Hi, i managed to connect to Ericsson MD110 with PRI at last.
And made a successful call thru asterisk to ericsson.
But when i try to call from ericsson to asterisk i got an error on
asterisk side.
And i couldnt figure out why.
Here's my extensions.conf about incoming calls.
[DID_span_1]
include
2009/3/19 Oguzhan Kayhan oguzh...@bilkent.edu.tr
Hi, i managed to connect to Ericsson MD110 with PRI at last.
And made a successful call thru asterisk to ericsson.
But when i try to call from ericsson to asterisk i got an error on
asterisk side.
And i couldnt figure out why.
Here's my
2009/3/19 Oguzhan Kayhan oguzh...@bilkent.edu.tr
Hi, i managed to connect to Ericsson MD110 with PRI at last.
And made a successful call thru asterisk to ericsson.
But when i try to call from ericsson to asterisk i got an error on
asterisk side.
And i couldnt figure out why.
Here's my
- Oguzhan Kayhan oguzh...@bilkent.edu.tr wrote:
Hi, as far as i know 's' is wildcard for all calls because as i see on
asteriskgui it is written as 's' (CatchAll) which means redirect all
calls to that extension.
That is not correct. The 's' extension only matches analog calls (because
sorry i cant help you :-(
i only can sugest add another peer in sip.conf in one use only audio and in
the other one use only T38.
you should post it again whit a subject like T38 problem or please
help!! t38 problem.
David
Sorry again.
2009/2/27 michel freiha mich...@gmail.com
Dear
paste your sip.conf.
David
2009/2/26 michel freiha mich...@gmail.com
Dear All,
I have created an inbound context in SIP .conf that forward incoming call
to opensips server...The problem appears as soon as I enable t38pt_udptl =
yes...The Asterisk negotiate the SIP session with OpenSIPS
Dear David,
Please find on http://pastebin.com/m69b8559d my sip.conf file
Thanks a lot
On Fri, Feb 27, 2009 at 1:05 PM, David fire ddf...@gmail.com wrote:
paste your sip.conf.
David
2009/2/26 michel freiha mich...@gmail.com
Dear All,
I have created an inbound context in SIP .conf that
Dear All,
I have created an inbound context in SIP .conf that forward incoming call to
opensips server...The problem appears as soon as I enable t38pt_udptl =
yes...The Asterisk negotiate the SIP session with OpenSIPS without adding
voice codec to INVITE packet...It just contains T.38
Hi,I have registered with IPKall ang got the number i.e., 206XXX. When I call to this number, It is telling that "The party you are calling is currently busy". Here I am giving my config details.When I registered with IPKall, I entered these below values:SIP Phone number: 7312567SIP Proxy:
Crazy Boy wrote:
I have given my total configuration. Please tell me the solution.
Looking forward to your response. Thank you.
You need to also include the output from the console.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
Von: Crazy Boy [mailto:[EMAIL PROTECTED]
Gesendet: Donnerstag, 7. September 2006 14:25
An: asterisk-users@lists.digium.com
Betreff: [asterisk-users] Incoming call problem-calling part is busy(IPKall)
Hi,
I have registered with IPKall ang got the number i.e., 206XXX. When I
call
bump from last week
Hi all,
I have 12 SIP phones at a particular site all connected to a local asterisk
server. It's in turn connected to 2 ISDN BRIs to provide up to 4 incoming
calls. An IAX gateway is used for outbound calls. At the moment, when an
incoming call comes in, asterisk dials every
Hi all,
I have 12 SIP phones at a particular site all connected to a local asterisk
server. It's in turn connected to 2 ISDN BRIs to provide up to 4 incoming
calls. An IAX gateway is used for outbound calls. At the moment, when an
incoming call comes in, asterisk dials every SIP phone like so:
Hello All,
I would be grateful for some help with this issue. I have
gotten Asterisk to work with Broadvoice on outgoing calls only. When I try to
call my Broadvoice number from another location I get a caller is busy
message. My Asterisk box is behind a Linksys WRT54G. Could this be
@lists.digium.com
Sent: Monday, February 07, 2005 8:36
AM
Subject: [Asterisk-Users] Incoming Call
Problem
Hello
All,
I would be grateful for some help
with this issue. I have gotten Asterisk to work with Broadvoice on
outgoing calls only. When I try to call my Broadvoice number
hi all
I have a x100p install in my server to conect my sip
extensions whith a PABX. When i call from a sip phone
to a pstn number it work well, but to call from pstn
line to asterisk only can do it to especific phone
doing this:
exten = s,1,Dial(SIP/116)
the problem is that i want to call any
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of R A
Sent: den 15 december 2004 21:20
To: Ning Zhou; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Incoming call problem
hi all
I have a x100p install in my
17 matches
Mail list logo