Re: [arch-general] Help with wav files

Howdy Pete, There are a few things you can use. Probably the easiest, for your specific task, is a utility called mp3splt. extra/mp3splt 2.6.2-2 [installed] Commandline tool for splitting mp3 and ogg files without decoding HTH Storm On Sat, Jun 16, 2018 at 10:53:58PM +0100, Arch Linux

Re: [arch-general] Help with wav files

Jun 16 2018, pete via arch-general has written: ... is there a command line utility that i can give the start and finish positions and it wil do the cutting and saving for me as i hope this will be simpler and quicker ... Hi Pete, there are several. Sox. see man sox and search for trim (use /

[arch-general] Help with wav files

Hi . A little off subject but hope someone can help . I have some cd copies of albums ( i do actually own the albums) the cds are just 2 tracks one per side i have no way to play vynl albums right now i need to split these 2 tracks into their seperate tracks as per the LP's i have tried

Re: [arch-general] help - Was: arch-general Digest, Vol 137, Issue 36

On Sat, 26 Mar 2016 15:21:38 +0100, Emiel W wrote: >Yes, I did need that. Sorry for the spam and thanks for your response. >[snip] You're welcome. I send my reply to the list too, since a subscriber already feared a pet has need [1]. Several replies were send to the list only, so you need to

[arch-general] help - Was: arch-general Digest, Vol 137, Issue 36

On Sat, 26 Mar 2016 14:53:49 +0100, Emiel W wrote: >Help Assumed you request help from mailman, then don't use this address List-Post: and don't write "Help" in the message body. You need to use this addresse List-Help:

Re: [arch-general] Help diagnosing kworker 'bug'

On Sat, Aug 9, 2014 at 11:18 AM, Anatol Pomozov anatol.pomo...@gmail.com wrote: Hi Another way to get more information about this problem is to use kernel traces. Let's enable block and writeback events: sudo su cd /sys/kernel/debug/tracing echo 1 events/writeback/enable echo 1

Re: [arch-general] Help diagnosing kworker 'bug'

On Wed, Aug 6, 2014 at 3:43 PM, Oon-Ee Ng ngoonee.t...@gmail.com wrote: On Wed, Aug 6, 2014 at 10:40 AM, Anatol Pomozov anatol.pomo...@gmail.com wrote: 'perf' is a great and very powerful tool that allow to debug problems like this. Run '# perf top -g -p $PID' and it will show where the

Re: [arch-general] Help diagnosing kworker 'bug'

Hi On Fri, Aug 8, 2014 at 6:58 PM, Oon-Ee Ng ngoonee.t...@gmail.com wrote: On Wed, Aug 6, 2014 at 3:43 PM, Oon-Ee Ng ngoonee.t...@gmail.com wrote: On Wed, Aug 6, 2014 at 10:40 AM, Anatol Pomozov anatol.pomo...@gmail.com wrote: 'perf' is a great and very powerful tool that allow to debug

Re: [arch-general] Help diagnosing kworker 'bug'

On Wed, Aug 6, 2014 at 10:40 AM, Anatol Pomozov anatol.pomo...@gmail.com wrote: Hi On Tue, Aug 5, 2014 at 4:37 PM, Oon-Ee Ng ngoonee.t...@gmail.com wrote: This is after roughly 6-7 seconds, and 65 MB has already been written by that kworker thread. How long this IO activity takes? Could it

[arch-general] Help diagnosing kworker 'bug'

Yesterday night I noticed (just before performing an update my conky showing high continuous writing to root. iotop -Pa shows this:- Total DISK READ : 0.00 B/s | Total DISK WRITE : 8.93 M/s Actual DISK READ: 0.00 B/s | Actual DISK WRITE: 11.06 M/s PID PRIO USER DISK

Re: [arch-general] Help diagnosing kworker 'bug'

Hi On Tue, Aug 5, 2014 at 4:37 PM, Oon-Ee Ng ngoonee.t...@gmail.com wrote: Yesterday night I noticed (just before performing an update my conky showing high continuous writing to root. iotop -Pa shows this:- Total DISK READ : 0.00 B/s | Total DISK WRITE : 8.93 M/s Actual DISK

[arch-general] ?????? help,the ibus input candidate list is far away from input window

thank u, it really solved my problem. For firefox, I enable the preedit feature. And for geany, I just simply replace it with mousepad, because all I need is a simple editor with tab feature that can edit my notes. Mousepad is enough for me. Thanks again~

[arch-general] help, the ibus input candidate list is far away from input window

hi, when I use geany and firefox, the input candidate list is away from input window (not following the cursor, but at the bottom left corner), how can I solve this problem? I use ibus-rime, xfce. any help will be appreciated. thank you please visit this link for screen shot

Re: [arch-general] help, the ibus input candidate list is far away from input window

On Fri, Jul 25, 2014 at 10:13 AM, 宾 lian...@qq.com wrote: hi, when I use geany and firefox, the input candidate list is away from input window (not following the cursor, but at the bottom left corner), how can I solve this problem? I use ibus-rime, xfce. any help will be appreciated. thank

Re: [arch-general] help, the ibus input candidate list is far away from input window

On Friday, July 25, 2014 16:13:33 宾 wrote: hi, when I use geany and firefox, the input candidate list is away from input window (not following the cursor, but at the bottom left corner), how can I solve this problem? Please first make sure you are making use of the GTK IM Module, e.g. the

Re: [arch-general] [HELP] Upgrading kernel results in unmounted partitions

On Sat, 2014-06-07 at 15:26 -0700, Thilina Mallawa Arachchi wrote: Today I upgraded the kernel from a fresh install of 3.14 to 3.4 Hi, downgrading the kernel doesn't cause the issue. Install the packages # pacman -Q systemd libsystemd systemd-sysvcompat

Re: [arch-general] [HELP] Upgrading kernel results in unmounted partitions

Thanks for the step-by-step. I had version 212-3 running, but did as you said. I'm getting the following error when booting into the kernel 3.4 after the upgrade (I performed the upgrade in the working 3.14 kernel): systemd[1]: Failed to mount cgroup at /sys/fs/cgroup/systemd: No such file or

[arch-general] [HELP] Upgrading kernel results in unmounted partitions

Hi Arch Community, Today I upgraded the kernel from a fresh install of 3.14 to 3.4 via the yaourt install of linux-lts34 from AUR. Booting results logging into the recovery console as root. My / partition is being booted but my /var and /home are not. Very similar to this post

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update - RESOLVED

On Tue, Jan 15, 2013 at 9:57 PM, Mike Cloaked mike.cloa...@gmail.comwrote: If anyone can help or suggest links to solve the following problem I would appreciate it. I have a new system built with an Intel DQ77KB motherboard with a Crucial mSATA M4 SSD, and a Crucial SATA M4 SSD drive. I want

Re: [arch-general] Help with tigervnc problem - may be a package update required?

On Mon, Jan 21, 2013 at 2:13 AM, Uroš Vampl mobile.leec...@gmail.comwrote: Mike Cloaked mike.cloaked at gmail.com writes: Does this mean that tigervnc is out of date and needs fixing or is it s problem with X? Tigervnc needs patching for xorg-server-1.13. As an alternative, you can use

Re: [arch-general] Help with tigervnc problem - may be a package update required?

On Mon, Jan 21, 2013 at 2:13 AM, Uroš Vampl mobile.leec...@gmail.comwrote: Mike Cloaked mike.cloaked at gmail.com writes: Does this mean that tigervnc is out of date and needs fixing or is it s problem with X? Tigervnc needs patching for xorg-server-1.13. As an alternative, you can use

[arch-general] Help with tigervnc problem - may be a package update required?

I have for a long time been using tigervnc until a few months ago and loading the vnc module via xorg.conf with two relevant sections: Section Module Load vnc EndSection and Section Screen Identifier Screen0 Device Videocard0 DefaultDepth 24

Re: [arch-general] Help with tigervnc problem - may be a package update required?

On Sun, Jan 20, 2013 at 10:05 PM, Mike Cloaked mike.cloa...@gmail.comwrote: I have for a long time been using tigervnc until a few months ago and loading the vnc module via xorg.conf with two relevant sections: Section Module Load vnc EndSection and Section Screen

Re: [arch-general] Help with tigervnc problem - may be a package update required?

On Sun, 20 Jan 2013 22:23:34 + Mike Cloaked mike.cloa...@gmail.com wrote: On Sun, Jan 20, 2013 at 10:05 PM, Mike Cloaked mike.cloa...@gmail.comwrote: I have for a long time been using tigervnc until a few months ago and loading the vnc module via xorg.conf with two relevant sections:

Re: [arch-general] Help with tigervnc problem - may be a package update required?

Mike Cloaked mike.cloaked at gmail.com writes: Does this mean that tigervnc is out of date and needs fixing or is it s problem with X? Tigervnc needs patching for xorg-server-1.13. As an alternative, you can use the svn version from AUR: https://aur.archlinux.org/packages/tigervnc-svn/

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

On Wed, Jan 16, 2013 at 10:33 AM, Christian Hesse l...@eworm.de wrote: Mike Cloaked mike.cloa...@gmail.com on Wed, 2013/01/16 10:18: On Wed, Jan 16, 2013 at 6:56 AM, Christian Hesse l...@eworm.de wrote: Mike Cloaked mike.cloa...@gmail.com on Tue, 2013/01/15 21:57: [...] If anyone

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

I did try using unetbootin to make a freedos usbkey using freedos from the standard list in the available options within unetbootin but the key I prepared would not boot! I don't know if it is critical to put the partition table into the key in a particular way - but I tried using gparted

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

On Tue, Jan 15, 2013 at 11:11 PM, LANGLOIS Olivier PIS -EXT olivier.pis.langl...@transport.alstom.com wrote: I did try using unetbootin to make a freedos usbkey using freedos from the standard list in the available options within unetbootin but the key I prepared would not boot! I don't

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

Mike Cloaked mike.cloa...@gmail.com on Wed, 2013/01/16 10:18: On Wed, Jan 16, 2013 at 6:56 AM, Christian Hesse l...@eworm.de wrote: Mike Cloaked mike.cloa...@gmail.com on Tue, 2013/01/15 21:57: [...] If anyone can help advise on how to make a bootable usbkey to execute this, I

[arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

If anyone can help or suggest links to solve the following problem I would appreciate it. I have a new system built with an Intel DQ77KB motherboard with a Crucial mSATA M4 SSD, and a Crucial SATA M4 SSD drive. I want to install arch on this system and indeed preparing a usbkey with the archiso

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

On 15-01-2013 21:57, Mike Cloaked wrote: If anyone can help or suggest links to solve the following problem I would appreciate it. I have a new system built with an Intel DQ77KB motherboard with a Crucial mSATA M4 SSD, and a Crucial SATA M4 SSD drive. I want to install arch on this system

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

On Tue, Jan 15, 2013 at 10:16 PM, Mauro Santos registo.maill...@gmail.comwrote: Running the file command on the boot2880.img file after loop mounting it gives: # file /mnt/iso/boot/isolinux/boot2880.img /mnt/iso/boot/isolinux/boot2880.img: x86 boot sector, FREE-DOS Beta 0.9

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

On 15-01-2013 22:35, Mike Cloaked wrote: On Tue, Jan 15, 2013 at 10:16 PM, Mauro Santos registo.maill...@gmail.comwrote: Running the file command on the boot2880.img file after loop mounting it gives: # file /mnt/iso/boot/isolinux/boot2880.img /mnt/iso/boot/isolinux/boot2880.img: x86

Re: [arch-general] Help with making a bootable usbkey from arch for ssd drive firmware update

Mike Cloaked mike.cloa...@gmail.com on Tue, 2013/01/15 21:57: [...] If anyone can help advise on how to make a bootable usbkey to execute this, I would really appreciate it. I do have the same drive and I updated the firmware booting the image off grub. All just need is a working grub (2.0

Re: [arch-general] HELP: My webcam stop work.

On 03-01-2013 10:28, Cloud Tao wrote: How to solve this problem? thx very much. Try creating /etc/modprobe.d/uvcvideo.conf and put this inside: options uvcvideo nodrop=1 Then as root do: modprobe -r uvcvideo modprobe uvcvideo or alternatively reboot. Then try again. -- Mauro Santos

Re: [arch-general] HELP: My webcam stop work.

Hi, Am 03.01.2013 11:28, schrieb Cloud Tao: How to solve this problem? thx very much. Given that this seems to be a problem with uvcvideo itself, you are probably best of by talking to the developers of uvcvideo, which would be: [johnpatcher@vpcs linux-3.7]$ ./scripts/get_maintainer.pl -f

[arch-general] help

Hello.I'm a new users of Archlinux but using Ubuntu for 3 years. I have installed all the system following the guide of beginner's guide. and I found I could not ping to google after I reboot my computer however just as 5 minutes before I had just used pacman to install all the packages i

Re: [arch-general] help

and then I use “systemctl enable dhcpcd@ ” hoping to reset the Internet connection but the shell tells me“ Fail to issue method call:Read-only file system” You need to do 'systemctl enable dhcpcd@interface_name' substituting the interface_name with your network device like eth0. Do you get

Re: [arch-general] help

On 10/28/2012 12:18 AM, SMR wrote: Hello.I'm a new users of Archlinux but using Ubuntu for 3 years. I have installed all the system following the guide of beginner's guide. and I found I could not ping to google after I reboot my computer however just as 5 minutes before I had just used

Re: [arch-general] help

Jesse Jaara jesse.ja...@gmail.com wrote: and then I use “systemctl enable dhcpcd@ ” hoping to reset the Internet connection but the shell tells me“ Fail to issue method call:Read-only file system” You need to do 'systemctl enable dhcpcd@interface_name' substituting the interface_name with your

Re: [arch-general] Help mounting Windows drive

On Sun, Sep 09, 2012 at 09:57:06PM -0400, Randy wrote: On 09/09/2012 09:36 PM, rafael ff1 wrote: 2012/9/9 Randy gumper1...@gmail.com: In the past I have been able to mount my Windows computer using the following command: mount -t cifs -o username=USERNAME,password=PASSWORD

Re: [arch-general] Help mounting Windows drive

On Mon, Sep 10, 2012 at 3:25 AM, Randy gumper1...@gmail.com wrote: In the past I have been able to mount my Windows computer using the following command: mount -t cifs -o username=USERNAME,password=PASSWORD //192.168.1.107/Users/gumper /mnt/share/ Now when I try this I receive the message:

Re: [arch-general] Help mounting Windows drive

Is /Users a valid share on your system? Sent from my iPhone On 10 Sep 2012, at 02:25, Randy gumper1...@gmail.com wrote: In the past I have been able to mount my Windows computer using the following command: mount -t cifs -o username=USERNAME,password=PASSWORD

Re: [arch-general] Help mounting Windows drive

On Mon, Sep 10, 2012 at 03:23:27PM +0100, Stephen Martin wrote: Is /Users a valid share on your system? Sent from my iPhone On 10 Sep 2012, at 02:25, Randy gumper1...@gmail.com wrote: In the past I have been able to mount my Windows computer using the following command:

Re: [arch-general] Help mounting Windows drive

iirc i mounted my windows shares with WORKGROUP\\Username , have you tried that ? Pi Randy gumper1...@gmail.com wrote: On 09/09/2012 09:36 PM, rafael ff1 wrote: 2012/9/9 Randy gumper1...@gmail.com: In the past I have been able to mount my Windows computer using the following command:

Re: [arch-general] Help mounting Windows drive

On 09/10/2012 02:51 PM, Daniel Pirek wrote: iirc i mounted my windows shares with WORKGROUP\\Username , have you tried that ? Pi Randy gumper1...@gmail.com wrote: On 09/09/2012 09:36 PM, rafael ff1 wrote: 2012/9/9 Randy gumper1...@gmail.com: In the past I have been able to mount my Windows

Re: [arch-general] Help mounting Windows drive

Am 10.09.2012 23:56, schrieb Randy: On 09/10/2012 02:51 PM, Daniel Pirek wrote: iirc i mounted my windows shares with WORKGROUP\\Username , have you tried that ? Pi Randy gumper1...@gmail.com wrote: On 09/09/2012 09:36 PM, rafael ff1 wrote: 2012/9/9 Randy gumper1...@gmail.com: In the

Re: [arch-general] Help mounting Windows drive

On 09/10/2012 06:03 PM, Nelson Marambio wrote: Am 10.09.2012 23:56, schrieb Randy: On 09/10/2012 02:51 PM, Daniel Pirek wrote: iirc i mounted my windows shares with WORKGROUP\\Username , have you tried that ? Pi Randy gumper1...@gmail.com wrote: On 09/09/2012 09:36 PM, rafael ff1 wrote:

[arch-general] Help mounting Windows drive

In the past I have been able to mount my Windows computer using the following command: mount -t cifs -o username=USERNAME,password=PASSWORD //192.168.1.107/Users/gumper /mnt/share/ Now when I try this I receive the message: Unable to find suitable address. I am able to ping the IP

Re: [arch-general] Help mounting Windows drive

2012/9/9 Randy gumper1...@gmail.com: In the past I have been able to mount my Windows computer using the following command: mount -t cifs -o username=USERNAME,password=PASSWORD //192.168.1.107/Users/gumper /mnt/share/ Now when I try this I receive the message: Unable to find suitable

Re: [arch-general] Help mounting Windows drive

On 09/09/2012 09:36 PM, rafael ff1 wrote: 2012/9/9 Randy gumper1...@gmail.com: In the past I have been able to mount my Windows computer using the following command: mount -t cifs -o username=USERNAME,password=PASSWORD //192.168.1.107/Users/gumper /mnt/share/ Now when I try this I receive the

Re: [arch-general] Help with pm-suspend

On 06/30/2012 06:28 AM, Randy wrote: Hello All, I'm seeing a strange issue when I suspend my system. If I suspend using either the command: dbus-send --system --print-reply --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.Suspend or running pm-suspend as root,

Re: [arch-general] Help with pm-suspend

Am 30.06.2012 06:28, schrieb Randy: Hello All, I'm seeing a strange issue when I suspend my system. If I suspend using either the command: dbus-send --system --print-reply --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.Suspend or running pm-suspend as root,

Re: [arch-general] Help with pm-suspend

On 06/30/2012 06:16 AM, Marius T. wrote: Am 30.06.2012 06:28, schrieb Randy: Hello All, I'm seeing a strange issue when I suspend my system. If I suspend using either the command: dbus-send --system --print-reply --dest=org.freedesktop.UPower /org/freedesktop/UPower

Re: [arch-general] Help with pm-suspend

Am 30.06.2012 16:01, schrieb Randy: The only thing that I have in sleep.d is 90alsa, but I didn't place this file there. It must have been done when a package was installed. If I rm this file, then it works ok. Do you think that it's ok to not have this file there? I'll have to check if

Re: [arch-general] Help with pm-suspend

On 06/30/2012 11:11 AM, Marius T. wrote: Am 30.06.2012 16:01, schrieb Randy: The only thing that I have in sleep.d is 90alsa, but I didn't place this file there. It must have been done when a package was installed. If I rm this file, then it works ok. Do you think that it's ok to not have

Re: [arch-general] Help with gnupg saving password for given time

Excerpt from Randy's message of 2012-06-23T00:02-0400: What I ended up doing was per the Arch wiki. Creating the file /etc/profile.d/gpg-agent.sh with the following: /#!/bin/sh envfile=${HOME}/.gnupg/gpg-agent.env if test -f $envfile kill -0 $(grep GPG_AGENT_INFO $envfile | cut -d: -f

Re: [arch-general] Help with gnupg saving password for given time

This did the trick for me. Oh and you are correct, I switched from XFCE to Openbox. Thanks for the help! I recently had trouble modifying the local users environment even though I did it on another system about a week ago and just whacked it in /etc/environment to save time. How you

Re: [arch-general] Help with gnupg saving password for given time

On 06/23/2012 10:42 AM, Kevin Chadwick wrote: This did the trick for me. Oh and you are correct, I switched from XFCE to Openbox. Thanks for the help! I recently had trouble modifying the local users environment even though I did it on another system about a week ago and just whacked it in

[arch-general] Help with gnupg saving password for given time

Hello all, I'm running KmyMoney and saving the file with GPG encryption. In order to open this file I need to enter my password in the pin entry window that comes up. This all works fine. The issue that I'm having is that in the past (previous installation of Arch and Aptosid) I was able to

Re: [arch-general] Help with gnupg saving password for given time

I have to enter my password every time I open KmyMoney First check if gpg-agent is running /bin/ps -aux | /usr/bin/grep gpg sighup will make it forget a password which any program may send and how long it remembers is configurable.

Re: [arch-general] Help with gnupg saving password for given time

On 06/22/2012 02:09 PM, Kevin Chadwick wrote: I have to enter my password every time I open KmyMoney First check if gpg-agent is running /bin/ps -aux | /usr/bin/grep gpg sighup will make it forget a password which any program may send and how long it remembers is configurable.

Re: [arch-general] Help with gnupg saving password for given time

On 06/22/2012 02:09 PM, Kevin Chadwick wrote: I have to enter my password every time I open KmyMoney First check if gpg-agent is running /bin/ps -aux | /usr/bin/grep gpg sighup will make it forget a password which any program may send and how long it remembers is configurable.

Re: [arch-general] Help with gnupg saving password for given time

On 06/22/2012 02:32 PM, Kevin Chadwick wrote: On 06/22/2012 02:09 PM, Kevin Chadwick wrote: I have to enter my password every time I open KmyMoney First check if gpg-agent is running /bin/ps -aux | /usr/bin/grep gpg sighup will make it forget a password which any program may send and how

Re: [arch-general] Help with gnupg saving password for given time

On 06/22/2012 02:32 PM, Kevin Chadwick wrote: On 06/22/2012 02:09 PM, Kevin Chadwick wrote: I have to enter my password every time I open KmyMoney First check if gpg-agent is running /bin/ps -aux | /usr/bin/grep gpg sighup will make it forget a password which any program may send and how

Re: [arch-general] Help with gnupg saving password for given time

I get nothing with this command. Your programs will likely ignore the agent and use gpg directly using the password once without an environment variable. You should have the GPG_AGENT_INFO environment variable already setup as the third box in this link does. You can fix it quite easily but

Re: [arch-general] Help with gnupg saving password for given time

On 06/22/2012 04:22 PM, Kevin Chadwick wrote: I get nothing with this command. Your programs will likely ignore the agent and use gpg directly using the password once without an environment variable. You should have the GPG_AGENT_INFO environment variable already setup as the third box in

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On 01/19/2012 12:35 PM, Nils wrote: I believe closed nvidia drivers will shift the symbol. I tested it myself on ati and intel graphics, both 32 and 64 bit and it looked good, both on Linux and Windows. Other users with ati and intel GPU's had no problem. But two persons with an nvidia card

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

No. Everything is fine. I just removed the auto-insert of that item because the issue is fixed. You already pulled the fixed version were the user is free (again) to enter whatever he wants :) Nils On Fri, 20 Jan 2012 22:25:54 +0100 Michi mi...@nicce.at wrote: On 20.01.2012 01:08, Nils

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On Fri, 20 Jan 2012 13:52:37 -0600 David C. Rankin drankina...@suddenlinkmail.com wrote: On 01/19/2012 12:35 PM, Nils wrote: I believe closed nvidia drivers will shift the symbol. I tested it myself on ati and intel graphics, both 32 and 64 bit and it looked good, both on Linux and

[arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

Hello list! I hope this is not offtopic and I hope to find help here because Archlinux has python3 as default python. I have a software, a Music Notation Editor, here that can start in a one-liner and I need to find a bug that only occurs on some systems. git clone

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

Le jeudi 19 jan 2012 à 19:35:59 (+0100), Nils a écrit : You will see 5 lines and a symbol. The symbol must be perfectly alingned within the five lines (one pixel above can be tolerated). It should look like this: http://www.wargsang.de/pyqt-bug-report.jpg Do you see that symbol shifted up or

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On Thu, Jan 19, 2012 at 4:35 PM, Nils l...@nilsgey.de wrote: You will see 5 lines and a symbol. The symbol must be perfectly alingned within the five lines (one pixel above can be tolerated). It should look like this: http://www.wargsang.de/pyqt-bug-report.jpg Do you see that symbol shifted

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On Thu, Jan 19, 2012 at 11:35, Nils l...@nilsgey.de wrote: You will see 5 lines and a symbol. The symbol must be perfectly alingned within the five lines (one pixel above can be tolerated). It should look like this: http://www.wargsang.de/pyqt-bug-report.jpg Do you see that symbol shifted up

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On 20/01/12 07:35, Nils wrote: Hello list! I hope this is not offtopic and I hope to find help here because Archlinux has python3 as default python. I have a software, a Music Notation Editor, here that can start in a one-liner and I need to find a bug that only occurs on some

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

2012/1/19 Nils l...@nilsgey.de: Hello list! I hope this is not offtopic and I hope to find help here because Archlinux has python3 as default python. I have a software, a Music Notation Editor,  here that can start in a one-liner and I need to find a bug that only occurs on some systems.

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On Thu, Jan 19, 2012 at 8:35 PM, Nils l...@nilsgey.de wrote: Hello list! I hope this is not offtopic and I hope to find help here because Archlinux has python3 as default python. I have a software, a Music Notation Editor,  here that can start in a one-liner and I need to find a bug that

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On Thu, Jan 19, 2012 at 12:35 PM, Nils l...@nilsgey.de wrote: Hello list! You will see 5 lines and a symbol. The symbol must be perfectly alingned within the five lines (one pixel above can be tolerated). It should look like this: http://www.wargsang.de/pyqt-bug-report.jpg Do you see that

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

Nils wrote: Hello list! I hope this is not offtopic and I hope to find help here because Archlinux has python3 as default python. I have a software, a Music Notation Editor, here that can start in a one-liner and I need to find a bug that only occurs on some systems. git clone

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On 01/19/12 17:19, Jérôme M. Berger wrote: Could you please answer me with the following information attached: Your graphic driver (type (ati, nvidia, intel etc. and closed or open source?) and desktop enviroment/window manager (Gnome, KDE, xfce, i3 etc.). If you want to add more information

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

Thank you very very much for that information! This problem is the last piece before I can do my first (alpha) release. With xrandr --fbmm I could reproduce the error on the first try so I can do further tests myself now. And it really is a font issue. The lines in the display are correct but

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)

On Thu, Jan 19, 2012 at 4:57 PM, Denis A. Altoé Falqueto denisfalqu...@gmail.com wrote: On Thu, Jan 19, 2012 at 4:35 PM, Nils l...@nilsgey.de wrote: You will see 5 lines and a symbol. The symbol must be perfectly alingned within the five lines (one pixel above can be tolerated). It should look

Re: [arch-general] Help me recover KDE-Plasma context menu

On 08/14/2010 12:59 AM, Nilesh Govindarajan wrote: I changed the plasma desktop behavior to show application launcher menu on right click. Now I'm unable to set wallpaper etc. How to revert to default setting if not by rm -r ~/.kde4/share/config/plasma* Nilesh, Have you tried restarting

Re: [arch-general] Help me recover KDE-Plasma context menu

On 08/14/2010 11:29 AM, Nilesh Govindarajan wrote: I changed the plasma desktop behavior to show application launcher menu on right click. Now I'm unable to set wallpaper etc. How to revert to default setting if not by rm -r ~/.kde4/share/config/plasma* Duh leave it guys. rmed reconfigured.

Re: [arch-general] Help with backtrace from kcmshell crash - changing icons.

On 8 August 2010 01:53, David C. Rankin drankina...@suddenlinkmail.com wrote: Guys,        I have a problem with kdemod3. It is really still in quite fantastic shape. When I try to switch icons to the 'iceglass' icons theme (or Azenis theme, etc..) kcmshell crashes starting with ? strlen()

[arch-general] Help with backtrace from kcmshell crash - changing icons.

Guys, I have a problem with kdemod3. It is really still in quite fantastic shape. When I try to switch icons to the 'iceglass' icons theme (or Azenis theme, etc..) kcmshell crashes starting with ? strlen() from /lib/libc.so.6 ?? Hopefully it isn't something like the std c libraries now

[arch-general] help unravelling dmesg

I was wondering if someone might be able to explain this to me. I was reading the output from dmesg, and found the following entry. CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl

Re: [arch-general] help unravelling dmesg

Am 30.06.2010 20:52, schrieb aerospace1...@hotmail.com: I was wondering if someone might be able to explain this to me. I was reading the output from dmesg, and found the following entry. CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel

[arch-general] help with synce?

Greetings, I recently migrated to archlinux and over-all find it quite good. I have had much success using the wiki to get my system set up and configured to my liking. So far, I only have one issue I can't resolve. I am trying to get SynCE working on my system so I can transfer material

Re: [arch-general] Help me with OpenVPN

On Sun, Jun 6, 2010 at 1:15 AM, Benjamin Campbell benji.campb...@gmail.com wrote: Port 1194 is the official IANAhttp://en.wikipedia.org/wiki/Internet_Assigned_Numbers_Authorityassigned port number for OpenVPN. Newer versions of the program now default to that port. --

Re: [arch-general] Help me with OpenVPN

Hi, Thank you all. you been great. With your help, I am now able to connect but small problem. I can't transfer/ping any data. I think there is some problem with firewall rules with Iptables. But I don't know much about iptables. Any guide which would be get started with IPtables? Regards,

Re: [arch-general] Help me with OpenVPN

On Sun, Jun 6, 2010 at 11:28 AM, Gaurish Sharma cont...@gaurishsharma.comwrote: Hi, Thank you all. you been great. With your help, I am now able to connect but small problem. I can't transfer/ping any data. I think there is some problem with firewall rules with Iptables. But I don't know

[arch-general] Help me with OpenVPN

Hi, I am trying to connect to a OpenVPN but no success. it says openvpn[5052]: TCP: connect to xx.xx.xx.xx:1723 failed, will try again in 5 seconds: Connection refused and this goes on. On Server Side, I checked openVPN is running OKAY but its not listing to port 1723. here is my server config:

Re: [arch-general] Help me with OpenVPN

openvpn[5052]: TCP: connect to xx.xx.xx.xx:1723 failed, will try again in 5 seconds: Connection refused ... here is my server config: port 1194 proto udp Does this ^^ ring a bell? Just to make sure it's clear, your server listens on UDP 1194, your client tries to connect to TCP 1723. --

Re: [arch-general] Help me with OpenVPN

On Sat, Jun 5, 2010 at 6:04 PM, Damjan Georgievski gdam...@gmail.comwrote: openvpn[5052]: TCP: connect to xx.xx.xx.xx:1723 failed, will try again in 5 seconds: Connection refused ... here is my server config: port 1194 proto udp Does this ^^ ring a bell? Just to make sure it's

Re: [arch-general] Help - Sound Disappeared -- Really! All modules - Gone?? (kernel bug?)

On Tuesday 01 December 2009 17:34:42 and regarding: Did you reboot during this time frame? Perhaps the alsa modules were loaded, and when you finally rebooted (on the 20th?), they weren't there to be re-loaded. Oh, yes, sorry for not including that. This is on my laptop so it get booted at

Re: [arch-general] Help - Sound Disappeared -- Really! All modules - Gone?? (kernel bug?)

2009/12/3 Raghavendra Prabhu raghu.prabh...@gmail.com haha... I think we may soon see RTFM replacing DTFG(Do the F* Googling) or something better It is not Do that Friendly Google ? : ) -- Cordialement, Coues Ludovic 06 148 743 42 -- () ascii ribbon campaign - against html e-mail

Re: [arch-general] Help - Sound Disappeared -- Really! All modules - Gone?? (kernel bug?)

It depends on what you put for F in RTFM,same thing in DTFG. On Fri, Dec 4, 2009 at 5:57 PM, ludovic coues cou...@gmail.com wrote: 2009/12/3 Raghavendra Prabhu raghu.prabh...@gmail.com haha... I think we may soon see RTFM replacing DTFG(Do the F* Googling) or something better It is

Re: [arch-general] Help - Sound Disappeared -- Really! All modules - Gone?? (kernel bug?)

Thanks again DR. Next time, just send me back the following link: http://www.justfuckinggoogleit.com/ haha... I think we may soon see RTFM replacing DTFG(Do the F* Googling) or something better

Re: [arch-general] Help - Sound Disappeared -- Really! All modules - Gone?? (kernel bug?)

David C. Rankin wrote: Guys, This is really strange. Sound used to work on my laptop, now it is just -- gone. The hardware hasn't changed (obviously): David Just an observation I'm making here, when I sift through the e-mail archives of the Arch e-mailinglist about every 7th or 8th post

  1   2   >