Hi Bill,
I have a VU5K, and tried that. Everything looked rock steady using the
parameters you specified.
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Bill Bordy, NJ1H
Sent: Sunday, September 29, 2013 3:28
Nick,
According to Flex, the data through VAC has the standard voice pre/post
emphasis filtering and limiting, which should make 9600 baud problematic.
They do have a request in for a way to bypass all that. The equivalent of
the direct connections in conventional rigs. This does have
TNx Alan
It does not appear much audio is coming out of the VAC port when drying to
decode 9.6 kbs FLEX dimo this rig as satellite ready over a year ago it is
time for them to keep their promise.
nick
-Original Message-
From: Alan P. Biddle [mailto:apbid...@united.net]
Sent: Sunday,
Change the RX Gain in Setup Audio VAC
Craig
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Nick Pugh
Sent: Sunday, February 26, 2012 8:33 AM
To: apbid...@mailaps.org; amsat-bb@amsat.org
Subject: [amsat-bb] Re: flex ?
TNx Alan
To: 'Nick Pugh'; apbid...@mailaps.org; amsat-bb@amsat.org
Subject: RE: [amsat-bb] Re: flex ?
Change the RX Gain in Setup Audio VAC
Craig
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Nick Pugh
Sent: Sunday, February 26, 2012 8:33 AM
Alan, Dudley el al
Here is what I am experiencing using ver 2.22
1. When I transmit on VFO B I get motor boating in the open
receiver. The fix is to always put the uplink invfo b. The
normal satpc32 in vu mode loads the transmit in vfo b. There is a special
version of
Nick,
Actually, it works pretty well with the latest version. Set up SATPC32 as
for a TS-2000. It is neat to see a signal in the transponder, drag it to
the passband, and you are ready to go.
A few comments. The Satellite Mode in the SATPC32 setup does nothing,
either way, due to the way
Nick,
One of the current problems with using SATPC32 is that since the Flex does
not support the TS-2000 satellite mode, the uplink and downlink are assigned
wrong VFO. This is problem since it tries to transmit on RX2. The
SATPC32ISS does work, since it does not use the satellite mode. Until
On Wed, 20 May 2009 20:33:42 -0500, Michael Pfeuffer
pfeuff...@gmail.com said:
Hi all,
It looks like Flex is adding a VHF/UHF option to their Flex-5000 with us
in mind:
Drool. Let's see... what can I sell...? :-)
Nate WY0X
--
Nate Duehr
n...@natetech.com
Please (!) don't post messages like this - I knew I wanted a 5000, now I
know I want a 5000 even though I can't afford it :)
Simon HB9DRV
www.ham-radio-deluxe.com www.sdr-radio.com
--
From: Michael Pfeuffer pfeuff...@gmail.com
Now, picture that
I have been following this for a couple of years, either putting off
projects it will make obsolete, or acquiring goodies such as a GPS
disciplined 10 MHz oscillator which will make frequency drift and
calibration errors a thing of the past. There was a false start on the
transverters, and some
11 matches
Mail list logo