: Re: [arts-users] FASTEM in ARTS
Dear Natalia,
Try this:
VectorCreate( trv )
NumericCreate( wind_speed )
NumericCreate( wind_dir )
AgendaSet( iy_surface_agenda ){
SurfaceDummy
specular_losCalc
ppathCalc( rte_pos=rtp_pos, rte_los=specular_los )
ArrayOfStringSet( iy_aux_vars, ["Op
gt; Tel.: (613) 998-5349 | Cellphone: (343) 549-4262
>> natalia.bliankinsht...@nrc-cnrc.gc.ca
>>
>> From: Patrick Eriksson
>> Sent: March 7, 2019 2:43 AM
>> To: Bliankinshtein, Natalia; arts_users.mi@lists.uni-hamburg.
(613) 998-5349 | Cellphone: (343) 549-4262
natalia.bliankinsht...@nrc-cnrc.gc.ca
From: Patrick Eriksson
Sent: March 7, 2019 2:43 AM
To: Bliankinshtein, Natalia; arts_users.mi@lists.uni-hamburg.de
Subject: Re: [arts-users] FASTEM in ARTS
Dear Natalia,
Y
To: Bliankinshtein, Natalia; arts_users.mi@lists.uni-hamburg.de
Subject: Re: [arts-users] FASTEM in ARTS
Dear Natalia,
Yes, FASTEM is at hand, but it is a bit tricky to give a general answer.
It depends on e.g.
* Do you want to retrieve any surface properties?
* Do you want to set specific wind
Dear Natalia,
Yes, FASTEM is at hand, but it is a bit tricky to give a general answer.
It depends on e.g.
* Do you want to retrieve any surface properties?
* Do you want to set specific wind speeds etc, or do you want to obtain
wind speed etc. by interpolation from some data?
Can you give
Dear ARTS users and developers,
I have recently started learning ARTS and appreciate its extreme flexibility.
According to the documentation, ARTS does not include an option of using
FASTEM6 water surface model, however I see some evidence people have used it,
for example here in Mr. Oliver
Thanks – that works fine.
Stuart
From: Richard Larsson
Sent: 08 November 2018 17:01
To: Fox, Stuart
Cc: arts users mi
Subject: Re: [arts-users] FASTEM in ARTS
Hi Stuart,
A development model problem. I am not sure this will solve your issues
completely, but can you try adding SurfaceDummy
Hi Stuart,
A development model problem. I am not sure this will solve your issues
completely, but can you try adding SurfaceDummy at the start of your
iy_surface_agenda?
The new variables you are seeing are part of a method Patrick is working on
for calculating the Jacobian of surface features.
I'm currently trying to use the ARTS version of FASTEM via iySurfaceFastem in
iy_surface_agenda. This used to work, but on the latest version of the ARTS
trunk (2.3.1146) it fails with:
Run-time error in method: AgendaSet
The agenda iy_surface_agenda must generate the output WSV
