Hi,
For those that were having the same line noise problem that we were, an
update:
* Our TDM400P *was* sharing an IRQ, despite the output from 'cat
/proc/interrupts' showing that it wasn't. Running 'lspci -v'
showed that it was and we had to perform some card juggling to get
Excerpt of email from Digium support:
Digium does not support CAPI or BRI, either freely or commercially.
We can only provide support for you Digium TDM400P card.
Your zttest output is extemely low. We are looking for nothing less
than 99.98%. If you are receiving 99.96% this will
-Commercial Discussion
Subject: RE: [Asterisk-Users] Line Noise HELP!
And, what asterisk version are you running?
Ooops, sorry folks.. A correction..
I don't have digium X100 cards, I have Digit Networks X100P clone cards..
Don't know if it
matters, but wanted to get
Thanks for that Rich. Etheral trace is going to be almost impossible
for various reasons, but will try the other two options.
Can't find much online re. debugging - any chance of killing the box by
turning this on?
SIP show channels and the various CAPI show commands do not show
Hi Rich,
Hear your point about the trace and all, will try and figure something
out. Will also look at logging debug messages.
We did the unthinkable and purchased a support incident through Digium
and they have zeroed in on the zttest output, as per the info below
(I've pasted in an excerpt
Discussion
Subject: Re: [Asterisk-Users] Line Noise HELP!
Hi Rich,
Hear your point about the trace and all, will try and figure something
out. Will also look at logging debug messages.
We did the unthinkable and purchased a support incident through Digium
and they have zeroed in on the zttest
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 11 April 2005 10:48 am, Damian Funnell wrote:
Hi Paul, there was a thread yesterday in regards to a few of us
experiencing a very similar problem - a problem that (if the same for all
of us), doesn't seem to have been properly diagnosed
I recently hooked up my sipura IP phone and set it up as an SIP device to
connect to asterisk. I am able to dial a number on the SIP phone, connect to
an external number via the PSTN connected to asterisk and begin the
conversation. At first, the audio quality is PERFECT, in both directions. I
can
Hi Paul, there was a thread
yesterday in regards to a few of us experiencing a very similar problem
- a problem that (if the same for all of us), doesn't seem to have been
properly diagnosed yet.
One thing that appeared to be common to all of us was the version of
Asterisk that we are running
.
Paul
From: Damian Funnell [mailto:[EMAIL PROTECTED]
Sent: Monday, April 11, 2005 12:49
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Line Noise HELP!
Hi Paul, there was a thread
Discussion
Subject: Re: [Asterisk-Users] Line Noise HELP!
Hi Paul, there was a thread yesterday in
regards to a few of us
experiencing a very similar problem - a problem that (if the same for
all of
us), doesn't seem to have been properly diagnosed yet.
One thing that appeared
, April 11, 2005 3:08 PMTo:
[EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
DiscussionSubject: Re: [Asterisk-Users] Line Noise
HELP!Hi
mate,Interesting - you're using a different version of Asterisk than I
am, but your problem sounds identical. We thought it was the SIP
NormandinSent: Monday, April 11, 2005 5:06 PMTo:
Asterisk Users Mailing List - Non-Commercial DiscussionSubject: RE:
[Asterisk-Users] Line Noise HELP!
Hi,
I'm
having very similiar problems.. However, I'm running a development version,
and it happens on both SIP phones, and on Analog
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Line Noise HELP!
Hi Paul, there was a thread yesterday in regards to a few of us
experiencing a very similar problem - a problem that (if the same
for all of us), doesn't seem
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andre Normandin
Sent: Monday, April 11, 2005 5:06 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Line Noise HELP!
Hi,
I'm having very similiar problems.. However
Can't help but wonder if this isn't a bug in Asterisk or one of it's
modules, as there seems to be a lot of people experiencing the same
problem, seemingly with different hardware and software configurations.
Anyone know how (or if it's possible) to submit a bug report to Digium
Thanks for that Rich. Etheral trace is going to be almost impossible
for various reasons, but will try the other two options.
Can't find much online re. debugging - any chance of killing the box by
turning this on?
SIP show channels and the various CAPI show commands do not show
anything out
On Mon, 2005-04-11 at 17:06 -0400, Andre Normandin wrote:
Hi,
I'm having very similiar problems.. However, I'm running a development
version, and it happens on both SIP phones, and on Analog phones
connected via Sipura SPA-2000's (I have 2 different SPA2000's, and 4
analog lines.. Seems to
18 matches
Mail list logo
