Hi all,
I'm interresting to use amanda for backbup my network.
We do not have tape support but we have a NetApp File Server.
So, can Amanda makes backupsand restore of servers through network on File
Server.
thank, bye
kamel latrach
[EMAIL PROTECTED]
[EMAIL PROTECTED] writes:
Is there are way of forcing amanda to backup the directories in the
disklist in a certain order or at least tell it to back up a thew
directories first?
David,
There is a priority parameter for dumptypes. But it does not work for
your purpose.
priority string
Dave Sherohman wrote:
*** THE DUMPS DID NOT FINISH PROPERLY!
*** A TAPE ERROR OCCURRED: [[writing filemark: Input/output error]].
*** PERFORMED ALL DUMPS TO HOLDING DISK.
...
FAILURE AND STRANGE DUMP SUMMARY:
...
catmd1 lev 0 FAILED [out of tape]
taper: FATAL
Thanks:
John Dalbec,
Jason Thomas
It worked! I comented the lines in stream.c and amrecover goes fine.
Regards,
On Wed, 6 Mar 2002, John Dalbec wrote:
This is fixed in CVS. The following patch fixed the problem for me,
but YMMV. In particular, if your firewall is picky about source
Brandon
From what I've read on this list the netusage parameter is merely
advisory to help with the planner.
--
Martin
Brandon Moro wrote:
Also, as to my original question, I am still wondering whether I should bump
these numbers up or down in order to increase the amount of traffice (or
If I remember corredctly the defined interfaces are only needed if you
are specifying that a given disklist entry is to backed up directly via
an specific interface (I.E. Private backup networks).
When you look at the report do you see any client contention (I'm sure
you do but is it
Hello,
I had an amanda tape (DLTIV) that all of a sudden became corrupt. AMANDA
kept returning these errors in amreport:
These dumps were to tape daily0_tape3.
*** A TAPE ERROR OCCURRED: [[writing filemark: Input/output error]].
Some dumps may have been left in the holding disk.
Run amflush to
Greetings all,
I was having difficulting getting the Amanda client compiled on a
Solaris 6 workstation and subsequently found the solution on Google.
Here's what I was getting when trying to run make:
--- Snip: begin error ---
ar cru .libs/libamanda.a alloc.o amflock.o debug.o dgram.o error.o
Hi
Can I build amanda server in a host without tape and use some other
host tapes?
The goal is to save the tapeserver (the machine that has the tape device)
from CPU load when using compression best
Just like tar cf otherhost:/dev/nst0 /disk2dump
Regards
On Fri, Mar 08, 2002 at 11:36:11AM +0100, Paul Bijnens wrote:
You broke the report off just too early :-)
Ah, well...
First Amanda said that it was writing md1 from host cat to tape
while it ran out of tape.
In the NOTES section of the Amanda report you'll find something
like: (cut from my
On Fri, 8 Mar 2002 at 4:23pm, Jordi Vidal wrote
Can I build amanda server in a host without tape and use some other
host tapes?
The goal is to save the tapeserver (the machine that has the tape device)
from CPU load when using compression best
Why not just use compress client best? That
On Thu, 7 Mar 2002 at 7:13pm, Jon LaBadie wrote
New SysAdmin issue has an article titled Configuring Amanda
by David T. Smith. Article is online at:
http://www.samag.com/documents/s=7033/sam0204a/sam0204a.htm
The mailing lists that form the primary support vehicle for Amanda are
Dave Sherohman wrote:
taper: tape Daily08 kb 0 fm 0 writing filemark: Input/output error
Which indicates it could write anything to tape yet!
It had a problem just after writing the label already, seems to me.
Is hardware compression controlled by the host or the drive? I'm
currently
Hi all,
I'm happily using chg-scsi with our StorEdge and backups are going well.
Thanks to you all for helping me sort out a couple of things.
I've tried to find an answer to this in the archives but to no avail. The
StorEdge we use has a barcode reader, and the tapes are physically
labelled.
Joshua Baker-LePain wrote:
On Thu, 7 Mar 2002 at 7:13pm, Jon LaBadie wrote
New SysAdmin issue has an article titled Configuring Amanda
by David T. Smith. Article is online at:
http://www.samag.com/documents/s=7033/sam0204a/sam0204a.htm
The mailing lists that form
--
I've configured my Linux box to backup my Irix box using tar, as
recommended on this list. It works great for everything but the root
paritition. I've tried dumptype comp-root-tar and root-tar, and it
continues to fail. I tried creating an exclude.gtar file, and that
doesn't seem to be
On Fri, Mar 08, 2002 at 01:02:11PM -0500, Jenn Sturm wrote:
--
I've configured my Linux box to backup my Irix box using tar, as
recommended on this list. It works great for everything but the root
paritition. I've tried dumptype comp-root-tar and root-tar, and it
continues to fail. I
Jenn Sturm wrote:
--
I've configured my Linux box to backup my Irix box using tar, as
recommended on this list. It works great for everything but the root
paritition. I've tried dumptype comp-root-tar and root-tar, and it
continues to fail. I tried creating an exclude.gtar file, and that
Look in /tmp/amanda for runtar.*.debug file(s). In the debug file is the
command line used to invoke tar, look for --exclude-from and make sure
that the path and filename specified are as expected.
If not, verify that your dumptype in amanda.conf includes
exclude list exclude.gtar
Good luck,
On Fri, 8 Mar 2002, Dan Wilder wrote:
On Fri, Mar 08, 2002 at 01:02:11PM -0500, Jenn Sturm wrote:
--
I've configured my Linux box to backup my Irix box using tar, as
recommended on this list. It works great for everything but the root
paritition. I've tried dumptype comp-root-tar
Thank for your reply
I know the client best option but it dont fit my needs. The clients are
Windowses, and I have a spare Linux not in production to carry the load
compression.
On Fri, 8 Mar 2002, Joshua Baker-LePain wrote:
Can I build amanda server in a host without tape and use some other
On Fri, 8 Mar 2002, Eric Trager wrote:
-
- Hi all,
-
- I'm happily using chg-scsi with our StorEdge and backups are going well.
- Thanks to you all for helping me sort out a couple of things.
-
- I've tried to find an answer to this in the archives but to no avail. The
- StorEdge we use has a
Then make the spare Linux box the one that uses the Samba client to pull
data from the Windows boxes. We've been doing that here for a while with no
problems.
Sample disklist
amandaserver /dev/hda1
amandaserver /dev/hda2
spareserver /dev/hda1
spareserver //win1/cshare
spareserver
The Amanda core team is pleased to announce the release of Amanda
2.4.3b3. It is the third beta release of 2.4.3. All known bugs
are fixed.
It can be dowloaded from http://www.amanda.org/
This release include a change in the behavior of the exclude option
in a dumptype. It it now possible to
I am having a problem with my Windows backups. I have a user 'backup'
defined for each Windows system and that user is given full access
rights (everything is checked) for the share.
It backs up ok, but doesn't reset the archive setting so that it is
basically trying a level 0 dump all the time
Hello John,
Maybe libtool doesn't support your OSF1 V5.1 732 alpha.
You can debug libtool or configure with --disable-libtool
Jean-Louis
On Fri, Mar 08, 2002 at 01:52:50PM -0800, John Koenig wrote:
Thank you for all your (and everyone else involved) hard work...
Though... I am having build
Hello again...
I took the advice and inserted --disable-libtool into my configure.
(OSF1 V5.1 732 alpha)
Files actually started to compile this time instead of dying right at the
beginning..
This time... not long after some files *did* compile, it seems the broken libtool
invocation
27 matches
Mail list logo