On Saturday 03 June 2006 14:06, Rick Smith wrote:
The call gets made, I leave a voicemail, or complete the call in some
manner, and the other side hangs up. I hear a busy signal on the phone
on my end.
I'll bet a donut it's not a busy signal but rather a fast busy which is
known as a
On Mon, 5 Jun 2006, Andrew Kohlsmith wrote:
I'll bet a donut it's not a busy signal but rather a fast busy which is
known as a congestion signal.
I'll be a jelly filled donut that it's the device he's using and not
asterisk sending the signal :) We have a few ATA's that don't
automatically
I've not seen an answer to this in any forum.
I make a call through Asterisk, with a VOIP phone, doesn't matter which.
The call gets made, I leave a voicemail, or complete the call in some
manner, and the other side hangs up. I hear a busy signal on the phone
on my end.
If I have an
- Rick Smith [EMAIL PROTECTED] wrote:
exten = 199,1,Answer()
exten = 199,2,Dial(SIP/100,20)
exten = 199,3,Hangup
why? And how to fix ? This is annoying...
This is handled entirely by your phone. Asterisk has already closed the channel
to the phone, so it
I think asterisk dropping you to s-BUSY, s-CONGESTED, s-UNREACHABLE
priority, better have a look there
(you can play a busy tone, or playback(called-party-is-busy))
A few employees have noticed some problem here and there when trying to
make outgoing phone calls. After it happens, they try
I'd change s,104 to something along the lines of a playback for debugging purposes just to be sure, but it looks as though all of your channels are busy. The way I am reading that is that you have 4 voice channels on your PRI, is that correct? Could you already have 4 simultaneous calls going on
You could try pri debug span 1 and watch for anything that looks strange.
Lacy Moore - Aspendora wrote:
I'd change s,104 to something along the lines of a playback for
debugging purposes just to be sure, but it looks as though all of your
channels are busy. The way I am reading that is that
Hey everyone,
A few employees have noticed some problem here and there when trying to
make outgoing phone calls. After it happens, they try again, and are
able to call through.
The dial plan for outbound calling looks like below. Which I know they
are getting to the Congestion part (which