsdump to. So the one machine will be Amanda server and
15 matches
Mail list logo
