Mark,
Are you using a cross over cable? Also do you have an answer step in
your * Context?
Chris
Message: 5
From: Mark Messmore, Technical Support, University Telcom Inc.
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Thu, 18 Mar 2004 15:22:18 -0500
Subject: [Asterisk-Users] T100P and
kernel that work is 2.4.20-20.9 not kernel 2.4.20-28.9(haven't tested)
- Original Message -
From: Glenn Dalgliesh [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 18, 2004 9:45 PM
Subject: [Asterisk-Users] Redhat lastest kernel problems with Zaptel drivers
kernel 2.4.20-30.9
I updgraded to kernel 2.4.20-28.9 to kernel 2.4.20-30.9 and my digium card
drivers refused to load I then rebooted with the previous kernel and all
work fine. Not sure if it is related or not thought it might help
- Original Message -
From: Michael Zheng [EMAIL PROTECTED]
To: [EMAIL
Hi,
G726-32 codec from beta firmware 1.0.4.54 now works fine with *. Tested
on BT101 and HT286 over a 64K DSL line. Some progress but iLBC still has
not surfaced.
Get it from http://www.grandstream.com/BETATEST/
Master
___
Asterisk-Users mailing
LOL - I sent this email 3 days ago.. What took it so long? :)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Matthew Marlowe
Sent: Monday, March 15, 2004 11:19 AM
To: Asterisk Users
Subject: [Asterisk-Users] Cisco 7960 SIP Firmware
Out of
Okay, I need to sleep. I just need to recompile the drivers!!!
Sorry for the false alarm
- Original Message -
From: Glenn Dalgliesh [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 18, 2004 10:05 PM
Subject: Re: [Asterisk-Users] Redhat lastest kernel problems with Zaptel
I had the same issue when I updated to 2.4.20-30.9. All you need to do is recompile the drivers. I go ahead and do a full zaptel, libpri and asterisk recompile just for good measure. Works fine after that!
I was running on Fedora Core 1, but I wanted to use Festival which won't compile using
I sometime get this with my AS5300 gateway...
Turns out that the dial plan on the 5300 was configured such that the AS5300
encapsulated the sdp stream inside a mime/multipart message, and the
Asterisk RTP stack can't find the SDP portion. Asterisk would complain that
it didn't understand the
Dear Ben,
Thank you for your help. But if I putnoload = chan_oss.so inthe modules.conf, then my soundcard can work in my Astersik? Actually, when I tried to install my soundcard and X100P in Redhat 8.0, the same problems occurred.
however,when I test soundcard in Redhat (No in Asterisk), the
Suresh,
From: suresh kumar [EMAIL PROTECTED]
Subject: [Asterisk-Users] Can i do voice chat without using the hardware
snip
Without using any of Digium's hardware or T1 or E1
interfaces
, can i do voice chat between two computers
(intranet/internet)?
If possible, How can i do that? (Any
Okay fellow Asterisk users... Listen up (or perhaps more appropriately,
read down).
The Asterisk community is growing at a remarkable pace. I know there are
thousands of you out there -- in fact there are over eight *thousand*
subscribers to asterisk-users alone, and almost one *thousand*
Hi,
How I can log the progress of line/channel status ?
(Busy, Hangup etc)
I have a CRM appl with a softphone and I want from
this appl to log the results
(maybe from Manager API ?).
Is this callprogress option working ? If yes, can I
handle it from Manager API or from a C#library ?
Haven't been able to find anything on this the past couple days, so I'm asking ya'll!
When I call my bank or a vendor or who ever through the * server and they want me to enter a pin number followed by the pound sign, what's the trick? Of course when I hit pound, * asks me where I want to
In article [EMAIL PROTECTED],
Mitchell S. Sharp [EMAIL PROTECTED] wrote:
-=-=-=-=-=-
I had the same issue when I updated to 2.4.20-30.9. All you need to do
is recompile the drivers. I go ahead and do a full zaptel, libpri and
asterisk recompile just for good measure. Works fine after
101 - 114 of 114 matches
Mail list logo