You probably have to do a
exten = s,1,n,Set(TOTAL=0)
in the start of the call, to initialize the TOTAL variable
On Sun, Jan 31, 2010 at 4:29 AM, Thomas Perron thomas.per...@gmail.comwrote:
thanks for the response.
I tried to simplify and am now tuning the following, but it is not
responding
On Sat, Jan 30, 2010 at 03:57:30AM +, frangky robert wrote:
H all...
I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1,
dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final.
My problem is, every time i unplug the astribank power supply, and
reconnect it,
On Fri, Jan 29, 2010 at 05:48:53PM -0500, sean darcy wrote:
listu...@spamomania.co.uk wrote:
On Thu, 2010-01-28 at 23:11 -0600, Karl Fife wrote:
Appears completely resolved!
No more home-spun patches!
Thanks!
-K
It's *not* fixed here:
DAHDI Version: 2.2.1 Echo Canceller: MG2
On 14:29, Sat 30 Jan 10, Olle E. Johansson wrote:
Friends,
Before the Christmas holidays, I did send this letter and did not get a lot
of response, but some. Since then, I've been able to get interest from a few
parties that are willing to fund parts of this work, including Digium, the
30 jan 2010 kl. 23.40 skrev Michiel van Baak:
On 14:29, Sat 30 Jan 10, Olle E. Johansson wrote:
Friends,
Before the Christmas holidays, I did send this letter and did not get a lot
of response, but some. Since then, I've been able to get interest from a few
parties that are willing to
hi
i don't claim to be a star at this but there must be some obvious part missing;
my dial plan is below. out put from cli follows.
exten = 3011,1,Answer()
exten = 3011,n,Set(TOTAL=0)
exten = 3011,n,Set(TOTAL=${Math(${TOTAL}+300,int)})
exten = 3011,n,WaitExten(3)
exten =
On Sun, Jan 31, 2010 at 10:37:29AM -0500, Thomas Perron wrote:
hi
i don't claim to be a star at this but there must be some obvious part
missing;
my dial plan is below. out put from cli follows.
exten = 3011,1,Answer()
exten = 3011,n,Set(TOTAL=0)
exten =
ok.
that worked
thanks!!
On Sun, Jan 31, 2010 at 10:50 AM, Tzafrir Cohen
tzafrir.co...@xorcom.com wrote:
On Sun, Jan 31, 2010 at 10:37:29AM -0500, Thomas Perron wrote:
hi
i don't claim to be a star at this but there must be some obvious part
missing;
my dial plan is below. out put from
sean darcy wrote:
Calling from my home using Asterisk 1.6.2.1 to an office extension
(Asterisk 1.6.1.13) the callerid is not honored:
Home:
-- Starting simple switch on 'DAHDI/1-1'
-- Executing [...@internal:1] Answer(DAHDI/1-1, ) in new stack
-- Executing
does dtmf any any variable that i can capture and use w/ some logic
like in the case of a gotoif
so, if caller enters a certain number then gotoif matches XX
otherwise go to YY.
On Sun, Jan 31, 2010 at 10:58 AM, Thomas Perron thomas.per...@gmail.com wrote:
ok.
that worked
thanks!!
On
On Sun, 31 Jan 2010, Thomas Perron wrote:
does dtmf any any variable that i can capture and use w/ some logic
like in the case of a gotoif
Anyone have a clue what this means? Anyone? Anyone?
--
Thanks in advance,
-
Steve
Hi Shahnawaz
Have you considered how you are going to address location issue for Mobile
users calling 911. You should think of SS7 MAP/TCAP to atleast know their
Cell ID
Regards
Sam
Thanks very much everybody who contributed their thoughts. I would try
to get some DID's so that each physical
Hi Shahnawaz
Have you considered how you are going to address location issue for Mobile
users calling 911. You should think of SS7 MAP/TCAP to atleast know their
Cell ID
Regards
Sam
Thanks very much everybody who contributed their thoughts. I would try
to get some DID's so that each physical
Hi,
My costumers are logged in on my Asterisk PBX through XLite Softphone (SIP).
My server is
connected to PSTN. Problem is when SIP phone calls ordinary phone via dahdi
I get
DAHDI/1-1 ANSWERED SIP/number-number and billsec field from cdr is start
counting.
Is it normal behavior ? Can I change
does dtmf any any variable that i can capture and use w/ some logic like
in the case of a gotoif
Anyone have a clue what this means? Anyone? Anyone?
How about this:
does dtmf transmit any variable that i can capture and use w/ some logic
like [in the case of a] gotoif
Philipp
--
Clue,
If a caller keys in 4 5 3 will some variable return 453?
I ASSume yes, since you can make menu selections with DTMF, obviously you
can process the results further or in other ways than that.
Cary
-Original Message-
From: asterisk-users-boun...@lists.digium.com
I have uploaded a patch for 1.4 and trunk that allows you to mute
either or both parts of a mixmonitor recording. I would appreciate it
if someone apart from me could test it and let me know how you get on.
Thanks!
Julian
https://issues.asterisk.org/view.php?id=16740
for PCI-DSS compliance we
Let's say I have two Asterisk boxes, A and B. I am trying to get A to do
SIP registration on B, so an extension for A can dial SIP phones covered by
B. If I examine the logs on B, if the registration succeeds, I am seeing a
notice to that effect on B. But if the registration *fails*, i'm not
On 31 Jan 2010, at 16:24, sean darcy wrote:
-- Executing [...@internal:3] Set(DAHDI/1-1, CALLERID=Test
447) in new stack
Why isn't the office asterisk picking up the callerid from the home
asterisk?
You're making up the syntax?
http://www.voip-info.org/wiki/view/Setting+Callerid
S
--
On 31/01/10 6:27 PM, Thomas Perron wrote:
what is wrong with this please:
;exten = 4,1,WaitExten(3)
exten = 4,1,Set(TOTAL=${MATH(${TOTAL}+500,int)})
exten = 4,n,WaitExten(3)
exten = 2,1,Set(TOTAL=${MATH(${TOTAL}+200,int)})
exten = 2,n,Waitexten(3)
exten =
Steve Howes wrote:
On 31 Jan 2010, at 16:24, sean darcy wrote:
-- Executing [...@internal:3] Set(DAHDI/1-1, CALLERID=Test
447) in new stack
Why isn't the office asterisk picking up the callerid from the home
asterisk?
You're making up the syntax?
On 31 Jan 2010, at 23:17, sean darcy wrote:
Doh. It appears I was making it up.
Thanks.
No problem. If that doesn't work, try a sip debug and see what's in
that.
S
--
_
-- Bandwidth and Colocation Provided by
Hello,
I have separate contexts defined in voicemail.conf as follows:
[abcdental]
100 = 1234,John Doe
And call application directory using the following syntax:
exten = 1,1,Directory(abcdental[,abcdental,f])
However since I migrated from 1.4 to 1.6, app_directory no longer parses the
Try:
core set verbose 4
From the Asterisk CLI
-uzzi
PS: If you're not seeing any connection information, be sure to double-check
the IP address is correct. Learned that lesson the hard way =\
On Sun, Jan 31, 2010 at 5:51 PM, Jim Rosenberg j...@amanue.com wrote:
Let's say I have two Asterisk
Uros Djokic wrote:
Hi,
My costumers are logged in on my Asterisk PBX through XLite Softphone
(SIP). My server is
connected to PSTN. Problem is when SIP phone calls ordinary phone via
dahdi I get
DAHDI/1-1 ANSWERED SIP/number-number and billsec field from cdr is
start counting.
Is it
On Sunday 31 January 2010 18:12:15 cjwstudios wrote:
Hello,
I have separate contexts defined in voicemail.conf as follows:
[abcdental]
100 = 1234,John Doe
And call application directory using the following syntax:
exten = 1,1,Directory(abcdental[,abcdental,f])
Uh, the square brackets in
Thanks Tilghman, that made a substantial difference.
On Sun, Jan 31, 2010 at 6:18 PM, Tilghman Lesher tles...@digium.com wrote:
On Sunday 31 January 2010 18:12:15 cjwstudios wrote:
Hello,
I have separate contexts defined in voicemail.conf as follows:
[abcdental]
100 = 1234,John Doe
What's this:
-- Attempting call on DAHDI/g1/9removed for application Wait(5) (Retry 1)
-- Requested transfer capability: 0x00 - SPEECH
-- Channel 0/2, span 1 got hangup, cause 44
-- Forcing restart of channel 0/2 on span 1 since channel reported in use
-- Hungup 'DAHDI/2-1'
Hi
Is anyone aware of a fixed cellular terminal that supports 3G video calls?
Regards,
Chris
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update
hi all,
just had a terrible and sleepless weekend at the office trying to get
asterisk going, its just tough love ;)
have tried several asterisk versions but i currently have the following
setup on debian lenny that kind of works.
asterisk-1.6.2.0
dahdi-linux-complete-2.2.0.2+2.2.0
I do some test:
1.unplug usb connector from server to astricon
2.unplug power to astricon
3.plug-in the power to astricon
4.plug-in the usb connector
Here is the log from /var/log/messages after doing the 1st step.
Feb 1 19:38:24 localhost last message repeated 2 times
Feb 1 19:43:39
31 matches
Mail list logo