Force clock level is for dpm manual mode only.
Change-Id: I3b4caf3fafc72197d65e2b9255c68e40e673e25e
Reported-by: Candice Li
Signed-off-by: Evan Quan
---
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 18 ++
drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 5 +++--
Am 30.08.19 um 07:14 schrieb Kuehling, Felix:
This workaround is better handled in user mode in a way that doesn't
require allocating extra memory and breaking userptr BOs.
The TLB bug is a performance bug, not a functional or security bug.
Hence it is safe to remove this kernel part of the
In Renoir's emulator, those chicken bits need to be programmed.
Signed-off-by: Aaron Liu
Reviewed-by: Huang Rui
Reviewed-by: Hawking Zhang
Acked-by: Alex Deucher
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/include/asic_reg/oss/osssys_4_0_sh_mask.h | 4
1 file changed, 4
In renoir's vega10_ih model, there's a security change in mmIH_CHICKEN
register, that limits IH to use physical address (FBPA, GPA) directly.
Those chicken bits need to be programmed first.
Signed-off-by: Aaron Liu
Reviewed-by: Huang Rui
Reviewed-by: Hawking Zhang
Acked-by: Alex Deucher
ras recovery_init should be called after ttm and smu init,
bad page reserve should be put in front of gpu reset since i2c
may be unstable during gpu reset
add cleanup for recovery_init and recovery_fini
Signed-off-by: Tao Zhou
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 16 +
This series saves umc error page info into a record structure and stores
records to eeprom, it also loads error records from eeprom and reservers
related retired pages during gpu init.
Tao Zhou (4):
drm/amdgpu: change ras bps type to eeprom table record structure
drm/amdgpu: Hook EEPROM
Inside function cz_get_performance_level(), pointer ps could be NULL via
cast_const_PhwCzPowerState(). However, this pointer is dereferenced
without any check, which is potentially unsafe.
Signed-off-by: Yizhuo
---
drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c | 3 +++
1 file changed, 3
On Fri, 30 Aug 2019 06:04:06 +0800 Mikhail Gavrilov wrote:
> On Sun, Aug 25, 2019 at 10:13:05PM +0800, Hillf Danton wrote:
> > Can we try to add the fallback timer manually?
> >
> > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
> > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
> > @@ -322,6
Null pointer dereference check should have been checked,
ahead of below routine.
struct amdgpu_device *adev = hwmgr->adev;
With this commit, it could avoid potential NULL dereference.
Signed-off-by: Austin Kim
---
drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c | 5 +++--
1 file
On Thu, Aug 29, 2019 at 08:52:31AM -0400, Alex Deucher wrote:
> On Mon, Aug 26, 2019 at 9:22 AM Oleg Vasilev wrote:
> >
> > Since DP-specific information is stored in driver's structures, every
> > driver needs to implement subconnector property by itself.
> >
> > Reviewed-by: Emil Velikov
> >
Acked-by: Huang Rui
-Original Message-
From: Aaron Liu
Sent: Thursday, August 29, 2019 10:10 PM
To: amd-gfx@lists.freedesktop.org
Cc: Deucher, Alexander ; Huang, Ray
; Liu, Aaron
Subject: [PATCH V2] drm/amd/powerplay: SMU_MSG_OverridePcieParameters is
unsupport for APU
For apu,
On Fri, Aug 30, 2019 at 8:43 AM Austin Kim wrote:
>
> Null pointer dereference check should have been checked,
> ahead of below routine.
> struct amdgpu_device *adev = hwmgr->adev;
>
> With this commit, it could avoid potential NULL dereference.
>
> Signed-off-by: Austin Kim
Applied.
save umc error records to ras bad page array
v2: add bad pages before gpu reset
Signed-off-by: Tao Zhou
Signed-off-by: Andrey Grodzovsky
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h | 2 +-
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 29 ++
drivers/gpu/drm/amd/amdgpu/umc_v6_1.c
support eeprom records load and save for ras,
move EEPROM records storing to bad page reserving
Signed-off-by: Tao Zhou
Signed-off-by: Andrey Grodzovsky
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 111 ++--
1 file changed, 83 insertions(+), 28 deletions(-)
diff --git
change bps type from retired page to eeprom table record, prepare for
saving error records to eeprom
Signed-off-by: Tao Zhou
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 59 -
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h | 11 +++--
2 files changed, 43 insertions(+), 27
On 8/30/19 8:24 AM, Tao Zhou wrote:
> ras recovery_init should be called after ttm and smu init,
> bad page reserve should be put in front of gpu reset since i2c
> may be unstable during gpu reset
> add cleanup for recovery_init and recovery_fini
>
> Signed-off-by: Tao Zhou
> ---
>
Patches are Acked-by: Huang Rui
Please use "git send-email" on amd-gfx public code review.
Thanks,
Ray
-Original Message-
From: Aaron Liu
Sent: Friday, August 30, 2019 1:33 AM
To: amd-gfx@lists.freedesktop.org
Cc: Deucher, Alexander ; Huang, Ray
; Liu, Aaron ; Deucher, Alexander
On Fri, Aug 30, 2019 at 5:37 AM Evan Quan wrote:
>
> Force clock level is for dpm manual mode only.
>
> Change-Id: I3b4caf3fafc72197d65e2b9255c68e40e673e25e
> Reported-by: Candice Li
> Signed-off-by: Evan Quan
Acked-by: Alex Deucher
> ---
> drivers/gpu/drm/amd/powerplay/amdgpu_smu.c |
On Fri, Aug 30, 2019 at 12:39 PM Andrey Grodzovsky
wrote:
>
> Problem:
> Under certain conditions, when some IP bocks take a RAS error,
> we can get into a situation where a GPU reset is not possible
> due to issues in RAS in SMU/PSP.
>
> Temporary fix until proper solution in PSP/SMU is ready:
>
On Fri, Aug 30, 2019 at 12:39 PM Andrey Grodzovsky
wrote:
>
> In case of RAS error allow user configure auto system
> reboot through ras_ctrl.
> This is also part of the temproray work around for the RAS
> hang problem.
>
> Signed-off-by: Andrey Grodzovsky
Typo in title: dmr -> drm
> ---
>
Problem:
Under certain conditions, when some IP bocks take a RAS error,
we can get into a situation where a GPU reset is not possible
due to issues in RAS in SMU/PSP.
Temporary fix until proper solution in PSP/SMU is ready:
When uncorrectable error happens the DF will unconditionally
broadcast
Issue 1:
In XGMI case amdgpu_device_lock_adev for other devices in hive
was called to late, after access to their repsective schedulers.
So relocate the lock to the begining of accessing the other devs.
Issue 2:
Using amdgpu_device_ip_need_full_reset to switch the device list from
all devices in
In case of RAS error allow user configure auto system
reboot through ras_ctrl.
This is also part of the temproray work around for the RAS
hang problem.
Signed-off-by: Andrey Grodzovsky
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 18 ++
It is fine for displays without audio functionality to not provide
any SAD block in their EDID. Do not log an error in that case,
just return quietly.
This fixes half of bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825
Signed-off-by: Jean Delvare
Cc: Alex Deucher
Cc:
It is fine for displays without audio functionality to not implement
CEA extension in their EDID. Do not return an error in that case,
instead return 0 as if there was a CEA extension with no audio or
speaker block.
This fixes half of bug fdo#107825:
It is fine for displays without audio functionality to not provide
any SAD block in their EDID. Do not log an error in that case,
just return quietly.
Inspired by a similar fix to the amdgpu driver in the context of bug
fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825
Hi all,
This is my attempt to fix bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825
[PATCH 1/3] drm/amd: be quiet when no SAD block is found
[PATCH 2/3] drm/radeon: be quiet when no SAD block is found
[PATCH 3/3] drm/edid: no CEA extension is not an error
--
Jean Delvare
SUSE
Oops, sorry, I messed up the subject line of that one, which should
really read "drm/radeon: be quiet when no SAD block is found".
--
Jean Delvare
SUSE L3 Support
___
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
Serials are reviewed by : shaoyunl
Looks like a little bit confusing that we have two place for the pte
flags . get_pte_flags already get asic specific mapping flags and
inside amdgpu_vm_bo_split_mapping , driver adjust the real HW mapping
flags again . Maybe better just keep the
Hi Dave, Daniel,
Mostly bug fixes. The big addition is display support for renoir
which is new for 5.4. I realize it's a bit late to add it but the
rest of the code for renoir is already in so it would be nice to
get the display part in as well. If not, let me know, and I'll
respin without it.
On 2019-08-30 12:39 p.m., Andrey Grodzovsky wrote:
> Issue 1:
> In XGMI case amdgpu_device_lock_adev for other devices in hive
> was called to late, after access to their repsective schedulers.
> So relocate the lock to the begining of accessing the other devs.
>
> Issue 2:
> Using
On 2019-08-30 12:39 p.m., Andrey Grodzovsky wrote:
> Problem:
> Under certain conditions, when some IP bocks take a RAS error,
> we can get into a situation where a GPU reset is not possible
> due to issues in RAS in SMU/PSP.
>
> Temporary fix until proper solution in PSP/SMU is ready:
> When
But I am not the one cherry-picking to DKMS, should I just let this person know
this is the DKMS code he should use for when appropriate API doesn't exist ?
Andrey
From: Alex Deucher
Sent: 30 August 2019 15:55:03
To: Grodzovsky, Andrey
Cc: amd-gfx list;
Hello,
I just glanced through the interface and don't have enough context to
give any kind of detailed review yet. I'll try to read up and
understand more and would greatly appreciate if you can give me some
pointers to read up on the resources being controlled and how the
actual use cases would
Hi Alex,
Please help apply below 4 patches from my personal gitlab repository to drm
master branch. CI pipeline passes with these 4 changes.
These patches are:
1) to remove external libjson-c dependence to keep amdgpu_test self-containing,
and to fix the build problem mentioned below by
35 matches
Mail list logo
