[EMAIL PROTECTED] (Dan) writes:
It is solved now It was a problem at the ISP level. some UDP packets
filtered..
Pleased you have managed to solve the problem.
Simon
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
hi!
Is asterisk support SIP early dial response 484 ?
how to setup if ..
tnx,tomaz
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Hi all,
i try to use PGSQL app effectively, but there are two problems:
1. If i use PGSQL like
exten = s,3,PGSQL,Query resultid ${connid} SELECT count(*) FROM credit
WHERE callerid=${callerid};
an error occurs with breaking query string at ( (first bracket).
Newbie question, please excuse me for this
one. If an admin adds and extension in the voicemail.conf file will
asterisks read from .conf files dynamically? Or does the asterisks daemon
need to be restarted? I guess this question pertains to all .conf
files. Also is there support for MySQL?
Sorry forgot the subjsect line
Newbie question, please excuse me for this
one. If an admin adds and extension in the voicemail.conf file will
asterisks read from .conf files dynamically? Or does the asterisks daemon
need to be restarted? I guess this question pertains to all .conf
files.
I've been working on a fixed point mec3 echo can. The old mec3 which
crashed a lot of peoples machines because it was floating point in the
kernel is now available as mec3-float.h. I'd appreciate any testing /
feedback on the new fixed point mec3 echo can. Thanks!
Mark
Thanks,
Dan
- Original Message -
From: Simon J Mudd [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, June 29, 2003 1:15 PM
Subject: Re: [Asterisk-Users] Asterisk, IAX and NAT issue
[EMAIL PROTECTED] (Dan) writes:
It is solved now It was a problem at the ISP level. some
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dnia niedziela 29 czerwiec 2003 16:59, Michael Kane napisa:
Newbie question, please excuse me for this one. If an admin adds and
extension in the voicemail.conf file will asterisks read from .conf files
dynamically? Or does the asterisks daemon
... but it still only works on x86? I get a failure to find asm/i387.h at
line 69 of zaptel.c on my ppc box.
Iain
--On Sunday, June 29, 2003 11:55 am -0500 Mark Spencer
[EMAIL PROTECTED] wrote:
I've been working on a fixed point mec3 echo can. The old mec3 which
crashed a lot of peoples
PS: Does this new MEC3 take the amount of taps to use from Asterisk's
zapata.conf now? I remember it always used 256 taps, while it now,
like the others, defaults to 128. mec3.h still has 256 as default.
The 256 is the amount of space it allocates -- not quite as efficient at
that allocation
Oops, a remenent of when it was still FP. Should be fixed now.
Mark
On Sun, 29 Jun 2003, Iain Stevenson wrote:
... but it still only works on x86? I get a failure to find asm/i387.h at
line 69 of zaptel.c on my ppc box.
Iain
--On Sunday, June 29, 2003 11:55 am -0500 Mark Spencer
... thanks - seems to go now. I'll test some more.
Iain
--On Sunday, June 29, 2003 3:30 pm -0500 Mark Spencer [EMAIL PROTECTED]
wrote:
Oops, a remenent of when it was still FP. Should be fixed now.
Mark
On Sun, 29 Jun 2003, Iain Stevenson wrote:
... but it still only works on x86? I get
Hey Mark,
I wouldn't make MEC3 the default just yet. I was just testing with
MeetMe, which was one of the things where MEC3 went wrong for me in the
past. After around 8 channels from an E100P-connected PRI joined the
conference, everything became one big chaos of noise. When enough
channels
Thanks Mike
Mike
Michael Kane
To-Talk Communications LLC.
37 Sandusky Dr.
Wareham, Ma. 02571
508-295-2826
- Original Message -
From: Michael Baird [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, June 29, 2003 4:50 PM
Subject: Re: [Asterisk-Users] newbie .conf question
There
Hi ppl
I admire to your work. One question
I am trying to figure out what formats in total are supported by *, and i saw
the command show translation which popup nice table with source and
destination formats.
Find out most of them - but stll missing the meaning for row/collomn
8,9,11,12,13
I've read that you can run UML (user mode linux) under valgrind. I'm
looking for someone to setup UML running under valgrind and test with some
Digium hardware to help test for any potential problems at the zaptel
layer. I'm willing to make some hardware freely available to someone who
can get
Just loaded it yesterday running on TDM400P and X100P. I have also
loaded the sample setttings.
1. What's the first thing you guys do? Change .conf files or do it
from CLI?
2. Just trying to get it up and running to see if everything works. Do
I setup Extensions first?
3. Can I just
On Sun, 2003-06-29 at 18:48, Borce Stevanoski wrote:
Hi ppl
I admire to your work. One question
I am trying to figure out what formats in total are supported by *, and i saw
the command show translation which popup nice table with source and
destination formats.
Find out most of them -
Hey Matt,
On Sun, Jun 29, 2003 at 14:14:18 -1000, Matt Darnell wrote:
Aloha Oliver,
That was it! Thanks, I am going to download the eStara softphone and try to
talk from one phone to another!
Nice that it worked. An alternative method might be putting the line
noload = chan_zap.so into
I'm new to *, but I've dealt with this issue on other switches. It
sounds like either you are timing out getting DNIS information from your
CO, or you are having trouble hearing the DTMF tones that are pulsed to
you during the call setup process. Someone else on the list may know:
is it possible
Thanks for the info... I've answered your questions below. I am not
experienced with telecom at this level (yet), but this sounds like really
good info to quiz XO's switch tech over.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steven
Critchfield
Sent:
Title: [Asterisk-Users] Help! Problems talking to upstream switch
This
helps alot! I believe that it is an ADIT 600, and I definitely want to
adjust those gain settings.I'll ask Martin about the timeout on DNIS,
although it would seem that the fact that I have observed the loss of only the
Use 1 for timing. You actually do have a timing source to sync to.
As for slips and bipolar violations...
T1s are just high speed serial lines. A sleep is when you loose sync
with the far side and when you see a 1 come across the line, you may not
know which bit it was for. This would be a slip.
Steven,
I thought that 1 would mean that my T100P card would set the timing for
the line. Is this incorrect? If I am reading this wrong then please set me
straight.
My carrier has their end set to be the sync source. If I set the timing to
1, won't that conflict?
My line is set up
24 matches
Mail list logo
