On Sat, 2005-02-12 at 12:20 +, JunkMail wrote:
For the single card I was using with isdntool for initialization,
wich
works fine but has no support for two cards.
Can anyone tell me exactly how to initialize the ISDN system manually
???
It all starts with modprobe -v hisax
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello!
After LOTS of research on this list and internet in general I managed
to get
an old Teles PCI card working with Asterisk throught ISDN4Linux.
No echos, no delays, simply perfect -- electronic poetry ! :)
eheheheheh
I just didn't get it to
On 12:20, Sat 12 Feb 05, JunkMail wrote:
It all starts with modprobe -v hisax type=21,21 (loading hisax and
telling
it that we'll use two teles pci cards)
and then ? what else ???
try adding protocol=2,2 (for euroisdn, replace with your
type)
--
Michiel van Baak
-
From: Michiel van Baak [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Saturday, February 12, 2005 12:41 PM
Subject: Re: [Asterisk-Users] Initializing two ISDN cards in isdn4linux
On 12:20, Sat 12 Feb 05, JunkMail wrote:
It all starts with modprobe -v hisax type=21,21
On 13:05, Sat 12 Feb 05, JunkMail wrote:
Sure !
But that's not the complete initialization of the isdn system.
With modprobe -v hisax type=21,21 protocol=2,2 ALONE, not even the first
card answers calls...
I just wonder what else does isdntool does to initialize the isdn
system...
Thank
PROBLEM SOLVED (read the rest)
Weird. That's all I did to get my two Fritz! cards working.
Only did the modprobe.
Er... that's really not enough (in this case, at least).
Asterisk will only be happy with the initialization when you can see all
four channels listed in the imon utility (from
