This is what PRI debug says on problematic call:
> Protocol Discriminator: Q.931 (8) len=42
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability:
> Speech (0)
>
If I'm not mistaken (that's how I was told), the inbound calls are managed by
Telekomunikacija Polska, and outbound calls are managed by Profuturo.
- Original Message
From: Bartosz Jozwiak <[EMAIL PROTECTED]>
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Saturday
Hi guys,
Here is a bit more detailed information of my problem:
If I connect Asterisk PBX to the Polish telco via E1, I don't get any red
alarms or anything. The line seems to be fine and the inbound calls are also
accepted by the Asterisk. However, whenever I try to make an outbound call, the
Hello All,
I'm having problems connecting Asterisk to Telco in Poland (using E1). The
telco guys are saying that the RING message is missing.
How can I make Asterisk to send the RING message? Does anyone have any samples
of zaptel and zapata for Poland?
Best Regards,
Alex
_