r strategy:
*linear: Rings interfaces in the order they are listed in the configuration
file. Dynamic members will be rung in the order in which they were added. *
Regards
Thorben Jensen
--
_
-- Bandwidth and Colocation Provid
>
> MixMonitor creates the file before it starts recording. The b option
> simply waits until the bridge event to take audio frames and add them to
> the stream. I don't really see why this is a problem. It isn't like you
> are going to run out of space for zero length files, and more to the point
>
> I was looking over Queue and I don't think there is actually an option
> for Queue that will automatically start a MixMonitor. I see a few options
> involving mixmonitor (x and X), but they appear to be more about allowing
> the parties involved with the call to start MixMonitor through dialpla
>
> Hi Jonathan,
>
> If I set the MixMonitor option on a queue, it will not create an zero
> length file if the call is not bridged, and I just assumed it would be the
> case with option b.
>
> I have set the fileformat to raw, but if I set it to wav it will create a
> 64 byte file.
>
> Off course
sfull. Some error occurs. The problem is still there…
>
> ** **
>
> Regards,
>
> Ikka (Jakarta, Indonesia)
>
> ** **
>
> *From:* asterisk-users-boun...@lists.digium.com [mailto:
> asterisk-users-boun...@lists.digium.com] *On Behalf Of *Thorben Jensen
> *S
I am using MixMonitor to record calls and I have set the "b" option as I
don't want to get files for non-bridged calls.
Mixmonitor always creates a file with 0 bytes even when the call is not
bridged. Is it possible to avoid this somehow?
This is what I do:
Set(CALLFILENAME=${STRFTIME(${EPOCH},,
Hi,
I'm looking for someone who can help us setup Fax with T. 38 on asterisk
10.x.x - We need to be able to do FoIP (Fax over IP) as we have no pstn
lines available.
Do you know how to setup a reliable fax system, then we will pay you to
help us do this.
Regards
Thorben
--
__
I'm trying to get an Exhange 2003 calendar working with asterisk 10.0.0-rc1
I keep getting this warning and the calendar always returns free even
though it should be busy:
[Nov 12 13:14:39] WARNING[28787]: res_calendar_exchange.c:411
exchangecal_request: Unknown response to CalDAV calendar 1901_2
Is there a place where I can find more description of error messages I
see in asterisk CLI?
I get this message very often when watching the CLI:
[Nov 4 12:12:42] ERROR[21533]: app_queue.c:3083 ring_entry: Found a
channel matching iterface SIP/213_323 while status was 1 changed to 0
I have Google
Can anyone tell me why I get this error very often?
[Nov 4 12:12:42] ERROR[21533]: app_queue.c:3083 ring_entry: Found a
channel matching iterface SIP/213_323 while status was 1 changed to 0
Regards
Thorben G. Jensen
--
_
-- Band
r" <[EMAIL PROTECTED]> skrev i en meddelelse
news:[EMAIL PROTECTED]
--- Thorben Jensen <[EMAIL PROTECTED]> wrote:
> http://voip-info.org/wiki/view/Easy+PABX
>
> With Easy PABX you can create your own virtual PABX
> online in just minutes.
> Easy PABX is based on As
http://voip-info.org/wiki/view/Easy+PABX
With Easy PABX you can create your own virtual PABX online in just minutes.
Easy PABX is based on Asterisk and best of all - it's completely free.
Regards
thorben.dk
___
--Bandwidth and Colocation provided by
IPManager version 1.6 has just been released. Below
is a list of some of the features you will get on your Asterisk server using
IPManager to generate your configuration files.
Download: http://ipsoftware.thorben.dk
PBX Features
The following features will be available to users of
Thank you
"Doug Lytle" <[EMAIL PROTECTED]> skrev i en meddelelse
news:[EMAIL PROTECTED]
> Thorben Jensen wrote:
>
>>BUT how do I delete a database entry?
>>
>>
>
> Thorben,
>
> You still have to use the old DBdel command.
>
> Doug
>
&g
To read a database entry from the asterisk database using the new DB
function the syntax is this:
Set(DB(Family/Key))
And to write to the database:
Set(DB(Family/Key)=Value)
BUT how do I delete a database entry?
Regards
Thorben
___
--Bandwidth and
I need help from somebody to make a Boot CD which includes a Linux
distribution and Asterisk, it should install more or less automatically
(like [EMAIL PROTECTED]). I need this to make a version that is optimized for
use with IPManager, IPSpeedDial and IPSwitchBoard.
If you think you are capable
I have been working on solving a major issue with
IPSwitchBoard. It was reported that IPS would use all available memory and get
the PC to grind to a halt.
I could not understand this as I had it running on
many different PC’s in Denmark.
I now found the bug:
IPS would crash on
IPSpeedDial creates speed
dial numbers for Asterisk.
Download from: http://ipsoftware.thorben.dk
Use this to create speed
dial numbers that can be used by all extensions on your Asterisk server. This
program will create entries in the asterisk database which you then can lookup
in y
I am proud to announce that I have just released a brand new IPSwitchBoard
totally rewritten from scratch. The new version has been built on the
experiences gained by the previous versions.
Download for FREE: http://ipsoftware.thorben.dk
IPSwitchBoard is totally customizable and will give you, am
I am rewriting IPSwitchBoard at the moment. I want to
make IPSwitchBoard “Skinable” meaning that you can design your own
skins with company logo etc. You will also be able to add graphical extension
buttons, and led’s that will light up ex. DND, busy/free, message waiting
and much more.
2005.08.19
Version 1.3
* IPManager now
supports SIP, IAX and Zap extensions and trunks.
* Music on Hold
Groups can be defined and assigned.
* MP3 files can
be uploaded directly to Asterisk
FREE download: http://ipsoftware.thorben.dk
IPManager is now fully customizable as everything is generated from
templates using the IPManager database. Complete set of templates is
included in the download. You can configure the dial plan and other
configuration files exactly like you want, using nothing but notepad.
There's a very easy synt
IPManager - Asterisk Configuration Tool has been released with IPSwitchBoard
Overview
IPManager is a configuration tool for Asterisk. It gives you an easy way of
configuring Asterisk to perform maintenance and creation of the following:
. SIP Extensions can be configured very easy with Caller
Version 0.124 - 27 July 2005
* Improved Billing facilities:
* - Rate can be specified with four decimals
* - Connection Fee can be supressed by specifying a negative number
* - Rates can be defined for a time period (ex.: 18:00 - 23:59)
* - Description can be added for a Call Rate
Download FREE:
IPSwitchBoard Version 0.123 - 17 July 2005
* Queue Analysis has been added to IPSwitchBoard.
In order to properly manage ACD queues, it is important to be able to keep
track of details of call setups and teardowns in much greater detail than
traditional call detail records provide. In order to sup
IPSwitchBoard Version 0.123 - 17 July 2005
* Queue Analysis has been added to IPSwitchBoard.
In order to properly manage ACD queues, it is important to be able to keep
track of details of call setups and teardowns in much greater detail than
traditional call detail records provide. In order to
Version 0.122 - 12 July 2005
* Call charges are now shown on the Calls page
* IPSwitchBoard will check for a live connection every minute and reconnect
if the connection is lost for some reason (asterisk restart etc.)
* Bug fixes
FREE Download: http://ipswitchboard.thorben.dk
___
IPSwitchBoard Version 0.121 - 02 July 2005
* Extensions can be added to speed dial number. This can be used to dial
speed dial numbers from any phone connected to your asterisk system. This
requires that you configure your dial plan to take advantage of this
feature. See sample Dial Plan in the IP
Download FREE
from: http://ipswitchboard.thorben.dk
IPSwitchBoard is
an Operators Panel for the Asterisk PBX. IPSwitchBoard is a FREE Windows.NET
application which gives you:
*
Unattended/attended transfers.
* Park calls and
retrieve/forward them again.
* Organize all
your SIP,
Version 0.119 - 5. june 2005
. Monitored extension removed from panel for enhanced security
. Transfer of recordings from asterisk enhanced
. Lots of bug fixes
FREE Download: http://ipswitchboard.thorben.dk
IPSwitch
Version 0.118 - 23. may 2005
* Drag and Drop Call and Channels buttons
* Show Channels as buttons on the Panel
* Show Queue information in very large letters on new panel
* Schedule Wakeup Calls (good for hotels)
Download: http://ipswitchboard.thorben.dk
You can choose "Refresh Extensions" from the file menu in IPSwitchBoard,
that will delete all extensions and read all from your server again.
Thorben
"Ronald Wiplinger" <[EMAIL PROTECTED]> skrev i en meddelelse
news:[EMAIL PROTECTED]
>I had to cancel Broadvoice, but IPswitch does not like to d
Version 0.117 - 21. may 2005
* CAPI support has now been added to IPS
* Save all you speed dial number in the asterisk server and retrieve them
from any other intance of IPS. This way you can easily share all your speed
dial numbers between all users of IPS.
* All speed dial number can be saved wi
The latest version of IPSwitchBoard has been released:
Version 0.116 - 16. may 2005
* Call Data Records can be charted (number of calls and duration of calls by
the hour).
* Hotel Application can now print the calls and charges
* Many minor bug fixes
FREE Download: http://ipswitchboard.thorben.
Versiom 0.115 - 10. may 2005
* This version will encrypt your configuration file, so logins and passwords
are not easily readable.
* Lots of bug fixes.
Download: http://ipswitchboard.thorben.dk
Regards
Thorben
___
Asterisk-Users mailing list
Asteris
>Can you post a full dialplan example...
>
I have a very complex dialplan but this is all you need. Put this line in
your dial plan whenever you are making or recieving a call.
exten => 201,hint,SIP/201
>Also, will this only work for certain phones and atas also?
I don't know. I use it for SNOM
receives a call, right?
What if SIP/201 is making a dialout call, does it show as busy in the
phone's keypad?
Julian J. M.
On 5/7/05, Thorben Jensen <[EMAIL PROTECTED]> wrote:
> > Could you please give us some more detail as to what you did, in terms
> > of
> >
> Could you please give us some more detail as to what you did, in terms of
> configuring the hint, and specifically what changes in the behavior of the
> running server-phone interaction as a result?
You need to set the hint for the phone when the phone is being dialed like
this:
exten => 20
IPSwitchBoard Version 0.114 - 6. may 2005.
* IPS will now delete recordings on the Asterisk server after it's
transferred to your PC.
* You can now configure call Rates as X of a Currency Unit. If your Currency
is Dollars then the smallest Call Rate is Dollar/X. X would typically be
1000.
* IPS wi
Version 0.113 - 4. may 2005
* Can now transfer recorded conversations to your PC automatically
* You can configure a folder to hold recordings
* You can now specify that all conversations on an extension should be
recorded
* It's possible to attach a customised string to the recording file name
IPSwitchBoard Version 0.112 - 1. may 2005.
Manual for IPSwitchBoard is now included in the download for the new
version, please let me know if you find errors in the manual.
It's now possible to specify a program to launch along with parameters when
there's an incoming call for IPS. You can also
Version 0.111 - 30. April 2005.
* Security added, you can now specify what the user of IPS is allowed to do
such as start different programs, hang-up calls etc.
* Many bug fixes
Download: http://ipswitchboard.thorben.dk
_
Version 0.110 - 29. April 2005.
Completely rebuild with .NET Version 2.0 BETA 2.
IPS now has MDI (Multiple Documents Interface) meaning that you can have
many program open at the same time, they will all update in real-time.
Hotel/Call Shop Billing module.
Status of Agents can be monitored on
Hi Ronald,
What happens in your Asterisk box when you press the Speed Dial number in
IPS?
Thorben
| -Oprindelig meddelelse-
| Fra: Ronald Wiplinger [mailto:[EMAIL PROTECTED]
| Sendt: 26. april 2005 00:37
| Til: [EMAIL PROTECTED]
| Emne: Re: [Asterisk-Users] Re: IPswitch: How to use spee
I am currently working on implementing Hotel Billing in IPSwitchBoard.
The idea is that a receptionist in a hotel can just right click an extension
button and choose "Account"; IPS will now calculate the call charges made
from that extension and show all calls and charges on a form.
The recepti
The latest Version 0.92 of IPSwitchBoard can connect to your MySQL database and
show you call records with filtering on extension and from- and to date. IPS
now also will check if thereâs a newer version available on start-up and
offer to start the download. The Configuration page has changed la
Version 0.91 - 17. April 2005.
* IPS is now using the context configured in Asterisk for peers - the
context on the configuration page is used for Speed Dial Numbers only
* New tab page for Speed Dial Numbers
Download here: http://ipswitchboard.thorben.dk
___
The just released version 0.90 of IPSwitchBoard now also supports Zap
Channels.
* Zap support added - thank you to Daniel for letting me use his server and
to Tim for patiently testing
* Configuration page can now be password protected
* Option to show technology on buttons (SIP, IAX2, Zap)
* N
There have been a lot of bug fixes because of the change to the event driven
model.
Download here: http://ipswitchboard.thorben.dk
IPSwitchBoard is an Operators Panel for the Asterisk PBX. IPSwitchBoard is a
FREE Window
| I removed the old version, deleted the install directory, and installed a
| new version, then changed the config so it connects to a different pbx. I
| am
| still seeing all the old extensions, nothing from the new pbx, even though
| ipswitchboard is connecting to the new pbx. Where are the exten
Version 0.85 - 13. April 2005.
* IPSwitchBoard is now event-driven - much less load on server
* Major bug fixes.
FREE Download here: http://ipswitchboard.thorben.dk
IPSwitchBoard is an Operators Panel for the Asterisk
| On a slightly different note:
|
| Is there a setting to force IPS not to minimise every time an action
| is performed?
|
| It gets very annoying after a few minuites and with our reception
| being very very busy it could get quiet sickly
|
On the config page: uncheck "minimize after call/tran
| On the Calls tab the Caller ID Name is for incoming calls for me
| correct, since caller-id on my Zap device does not work with
| The list of outgoing calls shows an empty space, I believe it should
| show the same caller-id, as it does on the Panel tab.
|
|
| bye
|
| Ronald
Hi Ronald,
You
|
| Any chance of integrating some sort of input text box, where you can
| just type in the extension number and hit enter to transfer a call?
|
| Maybe with some option for attended transfer as well even?
|
| Regards,
| Adam
Hi Adam,
There is a textbox for input on the panel bottom left-hand
|
| You spit out the versions faster than I can reinstall them :)
|
| Did you by any chance had the time to take a look a transfer problem
| when there are two active calls on a monitored extension ?
|
| Ivan
Hi Ivan,
The versions are coming fairly fast I admit :-) I looked at the transfer
pro
| Some others, would it be possible to pass a message to a phone (onto the
| display) ???
|
|
| bye
|
| Ronald
Hi Ronald,
Good idea, any ideas on how to do that? I think it would depend a lot on the
phone being used.
Thanks for your interest in IPS.
Thorben
Version 0.80 - 12. April 2005.
* Swedish language added - thanks Daniel Nylander
* Bug fixes
Download for FREE: http://ipswitchboard.thorben.dk
Would you like to help translate IPS into your language? Please click the
link below for details. I will add your language as soon as I receive it.
htt
Hi,
I make a call to my mobile, now I would like to transfer the call to another
extension from my mobile, I try with #1 (which is configured in
features.conf as unattended transfer), and pbxtransfer is played back to me,
but when I try to enter an extension I just get an error.
What am I doing w
| It is there!
| However, if I try to call 650, than I get 650 is unavailable
| If I try to make a call on the IPswitch, e.g., to 601, and click on
| call, it just closes the window.
|
| sip show usersshows the extension 650
| sip show peers shows the extension 650 with Host UNSPECIFIED
|
| I cannot setup the Monitor Extension SIP/650
|
| I tried to use
|
| [650]
| username=admin
| type=friend
| context=inhouse
| secret=admin-secret
| host=dynamic
| nat=yes
| canreinvite=no
| qualify=yes
| [EMAIL PROTECTED]
| callerid="ELMIT office",<650>
| callgroup=1
| pickupgroup=1
|
| It doe
Version 0.79 - 11. April 2005.
* Norvegian language added - thanks to Kåre Sundland
* German language updated - thanks to Marco Walz
* Russian language updated - thanks to dnz63
* Caller ID name added to call buttons when on call
FREE Download: http://ipswitchboard.thorben.dk
Would you like to
Version 0.78 of IPSwitchBoard has just been released.
* Records all incoming and outgoing calls on separate tab page
* Make calls by double clicking the incoming/outgoing call
* Italian language updated - thanks to Francesco Romano
FREE Download: http://ipswitchboard.thorben.dk
Would you like to
Release notes:
Version 0.77 - 10. April 2005.
* All strings can now be translated - new strings file published on forum
* Optimizations of code
* Bug fixes
Download here: http://ipswitchboard.thorben.dk
Would you like to see IPSwitchBoard in your own language?
http://ipswitchboard.thorben.dk/
|
| >How do I change the language when I do commands from the manager
| interface?
| >It seems that if I originate a call to a mailbox it will always speak
| >English. I have set the language to "da" in sip.conf general context, but
| it
| >still speaks English. I have no problems when using a pho
How do I change the language when I do commands from the manager interface?
It seems that if I originate a call to a mailbox it will always speak
English. I have set the language to "da" in sip.conf general context, but it
still speaks English. I have no problems when using a phone, everything is
i
Release notes:
Pop-up on incoming call is now configurable
Romanian Language updated
Language can be changed on config page (Remember to restart after changing
language)
Bug fixes
Download here: http://ipswitchboard.thorben.dk
IPSwitchBoard
Version 0.75 has just been released, it has three additional languages:
* Spanish
* Dutch
* Romanian
Download from
here:
http://ipswitchboard.thorben.dk
IPSwitchBoard is
an Operator
IPSwitchBoard now speaks English, Danish, German, Portuguese, Italian and
Russian.
The new release version 0.74 can be downloaded from here:
http://ipswitchboard.thorben.dk
Are you interested in helping to translate IPSwitchBoard?
http://ipswitchboard.thorben.dk/index.php?option=com_simpleboard&
Version 0.73 - 3. April 2005.
* Italian Language added - Thank you to Francesco Romano for translating
* IPSwitchBoard can minimize to tray
Download: http://ipswitchboard.thorben.dk
IPSwitchBoard is now available in English, Danish and Italian; would you
like to help translate IPSwitchBoard?
h
Version 0.72 - 2.
April 2005. Download from http://ipswitchboard.thorben.dk
• Danish
language added
• Transfer
to Queues now supported
• You can
return a substring of the ${CALLERID} variable used in the URL for CRM systems.
To enable
transfer to Queues you must type in an extens
Version 0.71 - 30. march 2005.
. Fixed a memory leak, and optimized performance drastically.
Download from here: http://ipswitchBoard.thorben.dk
IPSwitchBoard is an Operators Panel for the Asterisk PBX. IPSwitchBoard is a
FREE Windows.NET application which gives you:
Unattended/attended tran
Hi all,
I have just released IPSwitchBoard version 0.70. There are no major changes,
but a few important bug fixes.
You can download IPS from the new website I have created for IPSwitchBoard:
http://ipswitchboard.thorben.dk
Regards
Thorben
___
Aster
IPSwitchBoard Version 0.69 has just been released; it
is available for FREE: Download here
Release notes:
Record
calls by right clicking any extension button, you can have several
recordings at the same time.
Bug
fixes
The recordings will be
placed as a single wav
e put in the Name
> field in ISB, the Namer under Caller ID, also the number is put by
> Asterisk in "Server" extension group, don't know if this matters at all
>
> Maybe a small macro or input menu would be useful for a first entry
>
> Thanks for this really gre
nd I click
> import from server the deleted extension doesn't disappear.
>
> Thanks for making this awesome app available!
>
> Cheers!
> Remco
>
>
> On Wed, 23 Mar 2005, Thorben Jensen wrote:
>
> > Hi Remco,
> >
> > The Monitored extension i
?
>
> Then a general question, using the switchboard, is it possible to edit the
> database that asterisk uses that allows me to assign names to incoming
> phone numbers?
>
> Thanks!
>
>
>
> On Sun, 20 Mar 2005, Thorben Jensen wrote:
>
> > Release 0.66
Release 0.68 of IPSwitchBoard is ready for download at:
http://www.voip-info.org/tiki-index.php?page=IPSwitchBoard+BETA
Release Notes:
Import/Export extensions to "cidname" in Asterisk Server, integrate this in
your dial plan to see who's calling by using the Asterisk app.
"LookUpCidName()."
S
Hi Ivan,
I know it's a problem and I will look at it.
Thorben
> -Oprindelig meddelelse-
> Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af Ivan Meic (Vox Mundi)
> Sendt: 22. marts 2005 10:12
> Til: Asterisk Users Mailing List - Non-Commercial Discussion
> Em
Hi Mike,
I will test it again, and let you know.
Thorben
> -Oprindelig meddelelse-
> Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af Mike Holloway
> Sendt: 21. marts 2005 21:49
> Til: Asterisk-Users@lists.digium.com
> Emne: [Asterisk-Users] IPSwitchBoard B
rk button gets
> dislocated.
>
> Ivan
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Thorben
> Jensen
> Sent: Monday, March 21, 2005 3:05 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subje
IPSwitchBoard Version 0.67 Release notes:
CRM integration, can call a web page with callerid when there's an incoming
call. You can specify the min. and max. length of the callerid.
Drop any active call.
Help file integrated in IPSwitchBoard.
Play button for sound files.
Bug fixes - thank you fo
> > There's now a growing group of us who make manager-based applications
> > that wish parking worked properly.
> >
> > Maybe if we get a few more we will have enough to bombard the
> bugtracker!
> >
> > I guess seeing as we're all programmers one of us should make a patch.
> > What I'm thinking
23:52
> Til: Asterisk Users Mailing List - Non-Commercial Discussion
> Emne: Re: [Asterisk-Users] Parking a call in manager interface
>
> Thorben Jensen wrote:
> > Hi Matt,
> >
> > Thank you for your suggestion, it solved my problem. It's a shame that
> we
Release 0.67 of IPSwitchBoard will be available tomorrow and that release
can Drop calls, as well as look-up Web Pages when a call comes in. (CRM
function).
Thorben
> -Oprindelig meddelelse-
> Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af Thorb
t; Til: Asterisk Users Mailing List - Non-Commercial Discussion
> Emne: Re: [Asterisk-Users] IPSwitchBoard-BETA Update
>
> Stoopid question 1:
>
> I see how to make a call but for the life of me I can't see how to DROP
> a call.
>
> Thorben Jensen wrote:
>
>
Release 0.66 of IPSwitchBoard is now available for FREE download at:
http://www.voip-info.org/tiki-index.php?page=IPSwitchBoard+BETA
Enhancements:
Support for Call Parking and retrieve/forward them again.
Last Call on the Queues Page now displays a date-time in human readable
format.
Added Cal
Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af Matt Riddell
> Sendt: 18. marts 2005 21:34
> Til: Asterisk Users Mailing List - Non-Commercial Discussion
> Emne: Re: [Asterisk-Users] Parking a call in manager interface
>
> Thorben Jensen wrote:
>
I sure will :-)
Thorben
> -Oprindelig meddelelse-
> Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af Aldo Bergamini
> Sendt: 19. marts 2005 23:39
> Til: asterisk-users@lists.digium.com
> Emne: [Asterisk-Users] Re: IPSwitchBoard BETA
>
> [EMAIL PROTECTED] is b
I am not sure that it will run on Mono, for now I only support it on
Windows. (I will test it on Mono later).
Thorben
> -Oprindelig meddelelse-
> Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af Aldo Bergamini
> Sendt: 19. marts 2005 17:50
> Til: asterisk-use
command shows the actual extension intented to be
dialed (but it is not).
Max.
Op za, 19-03-2005 te 12:39 +0100, schreef Thorben Jensen:
Hi Kong, IAX2 support has been added in release 0.65 of IPSwitchBoard, which is readyfor download athttp://www.voip-info.org/tiki-index.php?page=IPSwitchBoard+BETA
ul
>
> ----- Original Message -
> From: "Thorben Jensen" <[EMAIL PROTECTED]>
> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
>
> Sent: Thursday, March 17, 2005 12:10 AM
> Subject: SV: SV: [Asterisk-Users] IPSwitchBoard
Hi all,
Just to let you know that I have just released a new version, 0.65, of
IPSwitchBoard-BETA.
This is some of the fixes:
. Load IAX2 extensions as well as make calls/transfers To IAX2 (I will add
ZAP next)
. You can monitor Parked Calls (I have a lot of problems getting parking to
work)
.
I am trying to handle parked calls through the manager interface, but having
a lot of trouble, if I try to Park a call I try with this command:
Action: Redirect
Channel: SIP/211
Exten: 700
Context: phones
CallerID: tgj
Priority: 1
But it just doesn't work because I have no extension 700 in my dia
Is it possible to park a call through the manager
interface? If yes; how?
Regards
Thorben
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or updat
>
> I just installed .NET 2.0 Beta, so I don't know
> if it's a problem with your app or with new .NET,
> but after a few minutes of running your app and not doing anything (the
> app
> runs idle)
> a new window appears with a following message:
>
> Timer2: Object reference not set to an instance
>
> I've installed it and tested it, it works great, the idea is great, works
> simple enough
> for users to understand :)
> One problem though:
> If a phone registered under "Monitored Extension" has two
> calls, one Active and one On Hold and if I attempt a transfer via
> IPSwitchBoard
> it wor
> >
> > Thorben
>
> Is source code available?? what license is it released under?
>
> --
> --
The source code is not available at the moment and the software is provided
as is - no warranties given :-)
tgj
___
Asterisk-Users mailing list
Asterisk-Us
M 3/17/2005, you wrote:
> >Very cool ...
> >
> >Have you tried to compile it against Mono?
> >
> >-JB Hawaii
> >
> >Thorben Jensen wrote:
> >
> >>>Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> >>> >>[EMAIL PROTECTED
> Fra: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] På vegne af John Breeden
> Sendt: 16. marts 2005 22:24
> Til: Asterisk Users Mailing List - Non-Commercial Discussion
> Emne: Re: SV: [Asterisk-Users] IPSwitchBoard BETA
>
> Very cool ...
>
> Have you tried to compile it against
I have just published a mini manual for "IPSwitchBoard for Asterisk" on the
Wiki:
http://www.voip-info.org/wiki-IPSwitchBoard+BETA
IPSwitchBoard is a FREE Windows.NET application that will:
. Organize all your extensions (automatically retrieved from Asterisk)
. Monitor all extensions
. Monit
1 - 100 of 115 matches
Mail list logo