Hi tbskyd,
We have found that the Grandstream's are not that great a phone. One of
our best sellers is the Snom range and I know that the Australian
supplier spends half his time in Hong Kong so you shouldn't have any
problems getting so over there. They are a little more expensive than
Hmm the shape looks like an Aastra but the buttons down the side look
like PlayStation buttons to me. Maybe it's a Sony Cisco joint effort.
Joel.
On Mon, 2007-10-29 at 16:35 -0500, Kyle Sexton wrote:
Does anyone know who really makes this phone:
We used to use CentOS 4 here but about 6-8 months ago we found that
they were too slow with updates their repos for some of the 3rd party
software that we were developing. We switched to SuSe 10.2 and haven't
looked back. However Asterisk works equally well on both. Just pick your
Hi All,
I need to have the same file played from MoH every time someone gets to
MoH from a Dial. I want to play marketing messages from it and I want it
to start from file 1 every time.
Anyone know if/how this can be done?
Cheers,
Joel.
___
On Sep 26, 2007, at 3:07 AM, Joel Hill wrote:
Hi All,
I need to have the same file played from MoH every time someone gets
to
MoH from a Dial. I want to play marketing messages from it and I
want it
to start from file 1 every time.
Anyone know if/how this can
incompatibility. Other than that I've never had one skip a beat, so I
hope you have the same luck.
Cheers,
Joel Hill
Support Manager
Asterisk IT
On Mon, 2007-08-27 at 18:15 -0400, Steve Totaro wrote:
Steve Totaro wrote:
Arthur Miller wrote:
Hello list,
I have a customer who
Sorry to say I have to disagree with you but I just had a heap of old
Voicemails which I couldn't be bothered deleting through my phone, So I
went in to /Old/ and ran rm -f on the first 20, I then had to listen to
another that wasn't deleted and it was still accessible from the phone,
upon further
Hi I'm looking for some help with Vicidial, If you have experience with
it and could help with some consulting please contact me off list.
Cheers,
Joel Hill
Asterisk IT
[EMAIL PROTECTED]
___
--Bandwidth and Colocation provided by Easynews.com
Hi all,
I'm having some trouble. I've got an IVR with 4 different languages
using the SETLANGUAGE command and I'm getting a 6 second delay when I
make the first selection, after that all is fine. There's nothing in my
dial plan that I can find that would be causing it. And the delay is
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joel Hill
Sent: Wednesday, May 02, 2007 9:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] IAX and SETLANGUAGE delays
Hi all,
I'm having some trouble. I've got an IVR
/sbin/safe_asterisk
the rc.local script is loaded after all the others so it won't effect
anything else, and we had some trouble with some low heat VIA
motherboards so we did the modprobe twice for the PRI.
Hope this helps.
Cheers,
Joel Hill
Support Engineer
Asterisk IT
On Mon, 2007-04-30 at 19:14
Let me also add my interest, we've got a site using Nagios and haven't
had time to work anything out yet related to Asterisk.
Cheers,
Joel.
Joel Hill
Support Engineer
Asterisk IT
On Wed, 2007-04-11 at 18:42 -0400, Watkins, Bradley wrote:
Allow me to register my interest in any and all things
Give this a try it fixes a problem we have had with a couple of Via
boxes.
modprobe wcte11xp
modprobe wcte11xp
ztfcg -vv
zttool
We found that probing the card twice before running ztcfg helped alot.
Cheers,
Joel.
Joel Hill
Support Engineer
Asterisk IT
03 8320 8100
On Mon, 2007-04-02
Here you go. This is from ATP
http://www.austechpartnerships.com/forum/viewtopic.php?t=76
/etc/zaptel.conf
loadzone=au
defaultzone=au
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
bchan=17-31
dchan=16
This assumes connection to a carrier, where they provide clocking.
/etc/asterisk/zapata.conf
Hi All,
I'm having some troubles with my Dell 860 and TE110P card. Using
Asterisk 1.2.14, Zaptel 1.2.12 and Libpri 1.2.4. I'm getting digital
noise, like a half ring almost and other jitter. Here's the kicker it's
only on the outside part of the call. Ie. if I rang you, you would here
it but I
Hi All,
I have a new client who has an existing Asterisk PABX and is looking
for us to install a TE110P for him, However he has a Dell SC420 and I
have never used one before.
I have had no problems with any other Dell servers which we use almost
exclusively.
Has anyone had any good/bad
Hi Noro,
Depending on what firmware you have this is the way to go.
Go to the Functions keys page, then look for the Record button, Change
the type to DTMF and in number put in *1 which is the default Asterisk
recording function.
Hope this helps
Cheers,
Joel
Asterisk IT
, Joel Hill wrote:
Hi Noro,
Depending on what firmware you have this is the way to go.
Go to the Functions keys page, then look for the Record button, Change the
type to DTMF and in number put in *1 which is the default Asterisk recording
function.
Hope this helps
Cheers,
Joel
Asterisk
64, while native formats is 4 (read/write = 64/64)
I'm running Asterisk 1.2.11 and have tried a couple of different codecs
in SIP.conf.
Any ideas??
Cheers,
Joel Hill
Support Engineer
Asterisk IT
www.asteriskit.com.au
www.theasteriskshop.com.au
19 matches
Mail list logo