Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
MSN will only work on 1 ISDN2 line and cannot be spread across 2 ISDN2
lines. From your description I assume you have 2 calls up and the 3rd
call
fails. This is because you can only have 2
Hi
I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can
use all 4 lines for out going calls fine, but on incoming we can only use 2.
On calling in using the main msn, the 3rd line gives a an engaged signal.
I have unplugged 1 of the cards, and the other card takes the 2
On Wed, 18 May 2005, Lee Norvall wrote:
Hi
I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can
use all 4 lines for out going calls fine, but on incoming we can only use 2.
On calling in using the main msn, the 3rd line gives a an engaged signal.
I have unplugged 1
;echocancel=yes
;echotail=64
;callgroup=1
;deflect=12345678
devices=2
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Armin
Schindler
Sent: 18 May 2005 12:50
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] 2 x Eicon BRI
Sent: 18 May 2005 13:27
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
Hi
I can see what seems to be both devices in use, so I guess it must be
down to the capi.conf (below), does this look correct ???
[interfaces]
msn
