Ok, I'm a few steps closer to adding barcode support to a modified chg-zd-mtx
script. I have a two questions for some people in the know.
chg-scsi has the following params:
./chg-scsi-slot
./chg-scsi-info
./chg-scsi-reset
./chg-scsi-eject
./chg-scsi
Jason -
Yes -
[amanda@ford amanda]$ amtape daily slot 13
amtape: could not load slot 0: illegal request
But with the change in code this now works.
Much thanks for pointing this out.
--doug
At 08:04 AM 2/2/2001 -0500, you wrote:
>On Fri, 02 Feb 2001, Doug Munsinger wrote:
>
> > I'm testing
That's essentially the same things I had to do, the timeout and the changing of
the wording returned from mtx. The only other thing I had to change was the
case test at line that read:
[$firstslot-$lastslot])
load=$1
;;
Because of the wording of the [test]), the highest
Jason -
having just been through "changer hell" I'm copying some mail I just sent
to Joe Rhett re: chg-zd-mtx and barcodes -
MAYBE it will help resolve what you are going through now.
I fought with chg-scsi and chg-zd-mtx for about a week before dropping back
and getting chg-manual to fully wo
After several days of searching, reading, and cussing, I am posting my woes
in the hopes someone has some insight to using barcodes.
Just for background, I have a Dell Poweredge-2400 with RedHat 6.2, running
amanda-2.4.2p1. My tape library is an ADIC Scalar 100 hanging off a dedicated
Adaptec
